Difference between revisions of "Template:FMB630 Dual SIM"

From Wiki Knowledge Base | Teltonika GPS
m
(Created page with "==Introduction to Dual SIM functionality== {{{model|FMB630}}} is able to operate in DUAL SIM switching mode to minimize the bill accounts for GSM/GPRS services. To use this mo...")
Line 1: Line 1:
==Introduction to Dual SIM Functionality==
+
==Introduction to Dual SIM functionality==
 
{{{model|FMB630}}} is able to operate in DUAL SIM switching mode to minimize the bill accounts for
 
{{{model|FMB630}}} is able to operate in DUAL SIM switching mode to minimize the bill accounts for
 
GSM/GPRS services. To use this mode, 2 SIM Operator list enumerated value must be chosen for
 
GSM/GPRS services. To use this mode, 2 SIM Operator list enumerated value must be chosen for
Profile Change.
+
Profile Change On setting in Global parameters tab after {{{model|FMB630}}} is connected to configurator
 +
(shown in Figure 49).
 
When DUAL SIM operating mode is set: profile 1 becomes Home, profile 2 becomes SIM 1
 
When DUAL SIM operating mode is set: profile 1 becomes Home, profile 2 becomes SIM 1
 
Roaming, profile 3 becomes SIM 2 Roaming and profile 4 becomes Unknown Operator. In this
 
Roaming, profile 3 becomes SIM 2 Roaming and profile 4 becomes Unknown Operator. In this
 
chapter the operation and configuration of DUAL SIM mode is presented.
 
chapter the operation and configuration of DUAL SIM mode is presented.
 
* '''Home Network'''
 
 
{{{model|FMB630}}} gets possible operator codes list from the network and compares them with the operator codes
 
inserted in Home profile’s list. At first, it tries to connect to SIM 1 Home Operator, if operator is
 
unreachable; the device switches to SIM 2 slot and tries to connect to SIM 2 Home Operator.
 
When the connection procedure is successful, FMB630 stays connected to the available
 
Home operator using the SIM card, which was inserted for and works according to the Home
 
profile parameter settings.
 
If none of the Home operators could be connected with, FMB630 switches to the SIM 1
 
card tries to connect to its roaming operators from SIM 1 Roaming profile.
 

Revision as of 15:51, 19 October 2018

Introduction to Dual SIM functionality

FMB630 is able to operate in DUAL SIM switching mode to minimize the bill accounts for GSM/GPRS services. To use this mode, 2 SIM Operator list enumerated value must be chosen for Profile Change On setting in Global parameters tab after FMB630 is connected to configurator (shown in Figure 49). When DUAL SIM operating mode is set: profile 1 becomes Home, profile 2 becomes SIM 1 Roaming, profile 3 becomes SIM 2 Roaming and profile 4 becomes Unknown Operator. In this chapter the operation and configuration of DUAL SIM mode is presented.