Template:FMB1 Without battery: Difference between revisions
Danielekrau (talk | contribs) (Created page with "centre <b>{{{description|GNSS/GSM/Blue-tooth tracker with internal GNSS/GSM antennas}}}</b>{{{pic|400px|right}}}...") |
Danielekrau (talk | contribs) No edit summary |
||
| Line 2: | Line 2: | ||
<b>{{{description|GNSS/GSM/ | <b>{{{description|GNSS/GSM/Bluetooth tracker with internal GNSS/GSM antennas}}}</b>{{{pic|[[Image:Fmb120 man.png|400px|right]]}}} | ||
Latest revision as of 10:08, 9 May 2019
GNSS/GSM/Bluetooth tracker with internal GNSS/GSM antennas
How to insert Micro-SIM card and connect the battery
- Gently remove FMB1YX cover using plastic pry tool from both sides.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
- Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
- After configuration, see “PC Connection (Windows)”, attach device cover back.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
How to insert microSD card
- Push microSD card lock case.
- Open microSD card locker.
- Correctly insert microSD card into slot.
- Close microSD card locker.
- Push microSD card lock case to locked position.
