Wiki Knowledge Base | Teltonika GPS

Changes

CONTINUOUS NETWORK CONNECTIVITY WITH AUTO TOP-UP FEATURE (view source)

Revision as of 07:51, 23 February 2023

5,780 bytes removed ,  07:51, 23 February 2023
no edit summary
Line 12: Line 12:  
Fortunately, Teltonika Telematics has a practical solution to help corporate fleets avoid such needless fines and ensure that the SIM cards of GPS trackers are always connected to the GSM network.
 
Fortunately, Teltonika Telematics has a practical solution to help corporate fleets avoid such needless fines and ensure that the SIM cards of GPS trackers are always connected to the GSM network.
   −
Every single Teltonika vehicle GPS tracker has a placeholder for a plastic (regular) SIM card or a possibility to install an eSIM module. The SIM card or eSIM is part of the Teltonika Global Connectivity Solution and is used to connect to mobile networks, and the GPS device will be able to send and receive data to and from locations covered by the data plan.
+
Every single Teltonika vehicle GPS tracker has a placeholder for a plastic (regular) SIM card or a possibility to install an eSIM module. The SIM card or eSIM is part of the Teltonika [https://teltonika-gps.com/products/solutions/teltonika-connectivity-solution Global Connectivity Solution] and is used to connect to mobile networks, and the GPS device will be able to send and receive data to and from locations covered by the data plan.
−
 
+
[[File:Truphone_solution.png|left|frameless|700x700px]]
−
For example, the Teltonika Global Plan currently allows you to prevent roaming costs in 110 countries around the world and uses the same amount of data anywhere. But the fact is, any data plan has a limited number of megabytes, and if they are used up, a GPS tracker loses an access to the mobile network.
+
For example, the Teltonika Global Plan currently allows you to prevent roaming costs in 134 countries around the world and uses the same amount of data anywhere. But the fact is, any data plan has a limited number of megabytes, and if they are used up, a GPS tracker loses an access to the mobile network.
    
How it works - to keep SIM cards up and running continuously without physical and manual interference, we offer the convenient and practical Auto Top-Up feature. As the name implies, when properly set up, this function automatically renews the same data plan under the same conditions when the remaining amount of data has been used up to a specified limit. Thanks to it, fleet managers and business owners will not run into trouble if a SIM card plan data is nearly used up, or expiration term is around the corner but a person in charge has missed all the notifications, off duty, or simply forgot to top up the plan timely.
 
How it works - to keep SIM cards up and running continuously without physical and manual interference, we offer the convenient and practical Auto Top-Up feature. As the name implies, when properly set up, this function automatically renews the same data plan under the same conditions when the remaining amount of data has been used up to a specified limit. Thanks to it, fleet managers and business owners will not run into trouble if a SIM card plan data is nearly used up, or expiration term is around the corner but a person in charge has missed all the notifications, off duty, or simply forgot to top up the plan timely.
Line 27: Line 27:  
==Installation==
 
==Installation==
   −
It’s important to hide the tracker, so it would not be a simple task for the thieves to find and unplug it. But also, please do not forget to follow [https://wiki.teltonika-gps.com/view/FMB130_First_Start#Mounting_recommendations mounting recommendations] as well (using the FMB130 device as an example).
+
Install the tracker according to [https://wiki.teltonika-gps.com/view/FMB130_First_Start#Mounting_recommendations mounting recommendations] as well (using the FMB130 device as an example).
    
Although devices have high gain antennas it’s important to mount devices with stickers on top and in metal-free space. The device should be firmly fixed to the surface or cables. Please make sure, that device is not fixed to heat emitting or moving parts.
 
