3,248
edits
Changes
→Alternative DDD download
* FMB640 CAN1 connected to vehicle's FMS(J1939) BUS line<br>
* FMB640 CAN1 connected to vehicle's FMS(J1939) BUS line<br>
* FMB640 CAN2 connected to vehicle's Tachograph <br> - Instructions can be found on [[FMB640_and_Tachograph_Solution|FMB640 and Tachograph Solution]] wiki page;
* FMB640 CAN2 connected to vehicle's Tachograph - Instructions can be found on [[FMB640_and_Tachograph_Solution|FMB640 and Tachograph Solution]] wiki page;
==Tachograph Settings==
==Tachograph Settings==
Tachograph ignition source – which DIN is connected to vehicle ignition ("Ignition" parameter - tachograph ignition source will be the same as configured in "System" -> "Ignition Source");<br />
Tachograph ignition source – which DIN is connected to vehicle ignition ("Ignition" parameter - tachograph ignition source will be the same as configured in "System" -> "Ignition Source");<br />
<br />
<br />
[[image:FMB640_Tachograph_settings2.gif]]
FMB640 can be wired to Tachograph using instructions provided in [[FMB640_and_Tachograph_Solution|FMB640 and Tachograph Solution]] wiki page.
FMB640 can be wired to Tachograph using instructions provided in [[FMB640_and_Tachograph_Solution|FMB640 and Tachograph Solution]] wiki page.
'''Alternative DDD download'''
Enables the possibility to download specific DDD driver and co-driver card data from non-original locations. It may include last download information.
NOTE: Alternative DDD download '''WILL NOT''' work with GEN2 Tachographs (VDO 4.0 or Stoneridge SE5000 8.0)
By default, this parameter is DISABLED.
==WEB Tacho Settings==
==WEB Tacho Settings==
[[image:FMB640_FMS_settings.gif]]
[[image:FMB640_FMS_settings.gif]]
[[Category:FMB640 Configuration]]