* Every second with IO's, configured in I/O settings, under "Event only" parameter
* Every second with IO's, configured in I/O settings, under "Event only" parameter
* With frequency defined by ''Trace ODR (Hz)'' parameter <br/>
* With frequency defined by ''Trace ODR (Hz)'' parameter <br/>
−
+
* Each record will have accurate timestamps in milliseconds. <br/>
−
If ''Crash Trace'' is enabled {{{model|FMB1YX}}} will collect acceleration data every 40 miliseconds. Buffer is big enough to hold data for 5 seconds and in the event of Crash records will be generated from this buffer, following from these conditions:
−
* Every second that acceleration changed more than 50mG, the data will be collected and records will be generated for a duration of 5 seconds after the event.
−
* Every generated record will have accelerometer X Y Z values included.
−
* Each record will have accurate timestamps in milliseconds.