Although devices have high gain antennas it’s important to mount devices with stickers on top and in metal-free space. The device should be firmly fixed to the surface or cables. Please make sure, that device is not fixed to heat emitting or moving parts.
Line 36: Line 36:  
==Configuration==
 
==Configuration==
   −
==='''1. Prerequisites:'''===
+
==='''Prerequisites:'''===
   −
====1.1. Read through [https://wiki.teltonika-gps.com/view/FMB130_First_Start First start guide]====
+
====Read through [https://wiki.teltonika-gps.com/view/FMB130_First_Start First start guide]====
−
====1.2. Understanding of possible [https://wiki.teltonika-gps.com/view/FMB130_Sleep_modes Sleep modes].====
+
====Understanding of possible [https://wiki.teltonika-gps.com/view/FMB130_Sleep_modes Sleep modes].====
−
==='''2. Car sharing configuration:'''===
+
====Activate on the [https://account.truphone.com/login?redirectUrl=https://iot.truphone.com/ IoT Platform] using the details provided by the sales manager.====
−
1.    Open the IoT Platform at https://account.truphone.com/login and log in.
+
==='''CONTINUOUS NETWORK CONNECTIVITY WITH AUTO TOP-UP FEATURE configuration:'''===
   −
2.    Navigate to the "Rules" menu and add a new Usage rule (Please refer to Picture 1)
+
1.    Navigate to the "Rules" menu and add a new Usage rule (Please refer to Picture 1)
−
[[File:AutoTopUp1.jpg|thumb|none|Picture 1. '''Rules menu'''|link=Special:FilePath/AutoTopUp1.jpg]]
+
[[File:AutoTopUp1.jpg|thumb|none|frameless|1155x1155px|Picture 1. '''Rules menu'''|link=Special:FilePath/AutoTopUp1.jpg]]
   −
3.    In the "Label" window enter Your preferred name. To distinguish different rules, in this example name is "Auto Top Up" (Please refer to Picture 2)
+
2.    In the "Label" window enter Your preferred name. To distinguish different rules, in this example name is "Auto Top Up" (Please refer to Picture 2)
−
[[File:AutoTopUp2.jpg|thumb|none|Picture 2. '''Label'''|link=Special:FilePath/AutoTopUp2.jpg]]
+
[[File:AutoTopUp2.jpg|thumb|none|frameless|1155x1155px|Picture 2. '''Label'''|link=Special:FilePath/AutoTopUp2.jpg]]
   −
4.    In the "Rule Triggers" select the following settings (Please refer to Picture 3):
+
3.    In the "Rule Triggers" select the following settings (Please refer to Picture 3):
    
* When — Data Usage.
 
* When — Data Usage.
Line 56: Line 56:  
* Over the — Current Rate Plan
 
* Over the — Current Rate Plan
 
* Country/Network — Any Country/Network
 
* Country/Network — Any Country/Network
−
[[File:AutoTopUp3.jpg|thumb|none|Picture 3. '''Rule Triggers'''|link=Special:FilePath/AutoTopUp3.jpg]]
+
[[File:AutoTopUp3.jpg|thumb|none|frameless|1155x1155px|Picture 3. '''Rule Triggers'''|link=Special:FilePath/AutoTopUp3.jpg]]
   −
5.    In SIM Card(s) window select "All SIM Cards" (Please refer to Picture 4)
+
4.    In SIM Card(s) window select "All SIM Cards" (Please refer to Picture 4)
−
[[File:AutoTopUp5.jpg|thumb|none|Picture 4. '''SIM Card(s)'''|link=Special:FilePath/AutoTopUp5.jpg]]
+
[[File:AutoTopUp5.jpg|thumb|none|frameless|1155x1155px|Picture 4. '''SIM Card(s)'''|link=Special:FilePath/AutoTopUp5.jpg]]
   −
6.    In the Actions window select the rate plan that will be applied to the SIM card and <b>Uncheck</b> "Change next billing cycle" (Please refer to Picture 5)
+
5.    In the Actions window select the rate plan that will be applied to the SIM card and <b>Uncheck</b> "Change next billing cycle" (Please refer to Picture 5)
−
[[File:AutoTopUp6.jpg|thumb|none|Picture 6. '''Actions'''|link=Special:FilePath/AutoTopUp6.jpg]]
+
[[File:AutoTopUp6.jpg|thumb|none|frameless|1155x1155px|Picture 6. '''Actions'''|link=Special:FilePath/AutoTopUp6.jpg]]
   −
7.    Select an email where the notification will be sent (Please refer to Picture 6)
+
6.    Select an email where the notification will be sent (Please refer to Picture 6)
−
[[File:AutoTopUp7.jpg|thumb|none|Picture 7. '''Notifications'''|link=Special:FilePath/AutoTopUp7.jpg]]
+
[[File:AutoTopUp7.jpg|thumb|none|frameless|1155x1155px|Picture 7. '''Notifications'''|link=Special:FilePath/AutoTopUp7.jpg]]
 
