Changes

<br />''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise it will be appended only to eventual records.<br /><br />Note that this scenario will not work with Deep Sleep, Ultra Deep Sleep and Online Deep Sleep modes, since they disable the device'sGSM module to save power.<br /><br /><br /><br /><br /><br /><br /><br /><br />

<br />''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise it will be appended only to eventual records.<br /><br />Note that this scenario will not work with Deep Sleep, Ultra Deep Sleep and Online Deep Sleep modes, since they disable the device'sGSM module to save power.<br /><br /><br /><br /><br /><br /><br /><br /><br />

==DOUT Control Via Call==

 

 

==   DOUT Control Via Call ==

<span></span><span></span>

<span></span><span></span>

[[File:FMB1YX_DOUT_Control_Via_Call.png|right|size]]

[[File:FMB1YX_DOUT_Control_Via_Call.png|right|size]]

<span></span>

<span></span>

* When FMB1YX is configured to control DOUT1/DOUT2 the device waits for an incoming call from a configured secure number. If a call is received FMB1YX turns on DOUT1/DOUT2 for a user defined ''Duration Timeout''. If duration timeout set to "0" DOUT1/DOUT2 will be OFF.

*When FMB1YX is configured to control DOUT1/DOUT2 the device waits for an incoming call from a configured secure number. If a call is received FMB1YX turns on DOUT1/DOUT2 for a user defined ''Duration Timeout''. If duration timeout set to "0" DOUT1/DOUT2 will be OFF.

* DOUT1/DOUT2 can be turned off by ''Duration Timeout'' or by digital input 1, digital input 2 or digital input 3.

*DOUT1/DOUT2 can be turned off by ''Duration Timeout'' or by digital input 1, digital input 2 or digital input 3.

* DOUT1/DOUT2 will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to maximum value (2147483647) which is about 68 years.

*DOUT1/DOUT2 will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to maximum value (2147483647) which is about 68 years.

<span></span>

<span></span>

<br />

<br />

== Immobilizer ==

==Immobilizer==

<span></span>

<span></span>

[[File:FMB1YX_Immobilizer.png|right|size]]

[[File:FMB1YX_Immobilizer.png|right|size]]

Ignition off timeout parameter is used to set the duration after which authorization is activated, when ignition is turned off. For example, if Ignition off timeout is set to 30 seconds, when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.

Ignition off timeout parameter is used to set the duration after which authorization is activated, when ignition is turned off. For example, if Ignition off timeout is set to 30 seconds, when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.

== iButton Read Notification ==

==iButton Read Notification==

<span></span>

<span></span>

[[File:FMB1YX_iButton_Read_Notification.png|right|size]]

[[File:FMB1YX_iButton_Read_Notification.png|right|size]]