From Wiki Knowledge Base | Teltonika GPS
|
|
| (6 intermediate revisions by 3 users not shown) |
| Line 1: |
Line 1: |
| − | [[Image:Qsg_rut950_teltonika.PNG|centre]]
| |
| − |
| |
| − |
| |
| − | <b>Teltonika {{{model|FMB208}}} is a SPECIAL waterproof tracker with Bluetooth connectivity and integrated backup battery. Device was designed to meet Indian government regulation AIS 140</b>{{{pic|[[Image:FMB208 00 Demo.png|400px|right]]}}}
| |
| − |
| |
| − |
| |
| − | __TOC__
| |
| − |
| |
| − |
| |
| − | =='''How to insert {{{sim_type|Micro-}}}SIM card and connect the battery'''==
| |
| − |
| |
| − | # '''Unscrew''' 6 screws counterclockwise that are located on the '''bottom''' of the {{{model|FMB208}}} device.
| |
| − | # Remove the '''cover'''.
| |
| − | # Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read '''[[{{{model|FMB208}}} Security info|Security info]]''' how to enter it later in [[Teltonika Configurator]]. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot.
| |
| − | # Connect '''battery''' as shown to device.
| |
| − | # After '''configuration''', see “'''[[{{{model|FMB208}}}_First_Start#PC Connection (Windows)|PC Connection (Windows)]]'''”, attach device '''cover''' back and '''screw''' in all screws.
| |
| − | Device is ready to be mounted.
| |
| − |
| |
| − | [[Image:{{{Unscrew_pic1|FMB208_cover_1.png}}}|220px]][[Image:{{{Remove_the_cover_pic2|FMB208_cover_2.png}}}|220px]][[Image:{{{sim_insert_pic3|FMB208_cover_3.png}}}|220px]][[Image:{{{battery_pic4|FMB208_cover_4.png}}}|220px]][[Image:{{{screw_pic4|FMB208_cover_5.png}}}|220px]]
| |
| − |
| |
| − | {|
| |
| − | |-
| |
| − | | [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
| |
| − | |}
| |
| − |
| |
| | =='''Cable colors'''== | | =='''Cable colors'''== |
| | {| class="wikitable" | | {| class="wikitable" |
Revision as of 18:13, 15 January 2020
Cable colors
| PIN NUMBER
|
PIN NAME
|
DESCRIPTION
|
|
| Red
|
VCC (10-30)V DC (+)
|
Power supply (+10...30 V DC)
|
| Black
|
GND (-)
|
Ground
|
| Yellow
|
DIN 1
|
Digital input, channel 1
|
| White/Green
|
DIN 2
|
Digital input, channel 2
|
| White
|
DOUT 1
|
Digital Output Channel 1
|
| Grey
|
AIN 1/DIN 3
|
Analog input, channel 1. Input range: 0-30 V DC/Digital input channel 3
|
| White/Orange
|
RS232-TX
|
Output for data transmission through RS-232
|
| Violet
|
RS232-RX
|
Input for data reception through RS-232
|
| Green
|
AIN 2/DIN 4
|
Analog input, channel 2. Input range: 0-30 V DC/Digital input channel 4
|
| Blue
|
DOUT 2
|
Digital output 2
|