==Parsing information==
 
==Parsing information==
   −
==='''1.Prerequisites:'''===
+
==='''Prerequisites:'''===
   −
==== 1.1.  Open [https://wiki.teltonika-gps.com/view/Opening_TCP/UDP_port TCP/UDP port]====
+
====Open [https://wiki.teltonika-gps.com/view/Opening_TCP/UDP_port TCP/UDP port]====
   −
==== 1.2.  Read Java parser  [https://wiki.teltonika-gps.com/view/Java_Parser_First_Start_Guide first start guide]====
+
====Read Java parser  [https://wiki.teltonika-gps.com/view/Java_Parser_First_Start_Guide first start guide]====
   −
=== '''2. Parsing example:''' ===
+
=== '''Parsing example:''' ===
 
{| class="nd-othertables_2" style="width:100%;"
 
{| class="nd-othertables_2" style="width:100%;"
 +
|+
 
! rowspan="1" style="width:100%; vertical-align: middle; text-align: center;" |Unparsed received data in hexadecimal stream
 
! rowspan="1" style="width:100%; vertical-align: middle; text-align: center;" |Unparsed received data in hexadecimal stream
 
|-
 
|-
−
| style="vertical-align: middle; text-align: center;" | 000000000000008F080100000177B0A5F838000000000000000000004400280D0000001F09EF00F0001504B301B40051005200590098000B42307443
+
| style="vertical-align: middle; text-align: center;" |000000000000004608010000017501DAF828010F0E4792209AC4FB00C200D70C0000F90D06EF01F00
−
0F8244000011001812002D13FFE85400BE5500005A0000970000A800000AF10000601A53000000005703CB6B986400002E
+
01503C8004501F900B50005B6000342334D43000044000002F10000601A100000000000010000732E
−
97660000000069023B33856B000065B27B000000007D00000000BD000000000184<span style="background:#0b9768">0080000030000005</span>0100005C92
+
|-
 +
|}
 +
 
   −
|}
   
{| class="nd-othertables_2" style="width:100%;"
 
{| class="nd-othertables_2" style="width:100%;"
 +
|+
 +
! colspan="2" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |AVL Data Packet
 
|-
 
|-
 
! rowspan="1" style="width:50%; vertical-align: middle; text-align: center;" |AVL Data Packet Part
 
! rowspan="1" style="width:50%; vertical-align: middle; text-align: center;" |AVL Data Packet Part
 
! rowspan="1" style="width:50%; vertical-align: middle; text-align: center;" |HEX Code Part
 
! rowspan="1" style="width:50%; vertical-align: middle; text-align: center;" |HEX Code Part
 
|-
 
|-
−
| style="vertical-align: middle; text-align: center;" | Zero Bytes
+
| style="vertical-align: middle; text-align: center;" |Zero Bytes
 
| style="vertical-align: middle; text-align: center;" |00 00 00 00
 
| style="vertical-align: middle; text-align: center;" |00 00 00 00
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Data Field Length
 
| style="vertical-align: middle; text-align: center;" |Data Field Length
−
| style="vertical-align: middle; text-align: center;" |00 00 00 8F
+
| style="vertical-align: middle; text-align: center;" |00 00 00 D6
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Codec ID
 
| style="vertical-align: middle; text-align: center;" |Codec ID
Line 101: Line 105:  
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Timestamp
 
