Changes

[[FMB640]] supports Iridium devices which can send short burst data (SBD) to the server. This means that some data can be sent from FM device to the server through satellites.  

[[FMB640]] supports Iridium devices which can send short burst data (SBD) to the server. This means that some data can be sent from FM device to the server through satellites.  

In order to properly connect the Iridium device to {{{device|}}}, Iridium has to be connected to the device via RS-232 - COM1 or COM2 (with RJ-45 connector, where 4 pin is GND, 5 pin is RS232 Rx and 6 PIN is RS232 Tx). Additionally '''Pin No. 6''' - power control (reference in the image below) must be connected to one of the {{{device|}}} DOUTs (1/2/3/4), in order to allow the device to power ON/OFF Iridium device on demand.

In order to properly connect the Iridium device to {{{device|}}}, Iridium has to be connected to the device via RS-232 - COM1 or COM2 (with RJ-45 connector, where 4 pin is GND, 5 pin is RS232 Rx and 6 PIN is RS232 Tx). Additionally '''Pin No. 6''' - power control (reference in the image below) must be connected to one of the {{{device|}}} DOUTs (1/2/3/4), in order to allow the device to power ON/OFF Iridium device on demand. More information can be found here [[{{{device|}}} _Short_Burst_Data]].

Iridium Edge pinout and RS232 COM 1/2 connection:  

Iridium Edge pinout and RS232 COM 1/2 connection: