Line 1: |
Line 1: |
− | SAE J1708 is a standard used for serial communications between ECUs on a heavy-duty. The hardware utilized is RS-485 transceivers wired for open collector operation through the use of a pullup and pulldown of the separate data lines.
| + | __TOC__ |
| | | |
− | With {{{model|FMX640}}}, J1708 functionality is used to read vehicle's Fuel Level and Fuel consumption.
| + | ==Description== |
| + | SAE J1708 is a standard used for serial communications between ECUs on heavy-duty. The hardware utilized is RS-485 transceivers wired for open collector operation through the use of a pullup and pulldown of the separate data lines. |
| | | |
− | Because J1708 is not a CAN-BUS protocol, {{{model|FMX640}}} CAN1 and CAN2 lines cannot be used to read J1708 information. {{{model|FMX640}}} has a special J1708 Port, which utilizes an RJ9 4P4C connector. | + | With [[{{{model|FMX640}}}]], J1708 functionality is used to read vehicle's Fuel Level and Fuel consumption. |
| + | |
| + | Because J1708 is not a CAN-BUS protocol, [[{{{model|FMX640}}}]] CAN1 and CAN2 lines cannot be used to read J1708 information. [[{{{model|FMX640}}}]] has a special J1708 Port, which utilizes an RJ9 4P4C connector. |
| | | |
| [[Image:FMX640_and_J1708_illustration_v1.2.png]] <br> | | [[Image:FMX640_and_J1708_illustration_v1.2.png]] <br> |
| | | |
− | ==Software Configuration of {{{model|FMX640}}}with J1708== | + | ==Software Configuration of {{{model|FMX640}}} with J1708== |
| | | |
− | {{{FMB640CFG|Firmware version: 00.00.11 or above | + | {{{FMB640CFG|'''Firmware version:''' 00.00.11 or above </br> |
− | Configurator version: 0.13.35.29297 or above | + | '''Configurator version:''' 0.13.35.29297 or above |
| }}} | | }}} |
− | J1708 configuration is done in the FMS IO Tab. | + | J1708 configuration is done in the [[{{{model|FMX640}}}_LVCAN_I/O,FMS_IO_and_Tachograph_data_elements|FMS IO]] Tab. |
| | | |
| [[image:J1708_config.gif]] | | [[image:J1708_config.gif]] |
| | | |
− | When J1708 is enabled as Fuel Level source, Fuel related data will be taken from the J1708 line, FMS Fuel data will be ignored. | + | When J1708 is enabled as a Fuel Level source, Fuel-related data will be taken from the J1708 line, FMS Fuel data will be ignored. |
| | | |
| ==Connection with Vehicle port== | | ==Connection with Vehicle port== |
Line 22: |
Line 25: |
| J1708 connector is not supported by all vehicles. Only VOLVO, RENAULT, and American truck manufacturers implement the J1708 connector. | | J1708 connector is not supported by all vehicles. Only VOLVO, RENAULT, and American truck manufacturers implement the J1708 connector. |
| | | |
− | Trucks utilize Deutsch 6-PIN or Deutsch 9-PIN connector, which is used to connect {{{model|FMX640}}} to J1708. | + | Trucks utilize ''Deutsch 6-PIN or Deutsch 9-PIN connector'', which are used to connect {{{model|FMX640}}} to J1708. |
| | | |
| [[Image:FMX640 and 6PIN J1708 connection scheme v1.2.png|575px]] [[Image:FMX640 and 9PIN J1939 connection scheme v1.1.png|575px]] | | [[Image:FMX640 and 6PIN J1708 connection scheme v1.2.png|575px]] [[Image:FMX640 and 9PIN J1939 connection scheme v1.1.png|575px]] |