| style="vertical-align: middle; text-align: center;" |Timestamp
−
| style="vertical-align: middle; text-align: center;" |00 00 01 77 B0 A5 F8 38 (Thursday, February 18, 2021 3:43:00 PM GMT+02:00)
+
| style="vertical-align: middle; text-align: center;" |00 00 01 75 01 DA F8 28 (Wed Oct 07 06:58:49 UTC 2020)
 
|-
 
|-
−
| style="vertical-align: middle; text-align: center;" | Priority
+
| style="vertical-align: middle; text-align: center;" |Priority
−
| style="vertical-align: middle; text-align: center;" |00
+
| style="vertical-align: middle; text-align: center;" |01
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Longitude
 
| style="vertical-align: middle; text-align: center;" |Longitude
−
| style="vertical-align: middle; text-align: center;" |00 00 00 00
+
| style="vertical-align: middle; text-align: center;" |0F 0E 47 92
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Latitude
 
| style="vertical-align: middle; text-align: center;" |Latitude
−
| style="vertical-align: middle; text-align: center;" |00 00 00 00
+
| style="vertical-align: middle; text-align: center;" |20 9A C4 FB
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Altitude
 
| style="vertical-align: middle; text-align: center;" |Altitude
−
| style="vertical-align: middle; text-align: center;" |00 44
+
| style="vertical-align: middle; text-align: center;" |00 C2
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Angle
 
| style="vertical-align: middle; text-align: center;" |Angle
−
| style="vertical-align: middle; text-align: center;" |00 28
+
| style="vertical-align: middle; text-align: center;" |00 D7
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Satellites
 
| style="vertical-align: middle; text-align: center;" |Satellites
−
| style="vertical-align: middle; text-align: center;" |0D
+
| style="vertical-align: middle; text-align: center;" |0C
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Speed
 
| style="vertical-align: middle; text-align: center;" |Speed
Line 125: Line 129:  
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Event IO ID
 
| style="vertical-align: middle; text-align: center;" |Event IO ID
−
| style="vertical-align: middle; text-align: center;" |00
+
| style="vertical-align: middle; text-align: center;" |F9 (AVL ID: 249, Name: Jamming)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |N of Total ID
 
| style="vertical-align: middle; text-align: center;" |N of Total ID
−
| style="vertical-align: middle; text-align: center;" |1F
+
| style="vertical-align: middle; text-align: center;" |0D
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |N1 of One Byte IO
 
| style="vertical-align: middle; text-align: center;" |N1 of One Byte IO
−
| style="vertical-align: middle; text-align: center;" |09
+
| style="vertical-align: middle; text-align: center;" |06
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |1’st IO ID
 
| style="vertical-align: middle; text-align: center;" |1’st IO ID
Line 137: Line 141:  
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |1’st IO Value
 
| style="vertical-align: middle; text-align: center;" |1’st IO Value
−
| style="vertical-align: middle; text-align: center;" |00
+
| style="vertical-align: middle; text-align: center;" |01
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |2’nd IO ID
 
| style="vertical-align: middle; text-align: center;" |2’nd IO ID
Line 145: Line 149:  
| style="vertical-align: middle; text-align: center;" |00
 
| style="vertical-align: middle; text-align: center;" |00
 
|-
 
|-
−
| style="vertical-align: middle; text-align: center;" | 3’rd IO ID
+
| style="vertical-align: middle; text-align: center;" |3’rd IO ID
 
| style="vertical-align: middle; text-align: center;" |15 (AVL ID: 21, Name: GSM Signal)
 
| style="vertical-align: middle; text-align: center;" |15 (AVL ID: 21, Name: GSM Signal)
 
|-
 
|-
−
| style="vertical-align: middle; text-align: center;" | 3’rd IO Value
+
| style="vertical-align: middle; text-align: center;" |3’rd IO Value
−
| style="vertical-align: middle; text-align: center;" |04
+
| style="vertical-align: middle; text-align: center;" |03
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |4'th IO ID
 
| style="vertical-align: middle; text-align: center;" |4'th IO ID
−
| style="vertical-align: middle; text-align: center;" |B3 (AVL ID: 179, Name: Digital Output 1)
+
| style="vertical-align: middle; text-align: center;" |C8 (AVL ID: 200, Name: Sleep Mode)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |4'th IO Value
 
