Difference between revisions of "Template:FMB96X First start card"

From Wiki Knowledge Base | Teltonika GPS
 
(No difference)

Latest revision as of 15:08, 30 March 2020

Qsg rut950 teltonika.PNG


Special and smart tracker with wide power supply range and high capacity internal Ni-MH battery

FMB962 main.png





How to insert Micro-SIM card

  1. Gently remove FMB96X cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Attach device cover back.
  4. Device is ready to be connected.


  1. Gently remove FMB96X cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.
  4. Attach device cover back. Device is ready to be connected.


FMB964 SIM Battery 1.pngFMB964 sim battery insert 2.pngFMB964 sim battery insert 3.pngFMB964 sim battery insert 4.png


Alert.png
 Note: Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB96X_First_start_card&oldid=55957"