Difference between revisions of "Template:FMB First start config"

From Wiki Knowledge Base | Teltonika GPS
(32 intermediate revisions by 13 users not shown)
Line 1: Line 1:
−
{{{PCConnection|
 
 
===PC Connection (Windows)===
 
===PC Connection (Windows)===
  
−
{{{fmb_powerup|# Power-up {{{model|FMB1YX}}} with '''DC voltage {{{dc_voltage|(10 – 30 V)}}}''' power supply {{{additional_power_supply|}}} using '''{{{power_cable|supplied power cable}}}'''. LED’s should start blinking, see “'''{{{led_status_link|LED behaviour description}}}'''”.}}}  
+
{{{TST100_powerup|# Power-up {{{model|TST100}}} with '''DC voltage {{{dc_voltage|(9 – 50 V)}}}''' power supply using '''{{{power_cable|supplied power cable}}}'''. LED’s should start blinking, see “'''{{{led_status_link|LED behaviour description}}}'''”.}}}  
−
# Connect device to computer using '''{{{usb_cable|Micro-USB}}} cable'''{{{Bluetooth®_connection| or '''Bluetooth®''' connection:
+
# Connect device to computer using '''{{{usb_cable|Micro-USB}}} cable'''
 
#* Using '''{{{usb_cable|Micro-USB}}} cable'''
 
#* Using '''{{{usb_cable|Micro-USB}}} cable'''
 
#** You will need to install USB drivers, see "[[#How to install USB drivers (Windows)|'''How to install USB drivers (Windows)''']]"
 
#** You will need to install USB drivers, see "[[#How to install USB drivers (Windows)|'''How to install USB drivers (Windows)''']]"
−
#* Using '''Bluetooth®'''
 
−
#** {{{model|FMB1YX}}} Bluetooth® is enabled by default. Turn on '''Bluetooth®''' on your PC, then select '''Add Bluetooth® or other device > Bluetooth®'''. Choose your device named – “'''{{{model|FMB1YX}}}_last_7_imei_digits'''”, without '''LE''' in the end. Enter default password '''5555''', press '''Connect''' and then select '''Done'''.}}}
 
 
# You are now ready to use the device on your computer.
 
# You are now ready to use the device on your computer.
−
}}}
+
 
 
===How to install USB drivers (Windows)===
 
===How to install USB drivers (Windows)===
  
−
# Please download COM port drivers from '''[[Media:TeltonikaCOMDriver.zip|here]]'''.
+
# Please download COM port drivers from Teltonika '''[https://teltonika.lt/downloads/en/fmb120/TeltonikaCOMDriver.zip here]'''.
 
# Extract and run '''TeltonikaCOMDriver.exe'''.
 
# Extract and run '''TeltonikaCOMDriver.exe'''.
 
# Click '''Next''' in driver installation window.
 
# Click '''Next''' in driver installation window.
Line 18: Line 15:
 
# Setup will continue installing the driver and eventually the confirmation window will appear. Click '''Finish''' to complete the setup.
 
# Setup will continue installing the driver and eventually the confirmation window will appear. Click '''Finish''' to complete the setup.
  
−
===Configuration (Windows)===
+
===How to install USB drivers (Windows)===
  
−
At first {{{model|FMB1YX}}} device will have default factory settings set. These settings should be changed according to the user's needs.<br/>
+
# Please download COM port drivers from Teltonika '''[https://teltonika.lt/downloads/en/fmb120/TeltonikaCOMDriver.zip here]'''.
−
Main configuration can be performed via '''[[Teltonika Configurator]]''' software. Get the latest {{{model|FMB1YX}}} '''Configurator''' version from '''[[{{{SAS_Configurator_Versions|Teltonika Configurator versions}}}|here]]'''. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
+
# Extract and run '''TeltonikaCOMDriver.exe'''.
−
 