| style="vertical-align: middle; text-align: center;" |4'th IO Value
−
| style="vertical-align: middle; text-align: center;" |01
+
| style="vertical-align: middle; text-align: center;" |00
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |5'th IO ID
 
| style="vertical-align: middle; text-align: center;" |5'th IO ID
−
| style="vertical-align: middle; text-align: center;" |B4 (AVL ID: 180, Name: Digital Output 2)
+
| style="vertical-align: middle; text-align: center;" |45 (AVL ID: 69, Name: GNSS Status)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |5'th IO Value
 
| style="vertical-align: middle; text-align: center;" |5'th IO Value
−
| style="vertical-align: middle; text-align: center;" | 00
+
| style="vertical-align: middle; text-align: center;" |01
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |6'th IO ID
 
| style="vertical-align: middle; text-align: center;" |6'th IO ID
−
| style="vertical-align: middle; text-align: center;" |51 (AVL ID: 81, Name: Vehicle Speed)
+
| style="vertical-align: middle; text-align: center;" |F9 (AVL ID: 249, Name: Jamming)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |6'th IO Value
 
| style="vertical-align: middle; text-align: center;" |6'th IO Value
−
| style="vertical-align: middle; text-align: center;" | 00
+
| style="vertical-align: middle; text-align: center;" |00 (0 – jamming stop, 1 – jamming start)
−
|-
  −
| style="vertical-align: middle; text-align: center;" |7'th IO ID
  −
| style="vertical-align: middle; text-align: center;" |52 (AVL ID: 82, Name: Accelerator Pedal Position)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |7'th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |8'th IO ID
  −
| style="vertical-align: middle; text-align: center;" |59 (AVL ID: 89, Name: Fuel level)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |8'th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |9'th IO ID
  −
| style="vertical-align: middle; text-align: center;" |98 (AVL ID: 152, Name: Geofence zone 05)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |9'th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00
   
|-
 
|-
−
| style="vertical-align: middle; text-align: center;" | N2 of Two Byte IO
+
| style="vertical-align: middle; text-align: center;" |N1 of Two Byte IO
−
| style="vertical-align: middle; text-align: center;" |0B
+
| style="vertical-align: middle; text-align: center;" |05
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |1’st IO ID
 
| style="vertical-align: middle; text-align: center;" |1’st IO ID
−
| style="vertical-align: middle; text-align: center;" |42 (AVL ID: 66, Name: External Voltage)
+
| style="vertical-align: middle; text-align: center;" |B5 (AVL ID: 181, Name: GNSS PDOP)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |1’st IO Value
 
| style="vertical-align: middle; text-align: center;" |1’st IO Value
−
| style="vertical-align: middle; text-align: center;" |30 74
+
| style="vertical-align: middle; text-align: center;" |00 05
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |2’nd IO ID
 
| style="vertical-align: middle; text-align: center;" |2’nd IO ID
−
| style="vertical-align: middle; text-align: center;" |43 (AVL ID: 67, Name: Battery Voltage)
+
| style="vertical-align: middle; text-align: center;" |B6 (AVL ID: 182, Name: GNSS HDOP)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |2’nd IO Value
 
| style="vertical-align: middle; text-align: center;" |2’nd IO Value
−
| style="vertical-align: middle; text-align: center;" |0F 82
+
| style="vertical-align: middle; text-align: center;" |00 03
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |3’rd IO ID
 
| style="vertical-align: middle; text-align: center;" |3’rd IO ID
−
| style="vertical-align: middle; text-align: center;" |44 (AVL ID: 68, Name: Battery Current)
+
| style="vertical-align: middle; text-align: center;" |42 (AVL ID: 66, Name: External Voltage)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |3’rd IO Value
 
| style="vertical-align: middle; text-align: center;" |3’rd IO Value
−
| style="vertical-align: middle; text-align: center;" |00 00
+
| style="vertical-align: middle; text-align: center;" |33 4D
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |4'th IO ID
 
