Difference between revisions of "Template:FMB Sleep modes"

From Wiki Knowledge Base | Teltonika GPS
(Added CAN and OBD behaviour for Deep Sleep and Online Deep Sleep under the condition that the page has variable CAN set.)
(90 intermediate revisions by 20 users not shown)
Line 1: Line 1:
−
{{{txt_sleepmodes|There are four sleep modes: GPS sleep, Deep sleep, Online Deep sleep, and Ultra Deep-sleep mode.}}}
+
There are three sleep modes: GPS sleep, Deep sleep and Online sleep mode.
−
==Video Demonstration==
+
 
−
Here is a visual demonstration of the sleep modes and how they they affect the device.
 
−
<br /><br /><youtube>7UqbP_RTM0w</youtube><br />
 
 
==GPS Sleep mode==
 
==GPS Sleep mode==
 +
FMB120 is able to go to GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, device goes to sleep mode. While in GPS sleep mode, FMB120 turns GPS module off and is still making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>FMB120 will enter GPS sleep mode if ALL of these conditions are met:
 +
* FMB120 has to be configured to work in GPS Sleep mode and sleep timeout is reached;
 +
* Device must have time synchronized with GNSS satellites and have GPS fix;
 +
* No movement by configured movement source or movement sensor is detected;
 +
* Ignition (configured ignition source) is off;
 +
* Forced wakeup is not set;
 +
* Have no SMS to read.
  
−
 
+
FMB120 exits GPS sleep mode if ONE of following conditions is true:
−
{{{model|FMM6YX}}} is able to go into GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when the device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, the device goes into sleep mode.
+
* Movement by movement source or movement sensor is detected;
−
 
+
* Ignition (configured ignition source) is turned on.
−
[[Image:GPS_Sleep_.gif]]
 
−
 
 
−
When in GPS sleep mode, {{{model|FMM6YX}}} turns the GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>{{{model|FMM6YX}}} will enter GPS sleep mode if ALL of these conditions are met:
 
−
 
 
−
*{{{model|FMM6YX}}} is configured to work in GPS Sleep mode and sleep timeout is reached;
 
−
*Device time must be synchronized with GPS satellites. From Firmware 03.18.15 version, this condition depends on the “Records saving/sending without TS” parameter:
 
−
 
 
−
:*After Position Fix - {{{model|FMM6YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;
 
−
:*After Time Sync - {{{model|FMM6YX}}} time is synchronized over NTP, NITZ, or GNSS satellites;
 
−
:*Always - {{{model|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.
 
−
 
 
−
*Movement is not detected by the accelerometer{{{txt_movement| and configured movement source}}};
 
−
{{{txt_ignition|* Ignition (configured ignition source) is off;}}}
 
−
 
 
−
*There are no SMS messages being received.
 
−
 
 
−
{| class="wikitable" style="border-style: solid; border-width: 0px"
 
−
|+
 
−
|-
 
−
| style="text-align: left; background: #F6F6FB;" |[[Image:Bw_nb.png|50px]]
 
−
| style="text-align: left; background: #F6F6FB;" |On Firmware version older than 03.18.15, the device time has to be synchronized with GNSS satellites and GPS fix has to be obtained in order for the device to enter GPS Sleep mode.
 
−
|}
 
−
{{{usb_disconnected|}}}
 
−
 
 
−
{{{model|FMM6YX}}} exits GPS sleep mode if {{{txt_exit|ONE of following conditions}}} is true:
 
−
 
 
−
*Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected;
 
−
{{{txt_ignition|* Ignition (configured ignition source) is turned on.}}}
 
  
 
