Difference between revisions of "Template:FMM640 Auto Geofence settings"

From Wiki Knowledge Base | Teltonika GPS
(Created page with "AutoGeofence – the last known position after movement = off. If your car is being taken away – you can be notified. The shape and size of the geofence zones are configurab...")
Line 1: Line 1:
−
{{{pic_autogeofence|[[Image:Fmb640_autogeofence.png|300px|right]]}}}
+
AutoGeofence – the last known position after movement = off. If your car is being taken away – you can be notified. The shape and size of the geofence zones are configurable. There is a possibility to state whether entering in or out of the geofence triggers an asynchronous message. Auto Geofencing option can be configured by following parameters:
  
−
AutoGeofence – the last known position after movement = off. If your car is being taken away – you can be notified. The shape and size of the geofence zones are configurable. There is a possibility to state whether entering in or out of the geofence triggers an asynchronous message.
+
Priority – Priority of generated event, which will be applied to saved record.
−
Auto Geofencing option can be configured by following parameters:
+
Eventual Records - Scenario status will be (or not, if disabled) sent with each AVL
 +
record. Generate Event:
  
−
*Priority – Priority of generated event, which will be applied to saved record.
+
On Entrace – Event generation on Geofence entrance.
−
*Eventual Records - Scenario status will be (or not, if disabled) sent with each AVL
+
On Exit – Event generation on Geofence exit.
 +
On Both - Event generation on Geofence entrance or exit.
 +
Activation Timeout – Time period before Geofence is activated after vehicle stops.
 +
Radius - Radius of circle where in center of it is last coordinates of device when vehicle
 +
engine was running. Deactivate By:
  
−
record.
+
Ignition – if ignition becomes high it will drop AutoGeofenze Zone
−
Generate Event:
+
iButton – if iButton is attached it will drop AutoGeofence Zone
−
 
 
−
*On Entrace – Event generation on Geofence entrance.
 
−
*On Exit – Event generation on Geofence exit.
 
−
*On Both - Event generation on Geofence entrance or exit.
 
−
*Activation Timeout – Time period before Geofence is activated after vehicle stops.
 
−
*Radius - Radius of circle where in center of it is last coordinates of device when vehicle
 
−
 
 
−
engine was running.
 
−
Deactivate By:
 
−
 
 
−
*Ignition – if ignition becomes high it will drop AutoGeofenze Zone
 
−
*iButton – if iButton is attached it will drop AutoGeofence Zone
 
−
*Engine RPM - if engine RPM becomes more than zero it will drop AutoGeofence zone
 

Revision as of 16:00, 22 August 2019

AutoGeofence – the last known position after movement = off. If your car is being taken away – you can be notified. The shape and size of the geofence zones are configurable. There is a possibility to state whether entering in or out of the geofence triggers an asynchronous message. Auto Geofencing option can be configured by following parameters:

Priority – Priority of generated event, which will be applied to saved record. Eventual Records - Scenario status will be (or not, if disabled) sent with each AVL record. Generate Event:

On Entrace – Event generation on Geofence entrance. On Exit – Event generation on Geofence exit. On Both - Event generation on Geofence entrance or exit. Activation Timeout – Time period before Geofence is activated after vehicle stops. Radius - Radius of circle where in center of it is last coordinates of device when vehicle engine was running. Deactivate By:

Ignition – if ignition becomes high it will drop AutoGeofenze Zone iButton – if iButton is attached it will drop AutoGeofence Zone

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMM640_Auto_Geofence_settings&oldid=43327"