| style="vertical-align: middle; text-align: center;" |4'th IO ID
−
| style="vertical-align: middle; text-align: center;" |11 (AVL ID: 17, Name: Axis X)
+
| style="vertical-align: middle; text-align: center;" |43 (AVL ID: 67, Name: Battery Voltage)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |4'th IO Value
 
| style="vertical-align: middle; text-align: center;" |4'th IO Value
−
| style="vertical-align: middle; text-align: center;" |00 18
+
| style="vertical-align: middle; text-align: center;" |00 00
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |5'th IO ID
 
| style="vertical-align: middle; text-align: center;" |5'th IO ID
−
| style="vertical-align: middle; text-align: center;" |12 (AVL ID: 18,Name: Axis Y)
+
| style="vertical-align: middle; text-align: center;" |44 (AVL ID: 68, Name: Battery Current)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |5'th IO Value
 
| style="vertical-align: middle; text-align: center;" |5'th IO Value
−
| style="vertical-align: middle; text-align: center;" |0F 8A
  −
|-
  −
| style="vertical-align: middle; text-align: center;" | 6'th IO ID
  −
| style="vertical-align: middle; text-align: center;" |13 (AVL ID: 19, Name: Axis Z)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |6'th IO Value
  −
| style="vertical-align: middle; text-align: center;" |FF E8
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |7'th IO ID
  −
| style="vertical-align: middle; text-align: center;" |54 (AVL ID: 84,Name: Fuel level)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |7'th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00 BE
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |8'th IO ID
  −
| style="vertical-align: middle; text-align: center;" |55 (AVL ID:85, Name: Engine RPM)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |8’th IO Value
   
| style="vertical-align: middle; text-align: center;" |00 00
 
| style="vertical-align: middle; text-align: center;" |00 00
 
|-
 
|-
−
| style="vertical-align: middle; text-align: center;" |9'th IO ID
+
| style="vertical-align: middle; text-align: center;" |N4 of Four Bytes IO
−
| style="vertical-align: middle; text-align: center;" |5A (AVL ID:90, Name: Door Status)
+
| style="vertical-align: middle; text-align: center;" |02
 
|-
 
|-
−
| style="vertical-align: middle; text-align: center;" |9’th IO Value
+
| style="vertical-align: middle; text-align: center;" |1’st IO ID
−
| style="vertical-align: middle; text-align: center;" |00 00
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |10'th IO ID
  −
| style="vertical-align: middle; text-align: center;" |97 (AVL ID:151, Name: Battery Temperature)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |10'th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00 00
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |11'th IO ID
  −
| style="vertical-align: middle; text-align: center;" |A8 (AVL ID: 168, Battery Voltage)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |11'th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00 00
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |N4 of Four Byte IO
  −
| style="vertical-align: middle; text-align: center;" |0A
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |1'st IO ID
   
| style="vertical-align: middle; text-align: center;" |F1 (AVL ID: 241, Name: Active GSM Operator)
 
| style="vertical-align: middle; text-align: center;" |F1 (AVL ID: 241, Name: Active GSM Operator)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |1’st IO Value
 
| style="vertical-align: middle; text-align: center;" |1’st IO Value
−
| style="vertical-align: middle; text-align: center;" | 00 00 60 1A
+
| style="vertical-align: middle; text-align: center;" |00 00 60 1A
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |2’nd IO ID
 
| style="vertical-align: middle; text-align: center;" |2’nd IO ID
−
| style="vertical-align: middle; text-align: center;" |53 (AVL ID: 83, Name: Fuel Consumed)
+
| style="vertical-align: middle; text-align: center;" |10 (AVL ID: 16, Name: Total Odometer)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |2’nd IO Value
 
