Difference between revisions of "Template:FMB Auto Geofence settings"

From Wiki Knowledge Base | Teltonika GPS
m
m
(14 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
{{{pic_autogeofence|[[Image:Fmb120_autogeofence.png|300px|right]]}}}
+
[[Image:Fmb120_autogeofence.png|300px|right]]
  
−
''AutoGeofence'' is based on the last known position after the movement has stopped. You can be notified using this function if your car is taken away. The shape and size of Geofence zones are set by parameters. It is possible to state whether entering or leaving the geofence triggers an asynchronous message.
+
AutoGeofence – the last known position after movement = off. If your car’s being taken away – you can be notified. The shape and size of the geofence zones are parameters. It is possibility to state whether entering in or out of the geofence triggers an asynchronous message.
−
AutoGeofencing options can be configured by following parameters as depicted in the right hand side figure:<br/>Activation timeout defines the delay between the creation of AutoGeofence within set ''Radius'' value around vehicle's most recent position and when the ignition is off. {{{txt_settings|}}} Note that AutoGeofencing does not require entering coordinates, instead it requires GPS visibility. Event generation can take place on Geofence <span style=color:#F6A83E>Entrance</span>, <span style=color:#F6A83E>Exit</span> or <span style=color:#F6A83E>On Both</span>. ''Eventual Records'' is used to enable or disable ''Eventual Records'' functionality. {{{deact_auto|AutoGeofence can be deactivated by:}}}
+
AutoGeofencing option can be configured by following parameters visible in the right hand side figure.<br/>Activation Timeout (s) – when ignition is turned off and activation timeout passes, as AutoGeofence will be created around vehicle last position with set radius value.
−
{{{text_din|* <span style=color:#F6A83E>Digital Input 1</span> – If DIN1 voltage becomes equal or higher than 6.9 V.
+
Radius (m) – radius of circle with center device coordinates after activating AutoGeofence feature.<br/>Deactivate By:
−
* <span style=color:#F6A83E>Digital Input 2</span> – If DIN2 voltage becomes equal or higher than 2.1 V.
+
* Digital Input 1 – If DIN1 voltage becomes equal or higher than 6,9 V it will disable AutoGeofenze Zone.
−
* <span style=color:#F6A83E>Digital Input 3</span> – If DIN3 voltage becomes equal or higher than 3.5 V.
+
* Digital Input 2 – If DIN2 voltage becomes equal or higher than 2,1 V it will disable AutoGeofenze Zone.
−
* <span style=color:#F6A83E>iButton</span> – If authorized iButton is attached.
+
* Digital Input 3 – If DIN3 voltage becomes equal or higher than 3,5 V it will disable AutoGeofenze Zone.
−
* <span style=color:#F6A83E>Power Voltage</span> – If power voltage becomes higher than low voltage level (defined in Ignition settings).
+
* iButton – if authorized iButton is attached.
−
* <span style=color:#F6A83E>Engine RPM</span> – If engine RPM value becomes higher than 0.}}}
+
* Power Voltage – if power voltage become higher that low voltage level (Ignition settings) it will disable AutoGeofenze Zone.
 +
* Engine RPM – If engine RPM became higher that 0 it will disable AutoGeofence Zone.<br/>
 +
Feature – Priority of generated event, which will be applied to saved record.<br/>Enter Event – Event generation on Geofence entrance.<br/>Exit Event – Event generation on Geofence exit.<br/>On Both - Event generation on Geofence entrance or exit.<br/>Eventual Records – Enable or Disable Eventual Records functionality.<br/>Note that AutoGeofencing does not require entering coordinates, instead it requires GPS visibility. If vehicle stopped and activation timeout has passed, an AutoGeofence will be created around vehicle’s last position with set Radius value.

Revision as of 15:04, 11 April 2018

Fmb120 autogeofence.png

AutoGeofence – the last known position after movement = off. If your car’s being taken away – you can be notified. The shape and size of the geofence zones are parameters. It is possibility to state whether entering in or out of the geofence triggers an asynchronous message. AutoGeofencing option can be configured by following parameters visible in the right hand side figure.
Activation Timeout (s) – when ignition is turned off and activation timeout passes, as AutoGeofence will be created around vehicle last position with set radius value. Radius (m) – radius of circle with center device coordinates after activating AutoGeofence feature.
Deactivate By:

  • Digital Input 1 – If DIN1 voltage becomes equal or higher than 6,9 V it will disable AutoGeofenze Zone.
  • Digital Input 2 – If DIN2 voltage becomes equal or higher than 2,1 V it will disable AutoGeofenze Zone.
  • Digital Input 3 – If DIN3 voltage becomes equal or higher than 3,5 V it will disable AutoGeofenze Zone.
  • iButton – if authorized iButton is attached.
  • Power Voltage – if power voltage become higher that low voltage level (Ignition settings) it will disable AutoGeofenze Zone.
  • Engine RPM – If engine RPM became higher that 0 it will disable AutoGeofence Zone.

Feature – Priority of generated event, which will be applied to saved record.
Enter Event – Event generation on Geofence entrance.
Exit Event – Event generation on Geofence exit.
On Both - Event generation on Geofence entrance or exit.
Eventual Records – Enable or Disable Eventual Records functionality.
Note that AutoGeofencing does not require entering coordinates, instead it requires GPS visibility. If vehicle stopped and activation timeout has passed, an AutoGeofence will be created around vehicle’s last position with set Radius value.

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB_Auto_Geofence_settings&oldid=7220"