Changes

==Solution==

==Solution==

After installation is completed and CAN bus adapter program is set, please, follow these steps:

After installation is completed and CAN bus adapter program is set, please, follow these steps:

#Do a learning procedure - using the vehicle key, unlock and lock vehicle '''three''' '''times''';

#You will need to do a learning procedure - using the vehicle key, unlock and lock vehicle '''three''' '''times''', but now continue to Step 2;

#Send GPRS command - "  lvcansetprog 11120" (or any other). Program number must contain 5 digits.

#Send GPRS command - "  lvcansetprog 11120" (or any other). Program number must contain 5 digits.

#Send GPRS command - "  lvcansetprog ''the one that is for Your vehicle model''". Program number can be seen in at the top of the CAN adapter connection scheme.

#Send GPRS command - "  lvcansetprog ''the one that is for Your vehicle model''". Program number can be seen in at the top of the CAN adapter connection scheme.

#After receiving a response to a command, repeat the learning procedure (first step).

#After receiving a response to a command, do the learning procedure in Step 1.

{|

{|

|-

|-

|[[File:Alert.png|left|link=]]||<b>'''Note''': if installing CAN-CONTROL adapter into different vehicle - program should be changed according to the vehicle model and learning must be initiated ("first solution step"). If adapter will be installed again on the previous vehicle - program number needs to be restored and learning step must be repeated. </b>

|[[File:Alert.png|left|link=]]||<b>'''Note''': if installing CAN-CONTROL adapter into different vehicle - program should be changed according to the vehicle model and learning must be initiated ("first solution step"). If adapter will be installed again on the previous vehicle - program number needs to be restored and learning step must be repeated. </b>

|}

|}