Difference between revisions of "Template:FMX13A First start card withoutSD"

From Wiki Knowledge Base | Teltonika GPS
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
−
=='''How to insert {{{sim_type|Micro-}}}SIM card {{{battery|and connect the battery}}}'''==
+
=='''How to insert {{{sim_type|Micro-}}}SIM card'''==
  
−
# Gently remove {{{model|FMM125}}} '''cover''' using '''plastic pry tool''' from both sides.<p><b>Note:</b> To properly open a new case please watch this [https://youtu.be/PBXVNXfRjg0 video].</p>
+
#Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.
−
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read '''[[{{{model|FMM125}}} Security info|Security info]]''' how to enter it later in [[Teltonika Configurator]]. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot.
+
#Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB120 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}}
−
{{{be_battery|# Connect '''battery''' as shown to device. Position the battery in place where it does not obstruct other components.
+
#Attach device '''cover''' back.
−
# After '''configuration''', see “'''[[{{{model|FMM125}}}_First_Start#PC Connection (Windows)|PC Connection (Windows)]]'''”, attach device '''cover''' back.}}}
+
#Device is ready to be connected.
  
 
[[Image:FMC13A_cover1_correct.png|280px]][[Image:FMC13A_cover2_correct.png|280px]][[Image:FMC13A_cover3_correct.png|280px]][[Image:FMC13A_cover4_correct.png|280px]]
 
[[Image:FMC13A_cover1_correct.png|280px]][[Image:FMC13A_cover2_correct.png|280px]][[Image:FMC13A_cover3_correct.png|280px]][[Image:FMC13A_cover4_correct.png|280px]]

Revision as of 12:27, 25 April 2022

How to insert Micro-SIM card

  1. Gently remove FMB1YX cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
  3. Attach device cover back.
  4. Device is ready to be connected.

FMC13A cover1 correct.pngFMC13A cover2 correct.pngFMC13A cover3 correct.pngFMC13A cover4 correct.png

Alert.png
 Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMX13A_First_start_card_withoutSD&oldid=72490"