Changes
Template:FMB9 Mounting recommendations (view source)
Revision as of 02:39, 1 December 2018
, 02:39, 1 December 2018→Mounting recommendations
** If the wire is fixed with the bolt, the loop must be connected to the end of the wire.
** If the wire is fixed with the bolt, the loop must be connected to the end of the wire.
** For better contact scrub paint from the spot where loop is going to be connected.
** For better contact scrub paint from the spot where loop is going to be connected.
{|
|-
| [[File:Alert.png|left|link=]] || <b>PAY ATTENTION! Connecting the power supply must be carried out in a very low impedance point of on-board vehicle network. These points in the car are the battery terminals. Therefore, we recommend connecting the power of {{{model|FMB9}}} (GND and POWER wires) directly to the battery terminals. Another valid option is to connect the wires to the main POWER cable inside the fuse box (if there is none, then to the power supply where the fuses of vehicle’s computer are), GND wire must be connected in a special point, designed to connect GND vehicle computer. Connecting the GND at an arbitrary point to the mass of the car is unacceptable, as static and dynamic potentials on the line GND will be unpredictable, which can lead to unstable {{{model|FMB9}}} operation and even its failure.</b>
|}
==<span style=color:#FF0000>'''Safety information'''</span>==
==<span style=color:#FF0000>'''Safety information'''</span>==
This message contains information on how to operate {{{model|FMB1YX}}} safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!<br/>
This message contains information on how to operate {{{model|FMB9}}} safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
*The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is {{{voltage|+6..+30}}} V DC.<br/>
*The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is {{{voltage|+6..+30}}} V DC.
*To avoid mechanical damage, it is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.<br/>
*To avoid mechanical damage, it is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.
*When connecting the connection (1x5) cables to the vehicle, the appropriate jumpers of the power supply of the vehicle should be disconnected.<br/>
*When connecting the connection (1x5) cables to the vehicle, the appropriate jumpers of the power supply of the vehicle should be disconnected.
*Before dismounting the device from the vehicle, the 1x5 connection must be disconnected.<br/>
*Before dismounting the device from the vehicle, the 1x5 connection must be disconnected.
*The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 60950-1 standard.<br/>
*The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 60950-1 standard.
*The device {{{model|FMB1YX}}} is not designed as a navigational device for boats.<br/>
*The device {{{model|FMB9}}} is not designed as a navigational device for boats.
===<span style=color:#104996>Precautions</span>===
===Precautions===
{| class="wikitable" style="border-style: solid; border-width: 0px"
{| class="wikitable" style="border-style: solid; border-width: 0px"
|+
|+
|-
|-
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_nb.png|50px]]
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_nb.png|50px]]
| style="text-align: left; background: #F6F6FB;" | Do not disassemble the device. If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the power supply.
| style="text-align: left; background: #F6F6FB;" | '''Do not disassemble the device. If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the power supply.'''
|-
|-
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_nb.png|50px]]
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_nb.png|50px]]
| style="text-align: left; background: #F6F6FB;" | All wireless data transferring devices produce interference that may affect other devices which are placed nearby.
| style="text-align: left; background: #F6F6FB;" | '''All wireless data transferring devices produce interference that may affect other devices which are placed nearby.'''
|-
|-
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_key.png|50px]]
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_key.png|50px]]
| style="text-align: left; background: #F6F6FB;" | The device must be connected only by qualified personnel.
| style="text-align: left; background: #F6F6FB;" | '''The device must be connected only by qualified personnel.'''
|-
|-
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_tick.png|50px]]
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_tick.png|50px]]
| style="text-align: left; background: #F6F6FB;" | The device must be firmly fastened in a predefined location.
| style="text-align: left; background: #F6F6FB;" | '''The device must be firmly fastened in a predefined location.'''
|-
|-
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_tick.png|50px]]
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_tick.png|50px]]
| style="text-align: left; background: #F6F6FB;" | The programming must be performed using a PC with autonomic power supply.
| style="text-align: left; background: #F6F6FB;" | '''The programming must be performed using a PC with autonomic power supply.'''
|-
|-
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_humidity.png|50px]]
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_humidity.png|50px]]
| style="text-align: left; background: #F6F6FB;" | The device is susceptible to water and humidity.
| style="text-align: left; background: #F6F6FB;" | '''The device is susceptible to water and humidity.'''
|-
|-
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_ecute.png|50px]]
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_ecute.png|50px]]
| style="text-align: left; background: #F6F6FB;" | Installation and/or handling during a lightning storm is prohibited.
| style="text-align: left; background: #F6F6FB;" | '''Installation and/or handling during a lightning storm is prohibited.'''
|}
|}
