Difference between revisions of "Template:FMB630 K-Line Data"
| (One intermediate revision by the same user not shown) | |||
| Line 12: | Line 12: | ||
[[Image:kline_tab.png|center]] | [[Image:kline_tab.png|center]] | ||
| − | ===K-Line front panel supported with Firmware version 00.02. | + | ===K-Line front panel supported with Firmware version 00.02.77 or lower=== |
==External links== | ==External links== | ||
https://wiki.teltonika-gps.com/view/FM63_firmware_errata<br /> | https://wiki.teltonika-gps.com/view/FM63_firmware_errata<br /> | ||
https://wiki.teltonika-gps.com/view/FM63XX/FMB630_and_FMB640_and_Tachograph_Solution <br /> | https://wiki.teltonika-gps.com/view/FM63XX/FMB630_and_FMB640_and_Tachograph_Solution <br /> | ||
Revision as of 14:53, 12 July 2019
K-Line Data functionality allows user to monitor and use incoming data from Tachograph via K-line. Kline periodic record timeout parameter is used to set interval between K-Line records. Those records aren't included in standard record and will be sent as separate packet.
To configure any K-Line parameter, every parameter should be separated with comma. For example, configuring first profile Kline Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID do not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.
K-Line front panel supported with Firmware version 00.02.77 or lower
External links
https://wiki.teltonika-gps.com/view/FM63_firmware_errata
https://wiki.teltonika-gps.com/view/FM63XX/FMB630_and_FMB640_and_Tachograph_Solution
