Difference between revisions of "Template:FMB64 First start card"

From Wiki Knowledge Base | Teltonika GPS
(16 intermediate revisions by 6 users not shown)
Line 2: Line 2:
  
  
−
<b>{{{description|Leading LTE/GNSS/BLE Terminal for advanced applications}}}</b>
+
<b>{{{description|Leading GNSS/GSM/Bluetooth Terminal for advanced applications}}}</b>
−
{{{pic|[[Image:FMB640_600X600_1.png|400px|right]]}}}
+
{{{pic|[[Image:Fmb640.png|400px|right]]}}}
−
 
 
  
  
Line 10: Line 9:
  
  
−
=='''How to insert SIM card {{{battery|and connect the battery}}}'''==
+
=='''How to insert {{{sim_type|Micro-}}}SIM card'''==
  
−
# '''Unscrew''' 4 screws counterclockwise that are located on the '''bottom''' of the device.
+
# Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.
−
# Remove the '''cover'''.
+
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB640 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is not pointing forward to slot. {{{dual_sim|SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.}}}
−
# Insert '''SIM''' card as shown with '''PIN request disabled''' or read '''[[{{{model|FMB640}}} Security info|Security info]]''' how to enter it later in [[Teltonika Configurator]]. Make sure that SIM card '''cut-off corner''' is pointing outwards. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}}
+
# Attach device '''cover''' and put the '''screws''' from the package into the holes.
−
{{{be_battery|# Connect '''battery''' as shown to device.}}}
+
# '''Screw''' all 4 screws.
−
# After '''configuration''', see “'''[[{{{model|FMB640}}}_First_Start#PC Connection (Windows)|PC Connection (Windows)]]'''”, attach device '''cover''' back.
+
# Device is ready to be connected.
−
# '''Screw''' in all screws. Device is ready to be mounted.
 
  
−
[[Image:{{{sim_insert_pic1|{{{model|Fmb640}}}-cover-1.png}}}|260px]][[Image:{{{sim_insert_pic2|{{{model|Fmb640}}}-cover-2.png}}}|260px]][[Image:{{{sim_insert_pic3|{{{model|Fmb640}}}-cover-3.png}}}|260px]][[Image:{{{sim_insert_pic4|{{{model|Fmb640}}}-cover-4.png}}}|260px]][[Image:{{{sim_insert_pic4|{{{model|Fmb640}}}-cover-5.png}}}|260px]][[Image:{{{sim_insert_pic4|{{{model|Fmb640}}}-cover-6.png}}}|260px]]
+
[[Image:1_fmb640_SIM.png|330px]][[Image:2_fmb640_SIM.png|330px]]
 +
[[Image:3_fmb640_SIM.png|330px]][[Image:4_fmb640_SIM.png|330px]][[Image:FMB640 sim insert-6.png|330px]]
  
  
−
[[File:Alert.png|left|link=]] <br> <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b><br>
+
{|
 +
|-
 +
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
 +
|}
  
−
[[File:SIM_3in1.png|left|230px]] <b>FMX6 devices use Standard size SIM cards for SIM1 and SIM2. Currently most of the SIM cards provided by operators can be disassembled into 3 parts - Standard/Micro/Nano. Depending on the SIM card construction - during device usage in harsh conditions, SIM assembly might come apart which causes instability when connecting to operator.<br>
+
=='''How to insert microSD card'''==
−
To avoid such risk:<br>
 
−
1) If possible - ask operator for Standard SIM card with solid construction (not pre-cut to 3 parts) <br>
 
−
2) Do not use SIM cards that were previously disassembled (SIM was taken apart previously)<br>
 
−
3) If you plan to use only one SIM card - insert it into SIM1 slot (lower slot) - this ensures greater pressure on SIM contacts as the contact bed is pushed by PCB.<br>
 
−
When 2 SIM cards are used simultaneously risk is mitigated as well - when SIM1 is inserted, a greater pressure is applied for SIM2, so SIM parts are harder to come lose </b><br>
 
−
<br>
 
−
<br>
 
−
<br>
 
  
−
=='''How to insert microSD card into {{{model|FMB640}}}'''==
 
−
<br>
 
−
[[File:Micro sd insert V1.2.gif|500px|right]]
 
 
# Push microSD card lock case.
 
# Push microSD card lock case.
 
# Open microSD card locker.
 
# Open microSD card locker.
Line 42: Line 33:
 
# Close microSD card locker.
 
# Close microSD card locker.
 
# Push microSD card lock case to locked position.
 
# Push microSD card lock case to locked position.
−
<br>
+
 
 +
[[Image:Sd_card_1.png|x150px]] [[Image:Sd_card_2.png|x150px]] [[Image:Sd_card_3.png|x150px]] [[Image:Sd_card_4.png|x150px]] [[Image:Sd_card_5.png|x150px]]

Revision as of 09:32, 11 September 2019

Qsg rut950 teltonika.PNG


Leading GNSS/GSM/Bluetooth Terminal for advanced applications

Fmb640.png



How to insert Micro-SIM card

  1. Gently remove FMB1YX cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is not pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
  3. Attach device cover and put the screws from the package into the holes.
  4. Screw all 4 screws.
  5. Device is ready to be connected.

1 fmb640 SIM.png2 fmb640 SIM.png 3 fmb640 SIM.png4 fmb640 SIM.pngFMB640 sim insert-6.png


Alert.png
 Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

How to insert microSD card

  1. Push microSD card lock case.
  2. Open microSD card locker.
  3. Correctly insert microSD card into slot.
  4. Close microSD card locker.
  5. Push microSD card lock case to locked position.

Sd card 1.png Sd card 2.png Sd card 3.png Sd card 4.png Sd card 5.png

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB64_First_start_card&oldid=44540"