Template:FMB1 First start card: Difference between revisions

VisualWikitext

Latest revision as of 17:50, 10 April 2020

GNSS/GSM/Bluetooth tracker with internal GNSS/GSM antennas

How to insert Micro-SIM card and connect the battery

Gently remove FMB1YX cover using plastic pry tool from both sides.
Note: To properly open a new case please watch this video.
Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
After configuration, see “PC Connection (Windows)”, attach device cover back.

Device is ready to be installed.

Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

@@ Line 1: / Line 1: @@
 [[Image:Qsg_rut950_teltonika.PNG|centre]]
-<b><font size="+10">{{{model|FMB1YX}}} GNSS/GSM/Bluetooth tracker with {{{antenna|GNSS/GSM antennas}}} and internal battery</font></b>
-<font size="+3">Quick Start Guide</font> {{{pic|[[Image:Fmb120 man.png|600px|right]]}}}
+<b>{{{description|GNSS/GSM/Bluetooth tracker with internal GNSS/GSM antennas}}}</b>{{{pic|[[Image:Fmb120 man.png|400px|right]]}}}
+__TOC__
+=='''How to insert {{{sim_type|Micro-}}}SIM card {{{battery|and connect the battery}}}'''==
+# Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.{{{properly_open|<p><b>Note:</b> To properly open a new case please watch this [https://youtu.be/PBXVNXfRjg0 video].</p>}}}
+# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read '''[[{{{model|FMB1YX}}} Security info|Security info]]''' how to enter it later in [[Teltonika Configurator]]. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}}
+{{{be_battery|# Connect '''battery''' as shown to device. Position the battery in place where it does not obstruct other components.
+# After '''configuration''', see “'''[[{{{model|FMB1YX}}}_First_Start#PC Connection (Windows)|PC Connection (Windows)]]'''”, attach device '''cover''' back.}}}
+Device is ready to be installed.
+[[Image:{{{sim_insert_pic1|FMB1_cover1_correct.png}}}|260px]][[Image:{{{sim_insert_pic2|FMB1_cover2_correct.png}}}|260px]][[Image:{{{sim_insert_pic3|FMB1_cover3_correct.png}}}|260px]][[Image:{{{sim_insert_pic4|FMB1_cover4_correct.png}}}|260px]]
+{|
+|-
+| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
+|}
-<font size="+3"><span style=color:#104996>'''How to insert micro SIM card into {{{model|FMB1YX}}}'''</span></font>
-<font size="+2"><span style=color:#F49E21> 1. </span> Remove {{{model|FMB1YX}}} cover. </font>
-<font size="+2"><span style=color:#F49E21> 2. </span> Insert SIM card as shown. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one. </font>
-<font size="+2"><span style=color:#F49E21> 3. </span> Attach cover. </font>
-<font size="+2"><span style=color:#F49E21> 4. </span> Device is ready to be connected. </font>
-[[Image:Fmb120_cover_1.png|600px|left]] [[Image:Fmb120_cover_3.png|600px]]
-[[Image:Fmb120_cover_2.png|600px|left]] [[Image:Fmb120_cover_4.png|600px]]
-<font size="+3"><span style=color:#104996>'''How to insert SD card into {{{model|FMB1YX}}}'''</span></font>
-<font size="+2"><span style=color:#F49E21> 1. </span> Push microSD card lock case. </font>
-<font size="+2"><span style=color:#F49E21> 2. </span> Open microSD card locker. </font>
-<font size="+2"><span style=color:#F49E21> 3. </span> Correctly insert microSD card into slot. </font>
-<font size="+2"><span style=color:#F49E21> 4. </span> Close microSD card locker. </font>
-<font size="+2"><span style=color:#F49E21> 5. </span> Push microSD card lock case to locked position. </font>
-[[Image:Sd_card_1.png]] [[Image:Sd_card_2.png]] [[Image:Sd_card_3.png]] [[Image:Sd_card_4.png]] [[Image:Sd_card_5.png]]