Difference between revisions of "FMB010 Beacon List"
m (Protected "FMB010 Beacon List" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
(Created page with "==Beacon Settings== '''Beacon Detection''' 0 (Disabled) – Functionality disabled. 1 (All) – All visible beacons are detected (Max. 100). 2 (Configured) – Only beacon...") |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | ==Beacon Settings== | |
| − | + | '''Beacon Detection''' | |
| − | + | ||
| − | + | 0 (Disabled) – Functionality disabled. | |
| − | [[ | + | |
| + | 1 (All) – All visible beacons are detected (Max. 100). | ||
| + | |||
| + | 2 (Configured) – Only beacons from the list are sent to server | ||
| + | |||
| + | '''Beacon Record''' | ||
| + | |||
| + | 0 (Eventual) – Disabled. (Record is sent after scan procedure is completed). | ||
| + | |||
| + | 1 (Periodic) – All beacons are sent to server. (Record will be saved accordint to configured period). | ||
| + | |||
| + | '''Record Period''' - Beacon record saving period | ||
| + | |||
| + | Record Period on Move & Record Period on Stop. Timers for record generation when device is moving and staying at place. | ||
| + | |||
| + | Record Period on Move (Default value 60 seconds) | ||
| + | |||
| + | Record Period on Stop (Default value 60 seconds) | ||
| + | |||
| + | [[File:Beacon Settings.PNG|Beacon Settings]] | ||
| + | ==Beacon List== | ||
| + | List of authorized beacons. Eddystone and iBeacon protocols are supported*. | ||
| + | |||
| + | [[File:Beacon List.PNG|Beacon List]] | ||
| + | |||
| + | ''*''Beacon Ids can be entered the following way: Namspace:CompanyID, UUID:Major:Minor. Any of the ID parts can be omitted ex., Namespace:. UUID::, UUID::Minotr, etc | ||
Revision as of 15:34, 13 December 2019
Main Page > Fast & Easy Trackers > FMB010 > FMB010 Configuration > FMB010 Beacon ListBeacon Settings
Beacon Detection
0 (Disabled) – Functionality disabled.
1 (All) – All visible beacons are detected (Max. 100).
2 (Configured) – Only beacons from the list are sent to server
Beacon Record
0 (Eventual) – Disabled. (Record is sent after scan procedure is completed).
1 (Periodic) – All beacons are sent to server. (Record will be saved accordint to configured period).
Record Period - Beacon record saving period
Record Period on Move & Record Period on Stop. Timers for record generation when device is moving and staying at place.
Record Period on Move (Default value 60 seconds)
Record Period on Stop (Default value 60 seconds)
Beacon List
List of authorized beacons. Eddystone and iBeacon protocols are supported*.
*Beacon Ids can be entered the following way: Namspace:CompanyID, UUID:Major:Minor. Any of the ID parts can be omitted ex., Namespace:. UUID::, UUID::Minotr, etc
