Changes

*FM device, which is connected to the CAN adapter (or [[FMB140]]), must be registered in Fota Web – device‘s model, firmware version, serial number and other information must be shown.

*FM device, which is connected to the CAN adapter (or [[FMB140]]), must be registered in Fota Web – device‘s model, firmware version, serial number and other information must be shown.

*A correct firmware version must be uploaded to the FM device. Currently this feature is only supported with firmware version 03.25.11.Rev141. If firmware version is correct, a small, blue, „CAN“ logo will appear next to the device‘s model:

*A correct firmware version must be uploaded to the FM device. Currently this feature is only supported with firmware version 03.25.11.Rev141. If, firmware version is correct, a small, blue, „CAN“ logo will appear next to the device‘s model:

 

[[Image:FM registered.png|799x133px|center]]

[[File:Device registered.jpg|thumb|1160x1160px]]

 

*A current version of the CAN adapter version can be checked by pressing a small „i“ button on the right. All FM device‘s and CAN adapter‘s details are listed in one window:

*A current version of the CAN adapter version can be checked by pressing a small „i“ button on the right. All FM device‘s and CAN adapter‘s details are listed in one window:

 

[[Image:FM OldDate.png|1817x443px|center]]

[[File:+FMB120 + LV-CAN200 Fota details before.jpg|thumb|1163x1163px]]

 

*If the software is not up-to-date it can be updated in the main window. A chech-box neets to be ticked, then „Actions“ button pressed and „Update CAN adapter firmware“ selected:

*If the software is not up-to-date it can be updated in the main window. A chech-box neets to be ticked, then „Actions“ button pressed and „Update CAN adapter firmware“ selected:

 

[[Image:FM SelectedCAN.png|1626x481px|center]]

[[File:+FMB120 + LV-CAN200 Fota details in progress.jpg|thumb|1164x1164px]]

 

*Once the update task has been assigned, it can be seen in the main window:

*Once the update task has been assigned, it can be seen in the main window:

 

[[Image:FM Assigned.png|1629x313px|center]]

[[File:+Assigned.jpg|thumb|1166x1166px]]

 

*When the update is finished, a new software version can be seen in the details window:

*When the update is finished, a new software version can be seen in the details window:

[[File:FMB120-DONE.jpg|thumb|1166x1166px]]

[[Image:FM Done.png|1824x438px|center]]