Difference between revisions of "Template:FMB First start config"

From Wiki Knowledge Base | Teltonika GPS
(37 intermediate revisions by 14 users not shown)
Line 1: Line 1:
−
{{{PCConnection|
 
 
===PC Connection (Windows)===
 
===PC Connection (Windows)===
  
−
{{{fmb_powerup|# Power-up {{{model|FMB1YX}}} with '''DC voltage {{{dc_voltage|(10 – 30 V)}}}''' power supply {{{additional_power_supply|}}} using '''{{{power_cable|supplied power cable}}}'''. LED’s should start blinking, see “'''{{{led_status_link|LED behaviour description}}}'''”.}}}  
+
{{{TST100_powerup|# Power-up {{{model|TST100}}} with '''DC voltage {{{dc_voltage|(10 – 45 V)}}}''' power supply using '''{{{power_cable|supplied power cable}}}'''. LED’s should start blinking, see “'''{{{led_status_link|LED behaviour description}}}'''”.}}}  
−
# Connect device to computer using '''{{{usb_cable|Micro-USB}}} cable'''{{{Bluetooth®_connection| or '''Bluetooth®''' connection:
+
# Connect device to computer using '''{{{usb_cable|Micro-USB}}} cable'''
 
#* Using '''{{{usb_cable|Micro-USB}}} cable'''
 
#* Using '''{{{usb_cable|Micro-USB}}} cable'''
 
#** You will need to install USB drivers, see "[[#How to install USB drivers (Windows)|'''How to install USB drivers (Windows)''']]"
 
#** You will need to install USB drivers, see "[[#How to install USB drivers (Windows)|'''How to install USB drivers (Windows)''']]"
−
#* Using '''Bluetooth®'''
 
−
#** {{{model|FMB1YX}}} Bluetooth® is enabled by default. Turn on '''Bluetooth®''' on your PC, then select '''Add Bluetooth® or other device > Bluetooth®'''. Choose your device named – “'''{{{model|FMB1YX}}}_last_7_imei_digits'''”, without '''LE''' in the end. Enter default password '''5555''', press '''Connect''' and then select '''Done'''.}}}
 
 
# You are now ready to use the device on your computer.
 
# You are now ready to use the device on your computer.
−
}}}
+
 
 
===How to install USB drivers (Windows)===
 
===How to install USB drivers (Windows)===
  
−
# Please download COM port drivers from '''[[Media:TeltonikaCOMDriver.zip|here]]'''.
+
# Please download COM port drivers from Teltonika '''[https://teltonika.lt/downloads/en/fmb120/TeltonikaCOMDriver.zip here]'''.
 
# Extract and run '''TeltonikaCOMDriver.exe'''.
 
# Extract and run '''TeltonikaCOMDriver.exe'''.
 
# Click '''Next''' in driver installation window.
 
# Click '''Next''' in driver installation window.
Line 20: Line 17:
 
===Configuration (Windows)===
 
===Configuration (Windows)===
  
−
At first {{{model|FMB1YX}}} device will have default factory settings set. These settings should be changed according to the user's needs.<br/>
+
At first {{{model|TST}}} device will have default factory settings set. These settings should be changed according to the user's needs.<br/>
−
Main configuration can be performed via '''[[Teltonika Configurator]]''' software. Get the latest {{{model|FMB1YX}}} '''Configurator''' version from '''[[{{{SAS_Configurator_Versions|Teltonika Configurator versions}}}|here]]'''. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
+
Main configuration can be performed via '''[[Teltonika Configurator]]''' software. Get the latest {{{model|TST100}}} '''Configurator''' version from '''[[Teltonika Configurator versions|here]]'''. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
  
 
{| class="wikitable" style="width:50%;"
 
{| class="wikitable" style="width:50%;"
Line 38: Line 35:
 
<li>Windows 10</li>
 
<li>Windows 10</li>
 
</ul>
 
</ul>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | {{{MS .NET Framework|MS .NET Framework 5.0}}}
+
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | MS .NET Framework 4.6.2
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 32 and 64 bit
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 32 and 64 bit
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | {{{MS .NET Framework link|[https://dotnet.microsoft.com/en-us/download/dotnet-framework/net462 .NET Framework]}}}
+
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [https://www.microsoft.com/en-us/download/confirmation.aspx?id=53344 www.microsoft.com]
 
|}
 
|}
  
−
Downloaded '''Configurator''' will be in compressed archive. Extract it and launch '''Configurator.exe'''. After launch software language can be changed by clicking [[File:Language_logo.png|25px|link=]] in the right bottom corner:
+
Downloaded '''Configurator''' will be in compressed archive. Extract it and launch '''Configurator.exe'''. After launch software language can be changed by clicking [[File:Language_icon.png|25px|link=]] in the right bottom corner:
  
−
[[File:FMB_Configurator_languag.jpg|400px]]
+
[[File:FMB_Configurator_language.jpg|400px]]
  
