Difference between revisions of "Template:FMM SMS events"

From Wiki Knowledge Base | Teltonika GPS
(Created page with "SMS events functionality allows {{{model|FMB1YX}}} to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.<br/>When any of the I...")
(One intermediate revision by one other user not shown)
Line 4: Line 4:
  
 
The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model|FMB1YX}}} is configured to send an SMS, when {{{txt_switch|Ignition}}} reaches high level while configured with ''High priority'' and event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch|Ignition}}} 1"''
 
The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model|FMB1YX}}} is configured to send an SMS, when {{{txt_switch|Ignition}}} reaches high level while configured with ''High priority'' and event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch|Ignition}}} 1"''
{{{pic_IO|[[Image:FMB IO-{{{model|FMM130}}}.jpg|800px|none]]}}}
+
 
 +
{{{pic_IO|[[Image:FMB IO-FMM125.jpg|800px|none]]}}}
 
The SMS Text field can be altered and any text can be entered. Maximum message length is 160 symbols (numbers, letters and symbols in ASCII, except for comma symbol ",").
 
The SMS Text field can be altered and any text can be entered. Maximum message length is 160 symbols (numbers, letters and symbols in ASCII, except for comma symbol ",").
  

Revision as of 12:59, 20 August 2019

SMS events functionality allows FMB1YX to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.
When any of the I/O elements is triggered, FMB1YX sends a configured SMS message to a defined phone number. If SMS events are activated but there are no numbers defined in GSM Predefined Numbers list (similarly as in the picture below), then the device will not send any messages.

Fmb120 predef numlist.png

The sent SMS messages format is following:
"Date Time Current Coordinate Event Text"
For example, if FMB1YX is configured to send an SMS, when Ignition reaches high level while configured with High priority and event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:
"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 Ignition 1"

FMB IO-FMM125.jpg

The SMS Text field can be altered and any text can be entered. Maximum message length is 160 symbols (numbers, letters and symbols in ASCII, except for comma symbol ",").

Bw nb.png If FMB1YX is in Deep Sleep mode and an SMS event occurs with Low priority (which does not wake up FMB1YX), then the device does not send the message. It is saved to device memory until it wakes up from Deep Sleep mode and GSM modem starts working normally. After it wakes up, all the messages that are saved to memory will be sent, but keep in mind that only 10 messages can be saved to memory – all other messages will not be saved, until there is free memory space.