Changes

2,392 bytes added , 11:20, 10 March 2023

m

Protected "FISHING BOATS TRACKING WITH IP67 RATING GPS DEVICES" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

Line 14: Line 14:

==Installation==

−

~~Device should be mounted with the sticker view to the open sky.~~

[[File:FMC230_07.png|center|400px]]

−

FMC230 device should be mounted with the device logo view to the open sky for the best device performance with not less than ¾ of metal free area. FMC230 has IP67 protection class. Top performance is reached if mounted outside of the ~~vehicle~~.

+

FMC230 device should be mounted with the device logo view to the open sky for the best device performance with not less than ¾ of metal free area. FMC230 has IP67 protection class. Top performance is reached if mounted outside the boat on the cover. The device has adhesive tape to securely place the device. SIM card should be inserted in the module while the connector is plugged off (while module has no power).

−

The device has adhesive tape to securely place the device.

+

+

[[File:FMB230_install2.jpg|center|400px]]

+

==Configuration==

+

===''' Prerequisites:'''===

+

==== Read through [https://wiki.teltonika-gps.com/view/FMC230_First_Start First start guide]====

+

==== Understanding of possible [https://wiki.teltonika-gps.com/view/FMC230_System_settings#Sleep_Mode Sleep modes].====

+

+

===''' Configuring Fleet Maintenance Schedules:'''===

+

[[File:GPRS settings.png|alt=|left|thumb|258x258px]]

+

Parameter ID – Parameter name GPRS settings:

+

−

~~SIM card~~ should be ~~inserted in the module while the connector is plugged off~~ (~~while module has~~ no ~~power~~).

+

*2001 – APN

+

*2002 – APN username (if there are no APN username, empty field should be left)

+

*2003 – APN password (if there are no APN password, empty field should be left)

+

[[File:SERVER settings.png|alt=|left|thumb|259x259px]]

+

+

+

Server settings:

+

*2004 – Domain

+

*2005 – Port

+

*2006 – Data sending protocol (0 – TCP, 1 – UDP)

+

−

~~[[File:FMB230_install2.jpg|center|400px]]~~

−

~~==Configuration==~~

−

~~===~~'''1. ~~Prerequisites:~~'''~~===~~

+

After successful GPRS/SERVER settings configuration, FMC230 device will '''synchronize time''' and '''update records''' to '''the configured server'''. Time intervals and default I/O elements can be changed by using [[Teltonika Configurator]] or [[FMC230 Parameter list|SMS parameters]].

+

+

Possible ignition sources:

+

'''DIN 1''' (Digital Input 1) - if DIN1 is 1 - ignition is ON; if DIN1 value is 0 - ignition is OFF;

+

'''Power Voltage''' - if voltage is between High Voltage Level and Low Voltage Level (below Ignition Settings options) - ignition is ON; if voltage is higher than High Voltage Level or lower than Low Voltage Level - ignition is OFF.

+

'''Engine RPM''' - if RPM from OBD II or CAN is higher than 0 - ignition is ON; if RPM from OBD II or CAN is equal to 0 - ignition is OFF;

+

'''Accelerometer''' - if movement sensor detects movement - ignition is ON; if movement is not detected - ignition is OFF;

+

More than one ignition source can be selected at the same moment. When there are 2 or more sources selected, at least one condition has to be met to change Ignition status.

+

'''DIN 3''' (Digital Input 3) - if DIN3 is 1 - ignition is ON; if DIN3 value is 0 - ignition is OFF;

−

~~====~~1.1. ~~Read through~~ [https://wiki.teltonika-gps.com/view/~~FMC230_First_Start First start guide~~]~~====~~

+

'''Example:''' DIN1 and Accelerometer are selected as the Ignition source. When the device detects movement, Ignition status will change to 1, regardless that DIN1 value is 0. Users can select movement start and movement stop delay time - those parameters are used when the accelerometer is selected as an ignition source. Ignition status is used in power management and the following functionalities: [https://wiki.teltonika-gps.com/view/FMC230_Features_settings#Eco.2FGreen_Drivingreen_Driving Eco/Green Driving], [https://wiki.teltonika-gps.com/view/FMC230_Accelerometer_Features_settings#Excessive_Idling Excessive Idling], Fuel Consumption, [[FMC230_Features_settings#Over_Speeding|Over Speeding]], [https://wiki.teltonika-gps.com/view/FMC230_Accelerometer_Features_settings#Towing_Detection Towing Detection] and [https://wiki.teltonika-gps.com/view/FMC230_Trip/Odometer_settings Trip].

−

~~====1~~.2. ~~Understanding of possible~~ [https://wiki.teltonika-gps.com/view/~~FMC230_System_settings~~#~~Sleep_Mode Sleep modes~~].~~====~~

−

~~==='''2. Configuring Fleet Maintenance Schedules:'''===~~

−

[[File:~~Static_Navigation_Settings~~.~~png~~|left|thumb|~~476x476px~~]]

+

[[File:Ignition settings.gif|left|thumb|440x440px]]

''Parameter ID'' - ''Parameter name''

+

+

Ignition source settings:

+

*101 - Ignition Source (1 - DIN1, 2 - Accelerometer, 3 - Power Voltage, 4 - Engine RPM, 5 - DIN3).

