Changes

m
no edit summary
Line 1: Line 1:  
System settings have 9 configurable parameters:
 
System settings have 9 configurable parameters:
 
* Sleep settings, where user can choose sleep mode;
 
* Sleep settings, where user can choose sleep mode;
* Ignition source, where user can choose between power voltage, digital input 1, accelerometer and engine RPM as ignition sources. More than one ignition source can be selected at the same moment. User can select movement start and movement stop delay time (in seconds): those parameters are used when ignition source is accelerometer. Into ignition status take the following functionalities: power manager, eco driving, excessive idling, fuel consumption, over speeding, towing and trip functionalities.
+
* Ignition source, where user can choose between power voltage, digital input 1, accelerometer and engine RPM as ignition sources. More than one ignition source can be selected at the same moment. User can select movement start and movement stop delay time (in seconds): those parameters are used when accelerometer is selected as ignition source. Ignition status is governed by the following functionalities: power manager, eco driving, excessive idling, fuel consumption, over speeding, towing and trip functionalities.
* Object Motion Detection Settings, where user can configure 4 ways how FMB120 will detect stopped movement, and change its working mode (for working modes, read section 5.8). Other functionalities that depend from movement source: power manager, fuel consumption and trip.
+
* Object Motion Detection Settings, where user can configure 4 ways how FMB120 will detect stopped movement, and change its working mode (for working modes, read section [[FMB120 Data acquisition settings|Data acquisition settings]]). Other functionalities that depend from movement source: power manager, fuel consumption and trip.
 
* Static navigation settings, where user can turn static navigation on or off. Additional, user can chose from what source (movement or ignition) static navigation can be deactivated/activated;
 
* Static navigation settings, where user can turn static navigation on or off. Additional, user can chose from what source (movement or ignition) static navigation can be deactivated/activated;
 
* Records Settings, where user can enable or disable records when GPS is not available (no time synchronization);
 
* Records Settings, where user can enable or disable records when GPS is not available (no time synchronization);

Navigation menu