 
Configuration process begins by pressing on connected device:
 
Configuration process begins by pressing on connected device:
  
−
[[File:{{{cfg_connect|Configurator_connect-FMB150.jpg}}}|400px]]
+
[[File:{{{cfg_connect|Tst100co.png}}}|400px]]
  
 
After connection to Configurator '''Status window''' will be displayed:
 
After connection to Configurator '''Status window''' will be displayed:
−
{{{Status window image|[[Image:{{{model|FMB120}}} Beacon-info-{{{family|FMB1}}} series.png|1000px|none]]}}}
 
  
 +
[[Image:{{{first_time|FMB_status_screen-FMB130.jpg}}}|1000px|none]]
  
−
Various '''[[{{{model|FMB1YX}}}_Status_info|Status window]]''' tabs display information about '''[[{{{model|FMB1YX}}}_Status_info#GNSS_Info|GNSS]], [[{{{model|FMB1YX}}}_Status_info#GSM_Info|GSM]], [[{{{model|FMB1YX}}}_Status_info#I.2FO_Info|I/O]], [[{{{model|FMB1YX}}}_Status_info#Maintenance|Maintenance]]''' and etc. {{{model|FMB1YX}}} has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using '''Save to device''' button. Main buttons offer following functionality:<br/>
+
Various '''[[{{{model|TST100}}}_Status_info|Status window]]''' tabs display information about '''[[{{{model|FMB1YX}}}_Status_info#GNSS_Info|GNSS]], [[{{{model|FMB1YX}}}_Status_info#GSM_Info|GSM]], [[{{{model|FMB1YX}}}_Status_info#I.2FO_Info|I/O]], [[{{{model|FMB1YX}}}_Status_info#Maintenance|Maintenance]]''' and etc. {{{model|TST100}}} has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using '''Save to device''' button. Main buttons offer following functionality:<br/>
 
# [[File:Load_from_device.png|25px|link=]] '''Load from device''' – loads configuration from device.
 
# [[File:Load_from_device.png|25px|link=]] '''Load from device''' – loads configuration from device.
 
# [[File:Save_to_device.png|25px|link=]] '''Save to device''' – saves configuration to device.
 
# [[File:Save_to_device.png|25px|link=]] '''Save to device''' – saves configuration to device.
 
# [[File:Load_from_file.png|25px|link=]] '''Load from file''' – loads configuration from file.
 
# [[File:Load_from_file.png|25px|link=]] '''Load from file''' – loads configuration from file.
 
# [[File:Save_to_file.png|25px|link=]] '''Save to file''' – saves configuration to file.
 
# [[File:Save_to_file.png|25px|link=]] '''Save to file''' – saves configuration to file.
−
# {{{Firmware_button| [[File:Firmware_update.png|25px|link=]] '''Update firmware''' – updates firmware on device.}}}
+
# [[File:Firmware_update.png|25px|link=]] '''Update firmware''' – updates firmware on device.
 
# [[File:Read_records.png|25px|link=]] '''Read records''' – read records from device.
 
# [[File:Read_records.png|25px|link=]] '''Read records''' – read records from device.
 
# [[File:Reboot_device.png|25px|link=]] '''Reboot device''' – restarts device.
 
# [[File:Reboot_device.png|25px|link=]] '''Reboot device''' – restarts device.
 
# [[File:Reset_configuration.png|25px|link=]] '''Reset configuration''' – sets device configuration to default.
 
# [[File:Reset_configuration.png|25px|link=]] '''Reset configuration''' – sets device configuration to default.
  
−
Most important configurator section is GPRS – where all your server and '''[[{{{model|FMB1YX}}}_GPRS_settings|GPRS settings]]''' can be configured and '''[[{{{model|FMB1YX}}}_Data_acquisition_settings|Data Acquisition]]''' – where data acquiring parameters can be configured.
+
Most important configurator section is GPRS – where all your server and '''[[{{{model|TST100}}}_GPRS_settings|GPRS settings]]''' can be configured and '''[[{{{model|TST100}}}_Data_acquisition_settings|Data Acquisition]]''' – where data acquiring parameters can be configured.
−
More details about {{{model|FMB1YX}}} configuration using Configurator can be found '''{{{config_link|in the manual}}}'''.
+
More details about {{{model|TST100}}} configuration using Configurator can be found '''{{{config_link|in the manual}}}'''.
  
