FMB225 LED status: Difference between revisions
Created page with "{{Template:FMB1 LED status|model=FMB225 |CAN_status= }} 2" |
m Protected "FMB225 LED status" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)) |
(No difference)
| |
Latest revision as of 10:37, 28 January 2022
Main Page > Professional Trackers > FMB225 > FMB225 Manual > FMB225 LED statusThis section is an explanation of LED indications on an FMB225 device.
| Behaviour | Meaning |
|---|---|
| Permanently switched on | GNSS signal is not received |
| Blinking every second | Normal mode, GNSS is working |
| Off | GNSS is turned off because: Device is not working or Device is in sleep mode |
| Blinking fast constantly | Device firmware is being flashed |
Status LED Indications
| Behaviour | Meaning |
|---|---|
| Blinking every second | Normal mode |
| Blinking every two seconds | Sleep mode |
| Blinking fast for a short time | Modem activity |
| Off | Device is not working or Device is in boot mode |