Difference between revisions of "Template:FMC64 First start card"
From Wiki Knowledge Base | Teltonika GPS
| Line 9: | Line 9: | ||
| − | =='''How to insert {{{sim_type|}}}SIM card'''== | + | =='''How to insert {{{sim_type|Micro-}}}SIM card'''== |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | [[ | + | # Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides. |
| + | # Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB640 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is not pointing forward to slot. {{{dual_sim|SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.}}} | ||
| + | # Attach device '''cover''' and put the '''screws''' from the package into the holes. | ||
| + | # '''Screw''' all 4 screws. | ||
| + | # Device is ready to be connected. | ||
| + | [[Image:1_fmb640_SIM.png|330px]][[Image:2_fmb640_SIM.png|330px]] | ||
| + | [[Image:3_fmb640_SIM.png|330px]][[Image:4_fmb640_SIM.png|330px]][[Image:FMB640 sim insert-6.png|330px]] | ||
Revision as of 15:01, 26 November 2019
Leading GNSS/GSM/Blue-tooth Terminal for advanced applications
How to insert Micro-SIM card
- Gently remove FMB1YX cover using plastic pry tool from both sides.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is not pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
- Attach device cover and put the screws from the package into the holes.
- Screw all 4 screws.
- Device is ready to be connected.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
How to insert microSD card
- Push microSD card lock case.
- Open microSD card locker.
- Correctly insert microSD card into slot.
- Close microSD card locker.
- Push microSD card lock case to locked position.
