720
edits
Changes
mLine 1:
Line 1: − ===Base information=== − ---- Line 47:
Line 45: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
no edit summary
SMS events functionality allows {{{model|FM36YX}}} to send a configured SMS when an event is
SMS events functionality allows {{{model|FM36YX}}} to send a configured SMS when an event is
triggered. This event can be triggered by:<br />
triggered. This event can be triggered by:<br />
Then go to GSM ->SMS -> SMS events window and activate SMS event for Enabled scenario.
Then go to GSM ->SMS -> SMS events window and activate SMS event for Enabled scenario.
Figure 38 shows how to enable Green Driving and Immobilizer SMS Events.
Figure 38 shows how to enable Green Driving and Immobilizer SMS Events.
''' FIGURE 38 '''
''' FIGURE 39 '''
When any of the scenarios events occurs, a text message will be sent to the predefined number.
TRIP
In order to configure Trip SMS events click on Trip window and Enable Trip feature (figure 40).
Then go to GSM -> SMS -> SMS Events settings and Enable Trip SMS event. After enabling SMS
Events (figure 41), trip event will be triggered and message sent, when Trip starts (GNSS speed
exceeds the speed in Start Speed (ex. 5 km/h) and when Trip stops, that is ignition is turned off
longer then the time written in Ignition Off Timeout (ex. 60 seconds).
''' FIGURE 40 '''
''' FIGURE 41 '''
Geofence
Geofence SMS event is triggered and message sent when the device exits and/or enters a
configured Geofence zone. The Geofence zone must be configured to generate an event On Exit,
On Enter or On Both (figure 42). If No Event is selected, then it is not possible to turn on SMS
events. If several zones are created then SMS events can be turned on separately for each zone
entering different text message.
''' FIGURE 42 '''
''' FIGURE 43 '''
AutoGeofence
SMS events for AutoGeofence are configured the same as in Geofence. AutoGeofence is in
Features -> Auto geofencing (figure 44), for SMS events configuration, go to GSM -> SMS -> SMS
Events (figure 45).
''' FIGURE 44 '''
''' FIGURE 45 '''
I/O events
FM3612 sends SMS event message when a configured I/O property enters and/or exits its
configured High/Low boundaries or Hysteresis event generation is chosen (Monitoring does not
generate event, so SMS event could not be configured). Every IO element SMS event can be
configured to send individual message to different numbers.
''' FIGURE 44 '''
''' FIGURE 45 '''
