Difference between revisions of "Template:FMB630 K-Line Data"
From Wiki Knowledge Base | Teltonika GPS
(Created page with "K-Line Data functionality allows user to monitor and use incoming data from Tachograph via K-line. Kline periodic record timeout paramater is used to set interval between K-Li...") |
|||
| (5 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | K-Line Data functionality allows user to monitor and use incoming data from Tachograph via K-line. Kline periodic record timeout paramater is used to set interval between K-Line records. Those records aren't included in standard record and will be sent as seperate packet. | |
| − | K-Line Data functionality allows user to monitor and use incoming data from Tachograph via K-line. Kline periodic record timeout | ||
To configure any K-Line parameter, every parameter should be separated with comma. | To configure any K-Line parameter, every parameter should be separated with comma. | ||
| Line 8: | Line 7: | ||
Other Kline properties can be configured in the same logic. | Other Kline properties can be configured in the same logic. | ||
| − | + | [[Image:kline_tab.png|none]] | |
| − | |||
| − | [[Image:kline_tab.png| | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 10:14, 4 June 2018
K-Line Data functionality allows user to monitor and use incoming data from Tachograph via K-line. Kline periodic record timeout paramater is used to set interval between K-Line records. Those records aren't included in standard record and will be sent as seperate packet.
To configure any K-Line parameter, every parameter should be separated with comma. For example, configuring first profile Kline Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID do not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.
