Template:FMB1 First start card withoutSD: Difference between revisions

Latest revision as of 09:56, 19 January 2022

GNSS/GSM/Blue-tooth tracker with internal GNSS/GSM antennas

How to insert Micro-SIM card

Gently remove FMX2YX cover using plastic pry tool from both sides.
Disassemble the device, remove both sides from the PCB
Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
Connect the battery
Place the battery in the housing
Attach device cover back.

Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

@@ Line 1: / Line 1: @@
 [[Image:Qsg_rut950_teltonika.PNG|centre]]
 <b>{{{description|GNSS/GSM/Blue-tooth tracker with internal GNSS/GSM antennas}}}</b>{{{pic|[[Image:Fmb120 man.png|400px|right]]}}}
@@ Line 10: / Line 12: @@
 =='''How to insert {{{sim_type|Micro-}}}SIM card'''==
-# Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.
+#Gently remove {{{model|FMX2YX}}} '''cover''' using '''plastic pry tool''' from both sides.
-# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB120 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}}
+#Disassemble the device, remove both sides from the PCB
-# Attach device '''cover''' back.
+#Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB120 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}}
-# Device is ready to be connected.
+#Connect the battery
+#Place the battery in the housing
+#Attach device '''cover''' back.
+[[Image:FMX2YX_cover_open1_correct.png|280px]][[Image:FMX2YX_cover2_correct.png|280px]][[Image:FMX2YX_cover3_correct.png|280px]][[Image:FMX2YX_cover4_correct.png|280px]][[Image:FMX2YX_cover5_correct.png|middle|280px]][[Image:FMX2YX_cover6_correct.png|middle|280px]]
-[[Image:Fmb120_cover_1.png|280px]][[Image:Fmb120_cover_2.png|280px]][[Image:Fmb120_cover_3.png|280px]][[Image:Fmb120_cover_4.png|280px]]
+{|
+|-
+| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
+|}