Changes

no edit summary
Line 3: Line 3:       −
'''Step 2:''' Select TCP or UDP depending on the configuration done on the device and add the port opened on router. Select “Listen” after adding the port.
+
'''Step 2:''' In “Automatic-vehicle-location-representer”  select TCP or UDP depending on the configuration done on the device and add the port opened on router. Select “Listen” after adding the port.
 +
 
 +
'''Step 3:''' Once button “Listen” is selected, the device starts pushing the data to the Listener. All data also saved in text documentation.
 +
[[File:Image2.png|none|thumb]]
 +
'''Step 4:''' Once you receive data from device you can push "Stop" button, after that copy data that you need to decode and go to Parser.
 +
[[File:Image3.png|none|thumb]]
 +
'''Step 5:''' Paste your data in "First window" after that select which data protocol you used to get this data and after that push "parse" button. You will receive decode data.
 +
[[File:Image4.png|none|thumb]]

Navigation menu