==Deep Sleep mode==
 
==Deep Sleep mode==
−
While in deep sleep mode, {{{model|FMM6YX}}} sets the GNSS receiver to sleep mode and turns off GSM/GPRS module (hence it is not possible to wake up the device via SMS). Despite records with the last known coordinate being saved and sent to the AVL server (GSM/GPRS module is turned on to send data and then it is turned off), power usage is decreased to save the vehicle's battery.
+
While in deep sleep mode, FMB120 sets GNSS receiver to sleep mode and turns off GSM/GPRS module (it is not possible to wake up device via SMS). Despite records with last known coordinate being saved and sent to AVL server (GSM/GPRS module is turned on to send data and then it is turned off), power usage is decreased to save vehicle's battery. Note, that power saving depends on two configurable parameters: send period and minimum record saving period in "X on Stop Mode". When records are sent successfully in deep sleep mode, open link timeout counter will be skipped and FMB120 will enter deep sleep mode immediately.<br/>Because a lot of functions are disabled in deep sleep mode 13 I/O elements are disabled from records that are generated in this mode: GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, Speed, GSM CellID, GSM Area Code, Fuel rate GPS, Active GSM Operator, Trip Odometer, Total Odometer, Fuel Used GPS and ICCID.
 +
FMB120 can enter deep sleep mode if ALL of these conditions are met:
  
−
[[Image:Deep_Sleep_.gif]]
+
* FMB120 has to be configured in Deep Sleep Mode and Sleep Timeout is reached;
 +
* Device must have time synchronized with GNSS satellites and have GPS fix;
 +
* Ignition (configured ignition source) is off;
 +
* Movement is not detected by accelerometer or configured movement source;
 +
* ''Min. Record Saving Period'' ([[FMB120 Data acquisition settings|Data Acquisition Mode settings]]) must be larger than ''Open Link Timeout'' parameter, so that FMB120 could close GPRS link;
 +
* The difference between ''Send Period'' ([[FMB120 Data acquisition settings|Data Acquisition Mode settings]]) and ''Open Link Timeout'' must be more than 90, so that FMB120 could close GPRS link within at least 90 seconds;
 +
* Forced wakeup is not set;
 +
* Have no SMS to read;
 +
* Data socket(s) are closed;
 +
* Data sending is not in progress;
 +
* FOTA is not in progress.<br/>
  
−
Please note that power saving depends on two configurable parameters: ''Send Period'' and ''Minimum Record Saving Period'' in "X on Stop Mode". When records are sent successfully in deep sleep mode, open link timeout counter will be skipped and {{{model|FMM6YX}}} will enter deep sleep mode immediately.<br />Because a lot of functions are disabled in deep sleep mode following I/O elements are disabled from records that are generated in this mode: GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, GSM CellID, GSM Area Code, Active GSM Operator{{{txt_IO|, Trip Odometer, Total Odometer, Speed, Fuel Rate GPS, Fuel Used GPS}}} and ICCID.
+
FMB120 exits deep sleep mode if ONE of the following conditions is true:
−
 
+
* Movement by accelerometer or configured movement source is detected;
−
{{#if: {{{CAN|}}} | In this mode, OBD, CAN and Eventual I/O activity is disabled. Records that are generated while the device is sleeping will not contain data from these sources, Parameter AVL IDs will also be excluded from the records. | }}
+
* Ignition (configured ignition source) is turned on.
−
{{{model|FMM6YX}}} can enter deep sleep mode if ALL of these conditions are met:
 
−
 
 
−
*{{{model|FMM6YX}}} is configured in Deep Sleep mode and sleep timeout is reached;
 
−
*Device time must be synchronized with GPS satellites. From Firmware 03.18.15 version, this condition depends on the “Records saving/sending without TS” parameter:
 
−
 
 
−
:*After Position Fix - {{{model|FMM6YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;
 
−
:*After Time Sync - {{{model|FMM6YX}}} time is synchronized over NTP, NITZ, or GNSS satellites;
 
−
:*Always - {{{model|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.
 
