Difference between revisions of "Template:FMA Sleep modes"
Kudalevas.da (talk | contribs) |
|||
(6 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
− | {{{txt_sleepmodes|There are | + | {{{txt_sleepmodes|There are four sleep modes: GPS sleep, Deep sleep, Online Deep sleep and Ultra Deep sleep mode.}}} |
==Sleep mode== | ==Sleep mode== | ||
− | {{{model|FMB1YX}}} is able to go to sleep mode after configurable Sleep timeout.<br/>Sleep mode timeout starts counting when device is in STOP mode. After timeout is reached and all conditions for sleep mode are met, the device goes into sleep mode. When in sleep mode, {{{model|FMB1YX}}} turns GPS module off and | + | {{{model|FMB1YX}}} is able to go to sleep mode after configurable Sleep timeout.<br/>Sleep mode timeout starts counting when device is in STOP mode. After timeout is reached and all conditions for sleep mode are met, the device goes into sleep mode. When in sleep mode, {{{model|FMB1YX}}} turns GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>{{{model|FMB1YX}}} will enter sleep mode if ALL of these conditions are met: |
* {{{model|FMB1YX}}} is configured to work in Sleep mode and sleep timeout is reached; | * {{{model|FMB1YX}}} is configured to work in Sleep mode and sleep timeout is reached; | ||
* Device time is synchronized with GNSS satellites and GPS fix is obtained; | * Device time is synchronized with GNSS satellites and GPS fix is obtained; | ||
Line 22: | Line 22: | ||
{{{txt_ignition|* Ignition (configured ignition source) is off;}}} | {{{txt_ignition|* Ignition (configured ignition source) is off;}}} | ||
* Movement is not detected by the accelerometer{{{txt_movement| or configured movement source}}}; | * Movement is not detected by the accelerometer{{{txt_movement| or configured movement source}}}; | ||
− | * ''Min. Record Saving Period'' ({{{model|FMB1YX}}} Data acquisition | + | * ''Min. Record Saving Period'' ({{{ctrDaq|[[{{{model|FMB1YX}}} Data acquisition settings|Data Acquisition Mode settings]]}}}) must be larger than ''Open Link Timeout'' parameter, so that {{{model|FMB1YX}}} could close GPRS link; |
− | * The difference between ''Send Period'' ({{{model|FMB1YX}}} Data Acquisition Mode settings) and ''Open Link Timeout'' must be more than 90 seconds, so that {{{model|FMB1YX}}} could close GPRS link within at least 90 seconds; | + | * The difference between ''Send Period'' ({{{ctrDaq|[[{{{model|FMB1YX}}} Data acquisition settings|Data Acquisition Mode settings]]}}}) and ''Open Link Timeout'' must be more than 90 seconds, so that {{{model|FMB1YX}}} could close GPRS link within at least 90 seconds; |
+ | * Forced wakeup is not set; | ||
+ | * There are no SMS messages being received; | ||
* Data socket(s) are closed; | * Data socket(s) are closed; | ||
* Data sending is not in progress; | * Data sending is not in progress; | ||
Line 32: | Line 34: | ||
* Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected; | * Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected; | ||
{{{txt_ignition|* Ignition (configured ignition source) is turned on.}}} | {{{txt_ignition|* Ignition (configured ignition source) is turned on.}}} | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |} | + | ==Online Deep Sleep mode== |
+ | In this mode the device works as in deep sleep mode, but without deregistering from GSM network. GSM part stays powered so this increases power consumption. In this mode device should send/receive SMS and make/accept calls. It does not close GPRS context if one was previously opened. | ||
+ | Conditions to enter online deep sleep mode are the same as entering deep sleep mode. | ||
+ | {{{model|FMB1YX}}} exits online sleep mode if {{{txt_exit|ONE of following conditions}}} is true: | ||
+ | * Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected; | ||
+ | {{{txt_ignition|* Ignition (configured ignition source) is turned on.}}} | ||
+ | |||
+ | {{{ultra_ds|==Ultra Deep Sleep mode== | ||
+ | Conditions to enter ultra deep sleep mode, where GPS and GSM modem are turned off and device functions are suspended for maximum battery saving, are the same as entering deep sleep mode.<br/>{{{model|FMB1YX}}} exits ultra deep sleep mode only when {{{txtIgnition|DIN1 and movement are}}} detected by accelerometer. Movement source {{{txt_ignition|and Ignition source configuration }}}is not taken into account in this case.}}} |
Revision as of 15:11, 21 August 2018
There are four sleep modes: GPS sleep, Deep sleep, Online Deep sleep and Ultra Deep sleep mode.
