Changes

==Excessive Idling==

==Excessive Idling==

{{{pic_idling|[[Image:Fmb120_excessive_idling.png|right]]}}}

{{{pic_idling|[[Image:Fmb120_excessive_idling.png|300px|right]]}}}

When vehicle stops for a specific amount of time the scenario is activated, a record will be generated and digital output status will be changed to 1 when configured. You can configure the time it takes to turn on this scenario (''Time to Stopped''). Scenario is activated until the vehicle starts moving (movement is detected only by the accelerometer) and keeps moving for an amount of time that is configured. You can configure the time it takes to turn off this scenario (''Time to Moving'').

When vehicle stops for a specific amount of time the scenario is activated, a record will be generated and digital output status will be changed to 1 when configured. You can configure the time it takes to turn on this scenario (''Time to Stopped''). Scenario is activated until the vehicle starts moving (movement is detected only by the accelerometer) and keeps moving for an amount of time that is configured. You can configure the time it takes to turn off this scenario (''Time to Moving'').

==Towing Detection==

==Towing Detection==

[[Image:Fmb120_towing.png|right]]

[[Image:Fmb120_towing.png|300px|right]]

''Towing Detection'' feature helps to inform the driver about unexpected car movement when it was parked. {{{model|FMB1YX}}} generates an event when car is being towed or lifted, for example, in a case of vehicle evacuation. {{{model|FMB1YX}}} activates towing function when following conditions are met:

''Towing Detection'' feature helps to inform the driver about unexpected car movement when it was parked. {{{model|FMB1YX}}} generates an event when car is being towed or lifted, for example, in a case of vehicle evacuation. {{{model|FMB1YX}}} activates towing function when following conditions are met:

==Crash Detection==

==Crash Detection==

[[Image:Fmb120_crash.png|right]]

[[Image:Fmb120_crash.png|300px|right]]

If ''Crash Detection'' is enabled, it monitors acceleration on each axis which helps detecting an accident. ''Threshold'' and ''Duration'' values are set depending on the impact that is required to be detected. {{{model|FMB1YX}}} can detect events ranging between a slight tapping on the device (Threshold = 100 mG, Duration = 1 ms) and a severe accident (Threshold = 4000 mG, Duration = 5 ms).<br/>If ''Crash Trace'' is disabled a crash detection event will be generated (included into the sent record) only when scenario starts and finishes.<br/>If ''Crash Trace'' is enabled {{{model|FMB1YX}}} will collect acceleration data every 40 msec. Buffer is big enough to hold data for 5 seconds and in the event of Crash records will be generated from this buffer, following from these conditions:

If ''Crash Detection'' is enabled, it monitors acceleration on each axis which helps detecting an accident. ''Threshold'' and ''Duration'' values are set depending on the impact that is required to be detected. {{{model|FMB1YX}}} can detect events ranging between a slight tapping on the device (Threshold = 100 mG, Duration = 1 ms) and a severe accident (Threshold = 4000 mG, Duration = 5 ms).<br/>If ''Crash Trace'' is disabled a crash detection event will be generated (included into the sent record) only when scenario starts and finishes.<br/>If ''Crash Trace'' is enabled {{{model|FMB1YX}}} will collect acceleration data every 40 msec. Buffer is big enough to hold data for 5 seconds and in the event of Crash records will be generated from this buffer, following from these conditions: