Changes

Note: moving forward along any axis will generate negative values. This means acceleration will generate -X values, accordingly breaking will generate X values. Same goes for other axes. <br>

Note: moving forward along any axis will generate negative values. This means acceleration will generate -X values, accordingly breaking will generate X values. Same goes for other axes. <br>

Configurable parameters can be found at [[FMB120_System_settings#Accelerometer_Auto_Calibration|System Settings Accelerometer Auto Calibration ]]

Configurable parameters can be found at [[FMB120_System_settings#Accelerometer_Auto_Calibration|System Settings Accelerometer Auto Calibration]]

Commands that can be used during calibration:<br>

Commands that can be used during calibration:<br>

* '''Advanced''' - unplug detection according to '''external votage''' and '''accelerometer'''. Is used in cars where power voltage is disconnected when ignition is switched off.}}}

* '''Advanced''' - unplug detection according to '''external votage''' and '''accelerometer'''. Is used in cars where power voltage is disconnected when ignition is switched off.}}}

==Towing Detection==

==Towing Detection==

 

[[File:Towing Detection.png|alt=|right]]

[[Image:Fmb120_towing.png|right]]

 

''Towing Detection'' feature helps to inform the driver about unexpected car movement when it was parked. {{{model|FMB1YX}}} generates an event when car is being towed or lifted, for example, in a case of vehicle evacuation. {{{model|FMB1YX}}} activates towing function when following conditions are met:

''Towing Detection'' feature helps to inform the driver about unexpected car movement when it was parked. {{{model|FMB1YX}}} generates an event when car is being towed or lifted, for example, in a case of vehicle evacuation. {{{model|FMB1YX}}} activates towing function when following conditions are met:

When towing function is engaged {{{model|FMB1YX}}} monitors accelerometer data. If acceleration ''Threshold'' or ''Angle'' reach configured values for a configured ''Duration'', and Ignition is still OFF for a period of time that is longer than ''Event Timeout'', then an event is generated. When configured, ''Make Call To'' and ''Send SMS To'' functions make a call or send an SMS to a predefined phone number. Towing function will be reactivated after {{{model|FMB1YX}}} detects a change of Ignition state from ON to OFF or if the confgured ''Activation Timeout'' is reached again.

When towing function is engaged {{{model|FMB1YX}}} monitors accelerometer data. If acceleration ''Threshold'' or ''Angle'' reach configured values for a configured ''Duration'', and Ignition is still OFF for a period of time that is longer than ''Event Timeout'', then an event is generated. When configured, ''Make Call To'' and ''Send SMS To'' functions make a call or send an SMS to a predefined phone number. Towing function will be reactivated after {{{model|FMB1YX}}} detects a change of Ignition state from ON to OFF or if the confgured ''Activation Timeout'' is reached again.

<br><br><br><br><br><br><br>

<br>Digital output 1 or digital output 2 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT controls]].<br><br><br><br><br>

 

<br />

==Crash Detection==

==Crash Detection==