Line 1: |
Line 1: |
− | =='''How to insert {{{sim_type|Micro-}}}SIM card'''== | + | =='''How to insert {{{sim_type|Micro-}}}SIM card {{{battery|and connect the battery}}}'''== |
| | | |
− | #Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides. | + | # Gently remove {{{model|FMM125}}} '''cover''' using '''plastic pry tool''' from both sides.<p><b>Note:</b> To properly open a new case please watch this [https://youtu.be/PBXVNXfRjg0 video].</p> |
− | #Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB120 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}} | + | # Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read '''[[{{{model|FMM125}}} Security info|Security info]]''' how to enter it later in [[Teltonika Configurator]]. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. |
− | #Attach device '''cover''' back. | + | {{{be_battery|# Connect '''battery''' as shown to device. Position the battery in place where it does not obstruct other components. |
− | #Device is ready to be connected.
| + | # After '''configuration''', see “'''[[{{{model|FMM125}}}_First_Start#PC Connection (Windows)|PC Connection (Windows)]]'''”, attach device '''cover''' back.}}} |
| | | |
| [[Image:FMC13A_cover1_correct.png|280px]][[Image:FMC13A_cover2_correct.png|280px]][[Image:FMC13A_cover3_correct.png|280px]][[Image:FMC13A_cover4_correct.png|280px]] | | [[Image:FMC13A_cover1_correct.png|280px]][[Image:FMC13A_cover2_correct.png|280px]][[Image:FMC13A_cover3_correct.png|280px]][[Image:FMC13A_cover4_correct.png|280px]] |
Line 10: |
Line 10: |
| {| | | {| |
| |- | | |- |
− | | [[File:Alert_morey.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b> | + | | [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b> |
| |} | | |} |