| style="vertical-align: middle; text-align: center;" |2’nd IO Value
 
| style="vertical-align: middle; text-align: center;" |00 00 00 00
 
| style="vertical-align: middle; text-align: center;" |00 00 00 00
 
|-
 
|-
−
| style="vertical-align: middle; text-align: center;" |3’rd IO ID
+
| style="vertical-align: middle; text-align: center;" |N8 of Eight Bytes IO
−
| style="vertical-align: middle; text-align: center;" |57 (AVL ID: 87, Name: Total Mileage)
+
| style="vertical-align: middle; text-align: center;" |00
−
|-
  −
| style="vertical-align: middle; text-align: center;" |3’rd IO Value
  −
| style="vertical-align: middle; text-align: center;" |03 CB 6B 98
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |4’th IO ID
  −
| style="vertical-align: middle; text-align: center;" |64 (AVL ID: 100, Name: Program Number)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |4’th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00 00 2E 97
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |5’th IO ID
  −
| style="vertical-align: middle; text-align: center;" |66 (AVL ID: 102, Name: Engine Worktime)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |5’th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00 00 00 00
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |6’th IO ID
  −
| style="vertical-align: middle; text-align: center;" |69 (AVL ID: 105, Name: Total Mileage (counted))
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |6’th IO Value
  −
| style="vertical-align: middle; text-align: center;" |02 3B 33 85
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |7’th IO ID
  −
| style="vertical-align: middle; text-align: center;" |6B (AVL ID: 107, Name: Fuel Consumed(counted))
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |7’th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00 00 65 B2
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |8’th IO ID
  −
| style="vertical-align: middle; text-align: center;" |7B (AVL ID: 123, Name: Control State Flags)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |8’th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00 00 00 00
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |9’th IO ID
  −
| style="vertical-align: middle; text-align: center;" |7D (AVL ID: 125, Name: Harvesting Time)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |9’th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00 00 00 00
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |10’th IO ID
  −
| style="vertical-align: middle; text-align: center;" |BD (AVL ID: 189, Name: Cruise Time)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |10’th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00 00 00 00
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |N8 of Eight Byte IO
  −
| style="vertical-align: middle; text-align: center;" |01
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |1'st IO ID
  −
| style="vertical-align: middle; text-align: center;" |<span style="background:#0b9768">84 (AVL ID: 132, Name: Security State Flags)</span>
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |1’st IO Value
  −
| style="vertical-align: middle; text-align: center;" |<span style="background:#0b9768">00 80 00 00 30 00 00 05</span>
   
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Number of Data 2 (Number of Total Records)
 
| style="vertical-align: middle; text-align: center;" |Number of Data 2 (Number of Total Records)
Line 332: Line 228:  
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |CRC-16
 
| style="vertical-align: middle; text-align: center;" |CRC-16
−
| style="vertical-align: middle; text-align: center;" |00 00 5C 92
+
| style="vertical-align: middle; text-align: center;" |00 00 73 2E
 +
|-
 
|}
 
|}
   −
Security State Flag Examples:
  −
*1) Locked doors <span style="background:#0b9768">00 80 00 00 30 00 00 05</span>
  −
*2) Unlocked doors <span style="background:#d4f991">00 80 00 00 00 00 00 05</span>
     −
Convert HEX value to BIN value:
+
==Demonstration in platform==
   −
Then count 28'th BIT from the back (28'th bit value shows locked/unlocked states)
  −
*1) 100000000000000000000000001<span style="background:#0b9768">1</span>0000000000000000000000000101
  −
*2) 100000000000000000000000000<span style="background:#d4f991">0</span>0000000000000000000000000101
  −
If car is locked value is <span style="background:#0b9768>1</span> and if car is unlocked value is <span style="background:#d4f991">0</span>
     −
To test the car unlocking and locking use these GPRS commands
+
WIALON: Open WIALON → open messages → push unit ( select your device) → choose the date from which to show the records → select message  (data messages) → push execute button and you will see all information.
−
*1) To unlock all doors use this command: "lvcanopenalldoors"
+
[[File:Wialon_CONTINUOUS_NETWORK_CONNECTIVITY_WITH_AUTO_TOP-UP_FEATURE.png|left|frameless|1155x1155px]]
−
*2) To lock all doors use this command: "lvcanclosealldoors"
      
[[Category: Usage scenarios]]
 
[[Category: Usage scenarios]]
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/80105...80427"