 
===Quick SMS configuration===
 
===Quick SMS configuration===
Line 73: Line 70:
 
Quickly set up your device by sending this SMS command to it:
 
Quickly set up your device by sending this SMS command to it:
  
−
  "  setparam <span style="background-color:#91b9d4;">2001</span>:APN;<span style="background-color:#91d4b9;">2002</span>:APN_username;<span style="background-color:#b991d4;">2003</span>:APN_password;<span style="background-color:#b9d491;">2004</span>:Domain;<span style="background-color:#d491b9;">2005</span>:Port;<span style="background-color:#d4b991;">2006</span>:0"
+
  "  setparam <span style="background-color:#91b9d4;">2001</span>:APN;<span style="background-color:#91d4b9;">2002</span>:APN_username;<span style="background-color:#b991d4;">2003</span>:APN_password;<span style="background-color:#b9d491;">2004</span>:Domain;<span style="background-color:#d491b9;">2005</span>:Port;<span style="background-color:#d4b991;">2006</span>;0"
  
 
<div style="column-count:2;-moz-column-count:2;-webkit-column-count:2">
 
<div style="column-count:2;-moz-column-count:2;-webkit-column-count:2">
Line 134: Line 131:
  
 
<br/>
 
<br/>
−
<p>After successful SMS configuration, {{{model|FMB1YX}}} device will '''synchronize time''' and '''update records''' to '''configured server'''. Time intervals and default I/O elements can be changed by using [[Teltonika Configurator]] or {{{SMS/GPRS Commands|[[Template:FMB Device Family Parameter list|SMS parameters]]}}}.</p>
+
<p>After successful SMS configuration, {{{model|FMB1YX}}} device will '''synchronize time''' and '''update records''' to '''configured server'''. Time intervals and default I/O elements can be changed by using [[Teltonika Configurator]] or [[{{{model|FMB1YX}}} Parameter list|SMS parameters]].</p>

Revision as of 07:55, 6 May 2019

PC Connection (Windows)

  1. Power-up TST100 with DC voltage (10 – 45 V) power supply using supplied power cable. LED’s should start blinking, see “LED behaviour description”.
  2. Connect device to computer using Micro-USB cable
  3. You are now ready to use the device on your computer.

How to install USB drivers (Windows)

  1. Please download COM port drivers from Teltonika here.
  2. Extract and run TeltonikaCOMDriver.exe.
  3. Click Next in driver installation window.
  4. In the following window click Install button.
  5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup.

Configuration (Windows)

At first TST device will have default factory settings set. These settings should be changed according to the user's needs.
Main configuration can be performed via Teltonika Configurator software. Get the latest TST100 Configurator version from here. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.

MS .NET requirements
Operating system MS .NET Framework version Version Link
  • Windows Vista
  • Windows 7
  • Windows 8.1
  • Windows 10
 MS .NET Framework 4.6.2 32 and 64 bit www.microsoft.com

Downloaded Configurator will be in compressed archive. Extract it and launch Configurator.exe. After launch software language can be changed by clicking Language icon.png in the right bottom corner:

FMB Configurator language.jpg

Configuration process begins by pressing on connected device:

400px

After connection to Configurator Status window will be displayed:

FMB status screen-FMB130.jpg

Various Status window tabs display information about GNSS, GSM, I/O, Maintenance and etc. TST100 has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save to device button. Main buttons offer following functionality:

  1. Load from device.png Load from device – loads configuration from device.
  2. Save to device.png Save to device – saves configuration to device.
  3. Load from file.png Load from file – loads configuration from file.
  4. Save to file.png Save to file – saves configuration to file.
  5. Firmware update.png Update firmware – updates firmware on device.
  6. Read records.png Read records – read records from device.
  7. Reboot device.png Reboot device – restarts device.
  8. Reset configuration.png Reset configuration – sets device configuration to default.

Most important configurator section is GPRS – where all your server and GPRS settings can be configured and Data Acquisition – where data acquiring parameters can be configured. More details about TST100 configuration using Configurator can be found in the manual.

Quick SMS configuration

Default configuration has optimal parameters present to ensure best performance of track quality and data usage.
Quickly set up your device by sending this SMS command to it: 

"  setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006;0"

GPRS settings:

  • 2001 – APN
  • 2002 – APN username (if there are no APN username, empty field should be left)
  • 2003 – APN password (if there are no APN password, empty field should be left)

Server settings:

  • 2004 – Domain
  • 2005 – Port
  • 2006 – Data sending protocol (0 – TCP, 1 – UDP)

Note: Before SMS text, two space symbols should be inserted.

IOS sms cfg.png
Default configuration settings
Movement and ignition detection:
Accelerometer.png Vehicle movement will be detected by accelerometer Ignition detection-2-2.png Ignition will be detected by vehicle power voltage between 13,2 – 30 V
Device makes a record On Moving if one of these events happen:
300s icon 2.png 300 seconds passes Angle 10 2.png Vehicle turns 10° degrees
Min distance.png Vehicle drives 100 meters Speed delta.png Speed difference between last coordinate and current position is greater than 10 km/h
Device makes a record On Stop if:
1h icon.png 1 hour passes while vehicle is stationary and ignition is off
Records sending to server:
120 s.png If device has made a record it is sent to the server every 120 seconds


After successful SMS configuration, FMB1YX device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator or SMS parameters.

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB_First_start_config&oldid=34288"