−
 
 
−
*Ignition (configured ignition source) is off;
 
−
 
 
−
*Movement is not detected by the accelerometer{{{txt_movement| or configured movement source}}};
 
−
*''Min. Record Saving Period'' ({{{ctrDaq|[[{{{model|FMM6YX}}} Data acquisition settings|Data Acquisition Mode settings]]}}}) must be larger than ''Open Link Timeout'' parameter, so that {{{model|FMM6YX}}} could close GPRS link;
 
−
*The difference between ''Send Period'' ({{{ctrDaq|[[{{{model|FMM6YX}}} Data acquisition settings|Data Acquisition Mode settings]]}}}) and ''Open Link Timeout'' must be more than 90 seconds, so that {{{model|FMM6YX}}} could close GPRS link within at least 90 seconds;
 
−
*There are no SMS messages being received;
 
−
*Data socket(s) are closed;
 
−
*Data sending is not in progress;
 
−
*FOTA is not in progress.<br />
 
−
 
 
−
{| class="wikitable" style="border-style: solid; border-width: 0px"
 
−
|+
 
−
|-
 
−
| style="text-align: left; background: #F6F6FB;" |[[Image:Bw_nb.png|50px]]
 
−
| style="text-align: left; background: #F6F6FB;" |On Firmware version older than 03.18.15, the device time has to be synchronized with GNSS satellites and GPS fix has to be obtained in order for the device to enter Deep Sleep mode.
 
−
|}
 
−
{{{usb_disconnected|}}}
 
−
 
 
−
{{{model|FMM6YX}}} exits deep sleep mode if {{{txt_exit|ONE of following conditions}}} is true:
 
−
 
 
−
*Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected;
 
−
{{{txt_ignition|* Ignition (configured ignition source) is turned on.}}}
 
  
 
==Online Deep Sleep mode==
 
==Online Deep Sleep mode==
 +
In this mode the device works as in Deep Sleep mode, but without deregistering from GSM network. GSM part stays powered, so this increases power consumption. In this mode, device should send/receive SMS and make/accept calls. It does not close GPRS context if one was previously opened.
 +
Conditions to enter Online Deep Sleep mode are the same as entering Deep Sleep mode.
 +
FMB120 exits Online Sleep mode if ONE of following conditions are true:
 +
* Movement by accelerometer or configured movement source is detected;
 +
* Ignition (configured Ignition Source) is turned on.
  
−
In this mode, the device works as in deep sleep mode, but without deregistering from the GSM network. GSM part stays powered so this increases power consumption. In this mode, the device should send/receive SMS and make/accept calls. It does not close the GPRS context if one was previously opened.
+
==Ultra Deep Sleep mode==
−
{{#if: {{{CAN|}}} | In this mode, OBD, CAN and Eventual I/O activity is disabled. Records that are generated while the device is sleeping will not contain data from these sources, Parameter AVL IDs will also be excluded from the records. | }}
+
Ultra battery saving mode, where GPS and GSM modem are turned off and device functions are suspended for maximum battery saving.<br/>Conditions to enter Ultra Deep Sleep mode are the same as entering Deep Sleep mode.<br/>FMB120 exits Ultra Deep Sleep mode only when DIN1 and movement are detected by accelerometer. Movement source and Ignition source configuration is not taken into account in this case.
−
 
 
−
[[Image:Online_Deep_Sleep_.gif]]
 
−
 
 
−
Conditions to enter online deep sleep mode are the same as entering deep sleep mode.
 
−
{{{model|FMM6YX}}} exits online sleep mode if {{{txt_exit|ONE of following conditions}}} is true:
 
−
 
 
−
*Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected;
 
−
{{{txt_ignition|* Ignition (configured ignition source) is turned on.}}}
 
−
<br>
 
−
<br>
 
−
{{{ultra_ds|==Ultra Deep Sleep mode==
 
−
Conditions to enter ultra deep sleep mode, where GPS and GSM modem are turned off and device functions are suspended for maximum battery saving, are the same as entering deep sleep mode.<br/>{{{model|FMM6YX}}} exits ultra deep sleep mode only when {{{txtIgnition|DIN1 or movement are}}} detected by accelerometer. Movement source {{{txt_ignition|and Ignition source configuration }}}is not taken into account in this case.}}}
 
−
 
 
−
[[Image:Ultra_Sleep.gif]]
 

Revision as of 13:24, 13 April 2018

There are three sleep modes: GPS sleep, Deep sleep and Online sleep mode.

