Difference between revisions of "Impulse counter"
From Wiki Knowledge Base | Teltonika GPS
m |
|||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | '''FMB''' devices have pulse counter capability out of the box from firmware 03. | + | '''FMB''' devices have pulse counter capability out of the box from firmware [[FMB firmware errata#03.25.05.Rev.00|03.25.05.Rev.00]] and later. |
'''Use case:''' | '''Use case:''' | ||
| Line 5: | Line 5: | ||
Pulse counter functionality enables the FMB devices to count digital impulses going to DIN1/DIN2. This means that 2 digital inputs of the FMB devices can now be used for precise fuel flow meter data reading. Impulse based fuel usage monitoring is much more accurate than a different type of fuel metering sensors and it makes the FMB devices a perfect solution for high fuel usage machines like cranes, construction vehicles, mining machines, agriculture equipment. | Pulse counter functionality enables the FMB devices to count digital impulses going to DIN1/DIN2. This means that 2 digital inputs of the FMB devices can now be used for precise fuel flow meter data reading. Impulse based fuel usage monitoring is much more accurate than a different type of fuel metering sensors and it makes the FMB devices a perfect solution for high fuel usage machines like cranes, construction vehicles, mining machines, agriculture equipment. | ||
| − | ''' | + | '''How does it work?''' |
| − | <table class="nd-othertables_2" style="width: 30%;"> | + | |
| + | When pulse counter I/O is enabled, then Pulse Counter DIN1/DIN2 will count every DIN1/DIN2 state change to HIGH and send the counted number with the next record. Pulse counter value is reset after sending the record.[[File:Pulse_counter.gif|center|]]Specification | ||
| + | |||
| + | Maximum supported frequency is 50Hz. | ||
| + | |||
| + | Maximum value 2147483647. | ||
| + | |||
| + | High level: | ||
| + | |||
| + | Input Voltage threshold (DIN1) 7.5V | ||
| + | |||
| + | Input Voltage threshold (DIN2) 2.5V<table class="nd-othertables_2" style="width: 30%;"> | ||
<tr> | <tr> | ||
<th style="width: 10%; text-align:center; vertical-align:middle;">Model</th> | <th style="width: 10%; text-align:center; vertical-align:middle;">Model</th> | ||
| − | <th style="width: 10%; text-align:center; vertical-align:middle;">DIN1 Max frequency, Hz | + | <th style="width: 10%; text-align:center; vertical-align:middle;">DIN1 |
| + | Max frequency, Hz | ||
</th> | </th> | ||
| − | <th style="width: 10%; text-align:center; vertical-align:middle;">DIN2 Max frequency, Hz | + | <th style="width: 10%; text-align:center; vertical-align:middle;">DIN2 |
| + | Max frequency, Hz | ||
</th><th>Input Voltage threshold (DIN1)</th><th>Input Voltage threshold (DIN2)</th></tr> | </th><th>Input Voltage threshold (DIN1)</th><th>Input Voltage threshold (DIN2)</th></tr> | ||
<tr> | <tr> | ||
| − | <td style="width: 10%; text-align:center; vertical-align:middle;"> | + | <td style="width: 10%; text-align:center; vertical-align:middle;">[[FMB920]]</td> |
| − | [[FMB920]] | ||
| − | </td> | ||
<td style="width: 10%; text-align:center; vertical-align:middle;">2000</td> | <td style="width: 10%; text-align:center; vertical-align:middle;">2000</td> | ||
| − | <td style="width: 10%; text-align:center; vertical-align:middle;">-</td> | + | <td style="width: 10%; text-align:center; vertical-align:middle;">-</td><td>7.5V</td><td> -</td></tr> |
| − | |||
| − | |||
<tr> | <tr> | ||
<td style="width: 10%; text-align:center; vertical-align:middle;">[[FMB110]] | <td style="width: 10%; text-align:center; vertical-align:middle;">[[FMB110]] | ||
| Line 36: | Line 45: | ||
</td> | </td> | ||
<td style="width: 10%; text-align:center; vertical-align:middle;">50</td> | <td style="width: 10%; text-align:center; vertical-align:middle;">50</td> | ||
| − | <td style="width: 10%; text-align:center; vertical-align:middle;">2000</td> | + | <td style="width: 10%; text-align:center; vertical-align:middle;">2000</td><td> |
| − | + | ||
| − | |||
| − | |||
| Line 53: | Line 60: | ||
</td> | </td> | ||
<td style="width: 10%; text-align:center; vertical-align:middle;">50</td> | <td style="width: 10%; text-align:center; vertical-align:middle;">50</td> | ||
| − | <td style="width: 10%; text-align:center; vertical-align:middle;"> | + | <td style="width: 10%; text-align:center; vertical-align:middle;">2.5</td><td></td><td></td></tr></table> |
| − | |||
| − | |||
| − | <td></td><td></td></tr></table> | ||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 15:28, 8 November 2022
FMB devices have pulse counter capability out of the box from firmware 03.25.05.Rev.00 and later.
Use case:
Pulse counter functionality enables the FMB devices to count digital impulses going to DIN1/DIN2. This means that 2 digital inputs of the FMB devices can now be used for precise fuel flow meter data reading. Impulse based fuel usage monitoring is much more accurate than a different type of fuel metering sensors and it makes the FMB devices a perfect solution for high fuel usage machines like cranes, construction vehicles, mining machines, agriculture equipment.
How does it work?
When pulse counter I/O is enabled, then Pulse Counter DIN1/DIN2 will count every DIN1/DIN2 state change to HIGH and send the counted number with the next record. Pulse counter value is reset after sending the record.
Specification
Maximum supported frequency is 50Hz.
Maximum value 2147483647.
High level:
Input Voltage threshold (DIN1) 7.5V
Input Voltage threshold (DIN2) 2.5V
| Model | DIN1
Max frequency, Hz |
DIN2
Max frequency, Hz | Input Voltage threshold (DIN1) | Input Voltage threshold (DIN2) |
|---|---|---|---|---|
| FMB920 | 2000 | - | 7.5V | - |
| FMB110 | 50 | 2000 |
|
|
| FMB125 | 50 | 2.5 |