+
# Click '''Next''' in driver installation window.
−
{| class="wikitable" style="width:50%;"
+
# In the following window click '''Install''' button.
−
|+
+
# Setup will continue installing the driver and eventually the confirmation window will appear. Click '''Finish''' to complete the setup.
−
! colspan="4" style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| MS .NET requirements
 
−
|-
 
−
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Operating system
 
−
! style="width:25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| MS .NET Framework version
 
−
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Version
 
−
! style="width:5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Link
 
−
|-
 
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <ul style="list-style: none; margin: 0px;">
 
−
<li>Windows Vista</li>
 
−
<li>Windows 7</li>
 
−
<li>Windows 8.1</li>
 
−
<li>Windows 10</li>
 
−
</ul>
 
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | {{{MS .NET Framework|MS .NET Framework 5.0}}}
 
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 32 and 64 bit
 
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | {{{MS .NET Framework link|[https://dotnet.microsoft.com/en-us/download/dotnet-framework/net462 .NET Framework]}}}
 
−
|}
 
−
 
 
−
Downloaded '''Configurator''' will be in compressed archive. Extract it and launch '''Configurator.exe'''. After launch software language can be changed by clicking [[File:Language_logo.png|25px|link=]] in the right bottom corner:
 
−
 
 
−
[[File:FMB_Configurator_languag.jpg|400px]]
 
−
 
 
−
Configuration process begins by pressing on connected device:
 
−
 
 
−
[[File:{{{cfg_connect|Configurator_connect-FMB150.jpg}}}|400px]]
 
−
 
 
−
After connection to Configurator '''Status window''' will be displayed:
 
−
{{{Status window image|[[Image:{{{model|FMB120}}} Beacon-info-{{{family|FMB1}}} series.png|1000px|none]]}}}
 
−
 
 
−
 
 
−
Various '''[[{{{model|FMB1YX}}}_Status_info|Status window]]''' tabs display information about '''[[{{{model|FMB1YX}}}_Status_info#GNSS_Info|GNSS]], [[{{{model|FMB1YX}}}_Status_info#GSM_Info|GSM]], [[{{{model|FMB1YX}}}_Status_info#I.2FO_Info|I/O]], [[{{{model|FMB1YX}}}_Status_info#Maintenance|Maintenance]]''' and etc. {{{model|FMB1YX}}} has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using '''Save to device''' button. Main buttons offer following functionality:<br/>
 
−
# [[File:Load_from_device.png|25px|link=]] '''Load from device''' – loads configuration from device.
 
−
# [[File:Save_to_device.png|25px|link=]] '''Save to device''' – saves configuration to device.
 
−
# [[File:Load_from_file.png|25px|link=]] '''Load from file''' – loads configuration from file.
 
−
# [[File:Save_to_file.png|25px|link=]] '''Save to file''' – saves configuration to file.
 
−
# {{{Firmware_button| [[File:Firmware_update.png|25px|link=]] '''Update firmware''' – updates firmware on device.}}}
 
−
# [[File:Read_records.png|25px|link=]] '''Read records''' – read records from device.
 
−
# [[File:Reboot_device.png|25px|link=]] '''Reboot device''' – restarts device.
 
−
# [[File:Reset_configuration.png|25px|link=]] '''Reset configuration''' – sets device configuration to default.
 
−
 
 
−
Most important configurator section is GPRS – where all your server and '''[[{{{model|FMB1YX}}}_GPRS_settings|GPRS settings]]''' can be configured and '''[[{{{model|FMB1YX}}}_Data_acquisition_settings|Data Acquisition]]''' – where data acquiring parameters can be configured.
 
−
More details about {{{model|FMB1YX}}} configuration using Configurator can be found '''{{{config_link|in the manual}}}'''.
 