GPS Sleep mode

FMB120 is able to go to GPS sleep mode if such mode is enabled.
Sleep mode timeout starts counting when device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, device goes to sleep mode. While in GPS sleep mode, FMB120 turns GPS module off and is still making new periodic records. As a result power usage decreases, in turn saving vehicle battery.
FMB120 will enter GPS sleep mode if ALL of these conditions are met:

  • FMB120 has to be configured to work in GPS Sleep mode and sleep timeout is reached;
  • Device must have time synchronized with GNSS satellites and have GPS fix;
  • No movement by configured movement source or movement sensor is detected;
  • Ignition (configured ignition source) is off;
  • Forced wakeup is not set;
  • Have no SMS to read.

FMB120 exits GPS sleep mode if ONE of following conditions is true:

  • Movement by movement source or movement sensor is detected;
  • Ignition (configured ignition source) is turned on.

Deep Sleep mode

While in deep sleep mode, FMB120 sets GNSS receiver to sleep mode and turns off GSM/GPRS module (it is not possible to wake up device via SMS). Despite records with last known coordinate being saved and sent to AVL server (GSM/GPRS module is turned on to send data and then it is turned off), power usage is decreased to save vehicle's battery. Note, that power saving depends on two configurable parameters: send period and minimum record saving period in "X on Stop Mode". When records are sent successfully in deep sleep mode, open link timeout counter will be skipped and FMB120 will enter deep sleep mode immediately.
Because a lot of functions are disabled in deep sleep mode 13 I/O elements are disabled from records that are generated in this mode: GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, Speed, GSM CellID, GSM Area Code, Fuel rate GPS, Active GSM Operator, Trip Odometer, Total Odometer, Fuel Used GPS and ICCID. FMB120 can enter deep sleep mode if ALL of these conditions are met:

  • FMB120 has to be configured in Deep Sleep Mode and Sleep Timeout is reached;
  • Device must have time synchronized with GNSS satellites and have GPS fix;
  • Ignition (configured ignition source) is off;
  • Movement is not detected by accelerometer or configured movement source;
  • Min. Record Saving Period (Data Acquisition Mode settings) must be larger than Open Link Timeout parameter, so that FMB120 could close GPRS link;
  • The difference between Send Period (Data Acquisition Mode settings) and Open Link Timeout must be more than 90, so that FMB120 could close GPRS link within at least 90 seconds;
  • Forced wakeup is not set;
  • Have no SMS to read;
  • Data socket(s) are closed;
  • Data sending is not in progress;
  • FOTA is not in progress.

FMB120 exits deep sleep mode if ONE of the following conditions is true:

  • Movement by accelerometer or configured movement source is detected;
  • Ignition (configured ignition source) is turned on.

Online Deep Sleep mode

In this mode the device works as in Deep Sleep mode, but without deregistering from GSM network. GSM part stays powered, so this increases power consumption. In this mode, device should send/receive SMS and make/accept calls. It does not close GPRS context if one was previously opened. Conditions to enter Online Deep Sleep mode are the same as entering Deep Sleep mode. FMB120 exits Online Sleep mode if ONE of following conditions are true:

  • Movement by accelerometer or configured movement source is detected;
  • Ignition (configured Ignition Source) is turned on.

Ultra Deep Sleep mode

Ultra battery saving mode, where GPS and GSM modem are turned off and device functions are suspended for maximum battery saving.
Conditions to enter Ultra Deep Sleep mode are the same as entering Deep Sleep mode.
FMB120 exits Ultra Deep Sleep mode only when DIN1 and movement are detected by accelerometer. Movement source and Ignition source configuration is not taken into account in this case.

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB_Sleep_modes&oldid=7748"