Sleep mode
FMB1YX is able to go to sleep mode after configurable Sleep timeout.
Sleep mode timeout starts counting when device is in STOP mode. After timeout is reached and all conditions for sleep mode are met, the device goes into sleep mode. When in sleep mode, FMB1YX turns GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.
FMB1YX will enter sleep mode if ALL of these conditions are met:
- FMB1YX is configured to work in Sleep mode and sleep timeout is reached;
- Device time is synchronized with GNSS satellites and GPS fix is obtained;
- Movement is not detected by the accelerometer or configured movement source;
- Ignition (configured ignition source) is off;
FMB1YX exits GPS sleep mode if ONE of following conditions is true:
- Movement by accelerometer or configured movement source is detected;
- Ignition (configured ignition source) is turned on.
- USB cable is connected.
Deep Sleep mode
While in deep sleep mode, FMB1YX sets the GNSS receiver to sleep mode and turns off GSM/GPRS module (hence it is not possible to wake up device via SMS). Despite records with last known coordinate being saved and sent to AVL server (GSM/GPRS module is turned on to send data and then it is turned off), power usage is decreased to save vehicle's battery. Please note that power saving depends on two configurable parameters: Send Period and Minimum Record Saving Period in "X on Stop Mode". When records are sent successfully in deep sleep mode, open link timeout counter will be skipped and FMB1YX will enter deep sleep mode immediately.
Because a lot of functions are disabled in deep sleep mode following I/O elements are disabled from records that are generated in this mode: GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, GSM CellID, GSM Area Code, Active GSM Operator, Trip Odometer, Total Odometer, Speed, Fuel Rate GPS, Fuel Used GPS and ICCID.
FMB1YX can enter deep sleep mode if ALL of these conditions are met:
- FMB1YX is configured in Deep Sleep mode and sleep timeout is reached;
- Device time is synchronized with GNSS satellites and GPS fix is obtained;
- Ignition (configured ignition source) is off;
- Movement is not detected by the accelerometer or configured movement source;
- Min. Record Saving Period (Data Acquisition Mode settings) must be larger than Open Link Timeout parameter, so that FMB1YX could close GPRS link;
- The difference between Send Period (Data Acquisition Mode settings) and Open Link Timeout must be more than 90 seconds, so that FMB1YX could close GPRS link within at least 90 seconds;
- Forced wakeup is not set;
- There are no SMS messages being received;
- Data socket(s) are closed;
- Data sending is not in progress;
- FOTA is not in progress.
FMB1YX exits deep sleep mode if ONE of following conditions is true:
- Movement by accelerometer or configured movement source is detected;
- Ignition (configured ignition source) is turned on.
Online Deep Sleep mode
In this mode the device works as in deep sleep mode, but without deregistering from GSM network. GSM part stays powered so this increases power consumption. In this mode device should send/receive SMS and make/accept calls. It does not close GPRS context if one was previously opened. Conditions to enter online deep sleep mode are the same as entering deep sleep mode. FMB1YX exits online sleep mode if ONE of following conditions is true:
- Movement by accelerometer or configured movement source is detected;
- Ignition (configured ignition source) is turned on.
Ultra Deep Sleep mode
Conditions to enter ultra deep sleep mode, where GPS and GSM modem are turned off and device functions are suspended for maximum battery saving, are the same as entering deep sleep mode.
FMB1YX exits ultra deep sleep mode only when DIN1 and movement are detected by accelerometer. Movement source and Ignition source configuration is not taken into account in this case.