  
 
===Quick SMS configuration===
 
===Quick SMS configuration===
Line 73: Line 28:
 
Quickly set up your device by sending this SMS command to it:
 
Quickly set up your device by sending this SMS command to it:
  
−
  "  setparam <span style="background-color:#91b9d4;">2001</span>:APN;<span style="background-color:#91d4b9;">2002</span>:APN_username;<span style="background-color:#b991d4;">2003</span>:APN_password;<span style="background-color:#b9d491;">2004</span>:Domain;<span style="background-color:#d491b9;">2005</span>:Port;<span style="background-color:#d4b991;">2006</span>:0"
+
  "  setparam <span style="background-color:#91b9d4;">2001</span>:APN;<span style="background-color:#91d4b9;">2002</span>:APN_username;<span style="background-color:#b991d4;">2003</span>:APN_password;<span style="background-color:#b9d491;">2004</span>:Domain;<span style="background-color:#d491b9;">2005</span>:Port;<span style="background-color:#d4b991;">2006</span>;0"
  
 
<div style="column-count:2;-moz-column-count:2;-webkit-column-count:2">
 
<div style="column-count:2;-moz-column-count:2;-webkit-column-count:2">
Line 134: Line 89:
  
 
<br/>
 
<br/>
−
<p>After successful SMS configuration, {{{model|FMB1YX}}} device will '''synchronize time''' and '''update records''' to '''configured server'''. Time intervals and default I/O elements can be changed by using [[Teltonika Configurator]] or {{{SMS/GPRS Commands|[[Template:FMB Device Family Parameter list|SMS parameters]]}}}.</p>
+
<p>After successful SMS configuration, {{{model|FMB1YX}}} device will '''synchronize time''' and '''update records''' to '''configured server'''. Time intervals and default I/O elements can be changed by using [[Teltonika Configurator]] or [[{{{model|FMB1YX}}} Parameter list|SMS parameters]].</p>

Revision as of 09:49, 7 May 2019

PC Connection (Windows)

  1. Power-up TST100 with DC voltage (9 – 50 V) power supply using supplied power cable. LED’s should start blinking, see “LED behaviour description”.
  2. Connect device to computer using Micro-USB cable
  3. You are now ready to use the device on your computer.

How to install USB drivers (Windows)

  1. Please download COM port drivers from Teltonika here.
  2. Extract and run TeltonikaCOMDriver.exe.
  3. Click Next in driver installation window.
  4. In the following window click Install button.
  5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup.

How to install USB drivers (Windows)

  1. Please download COM port drivers from Teltonika here.
  2. Extract and run TeltonikaCOMDriver.exe.
  3. Click Next in driver installation window.
  4. In the following window click Install button.
  5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup.

Quick SMS configuration

Default configuration has optimal parameters present to ensure best performance of track quality and data usage.
Quickly set up your device by sending this SMS command to it: 

"  setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006;0"

GPRS settings:

  • 2001 – APN
  • 2002 – APN username (if there are no APN username, empty field should be left)
  • 2003 – APN password (if there are no APN password, empty field should be left)

Server settings:

  • 2004 – Domain
  • 2005 – Port
  • 2006 – Data sending protocol (0 – TCP, 1 – UDP)

Note: Before SMS text, two space symbols should be inserted.

IOS sms cfg.png
Default configuration settings
Movement and ignition detection:
Accelerometer.png Vehicle movement will be detected by accelerometer Ignition detection-2-2.png Ignition will be detected by vehicle power voltage between 13,2 – 30 V
Device makes a record On Moving if one of these events happen:
300s icon 2.png 300 seconds passes Angle 10 2.png Vehicle turns 10° degrees
Min distance.png Vehicle drives 100 meters Speed delta.png Speed difference between last coordinate and current position is greater than 10 km/h
Device makes a record On Stop if:
1h icon.png 1 hour passes while vehicle is stationary and ignition is off
Records sending to server:
120 s.png If device has made a record it is sent to the server every 120 seconds


After successful SMS configuration, FMB1YX device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator or SMS parameters.

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB_First_start_config&oldid=34486"