+

104 - Hight Voltage ( MIN - 0, MAX - 30000).

+

105 - Low Voltage ( MIN - 0, MAX - 29999).

+

+

+

+

+

+

[[File:Statnav.png|left|thumb|440x440px]]

Line 40: Line 93:

*106 - Static navigation (0 - Disable, 1 - Enable).

*112 - Static navigation source (1 - Movement, 2 - Ignition, 3 - Movement and Ignition).

−

+

−

~~ ~~

−

Line 48: Line 99:

−

[[File:Jamming.gif|left|thumb|~~476x476px~~]]

+

[[File:Jamming.gif|left|thumb|440x440px]]

Jamming settings:

*11300 - Scenario settings (0 - Disable, 1 - Low priority, 2 - High priority, 3 - Panic priority).

Line 63: Line 114:

−

~~ ~~

−

[[File:Fmb120_unplug.png|left|thumb|~~476x476px~~]]

+

[[File:Fmb120_unplug.png|left|thumb|440x440px]]

Unplug settings:

*11500 - Scenario settings (0 - Disable, 1 - Low priority, 2 - High priority, 3 - Panic priority).

Line 72: Line 123:

*7036 - Send SMS to (Phone number).

*8036 - Sms text (Text).

−

~~ ~~

Line 81: Line 131:

−

[[File:Fmb120_autogeofence.png|left|thumb|~~476x476px~~]]

+

[[File:Fmb120_autogeofence.png|left|thumb|440x440px]]

AutoGeofencing settings:

*20000 - Priority (0 - Disable, 1 - Low priority, 2 - High priority, 3 - Panic priority).

Line 92: Line 142:

*8030 - Sms text (Text).

+

Line 98: Line 149:

−

+

−

~~ ~~

+

−

~~ ~~

−

−

~~ ~~

−

[[File:Immobilizer.gif|left|thumb|~~476x476px~~]]

+

[[File:Immobilizer.gif|left|thumb|440x440px]]

Immobilizer settings:

*11700 - Scenario settings (0 - Disable, 1 - Low priority, 2 - High priority, 3 - Panic priority).

Line 124: Line 172:

'''Quick start:''' From default configuration to Fleet Maintenance Schedules in one [[FMC230 SMS/GPRS Commands|SMS]]:

−

" setparam 106:1;112:3;11300:2;11303:1;11304:2;11305:10;11500:3;11501:1;11502:1;7036:''Telephone Number'';8036:''SMS Text'';20000:3;20002:1;20003:60;20001:0;20005:1;20004:100;7030:''Telephone Number'';8030:''SMS Text'';11700:2;11701:1;11702:1;11703:1;60068:10;

+

" setparam 101:1;106:1;112:2;11300:2;11303:1;11304:2;11305:10;11500:3;11501:1;11502:1;7036:''Telephone Number'';8036:''SMS Text'';20000:3;20002:1;20003:60;20001:0;20005:1;20004:100;7030:''Telephone Number'';8030:''SMS Text'';11700:2;11701:1;11702:1;11703:1;60068:10;

−

~~ ~~

+

'''Note''': Before SMS text, two space symbols should be inserted if no SMS username or password was set in SMS \ Call settings.

Line 132: Line 180:

==Parsing information==

−

==='''1.Prerequisites:'''===

+

===''' Prerequisites:'''===

−

==== ~~1.1.~~ Open [https://wiki.teltonika-gps.com/view/Opening_TCP/UDP_port TCP/UDP port]====

+

==== Open [https://wiki.teltonika-gps.com/view/Opening_TCP/UDP_port TCP/UDP port]====

−

==== ~~1.2.~~ Go to [https://wiki.teltonika-gps.com/view/Java_Parser_First_Start_Guide Java parser first start guide]====

+

==== Go to [https://wiki.teltonika-gps.com/view/Java_Parser_First_Start_Guide Java parser first start guide]====

−

==='''2.Parsing example:'''===

+

===''' Parsing example:'''===

{| class="nd-othertables_2" style="width:100%;"

! rowspan="1" style="width:100%; vertical-align: middle; text-align: center;" |Unparsed received data in hexadecimal stream

Line 147: Line 195:

209c63d05b50008b600074230

−

~~ff430f3d44006b020000601a100003875300002900017738b11f600001f0011505~~

+

ff430f3d44006b020000601a100003875300002900017738b11f600001f0011505

|}

{| class="nd-othertables_2" style="width:100%;"

Line 194: Line 242:

|-

| style="vertical-align: middle; text-align: center;" |N of Total ID

−

| style="vertical-align: middle; text-align: center;" |10

+

| style="vertical-align: middle; text-align: center;" |9

|-

| style="vertical-align: middle; text-align: center;" |N1 of One Byte IO

Line 218: Line 266:

|-

| style="vertical-align: middle; text-align: center;" |4'th IO ID

−

| style="vertical-align: middle; text-align: center;" | AF (AVL ID: 175, Name: Auto Geofence)

+

| style="vertical-align: middle; text-align: center;" | AF (AVL ID: 175, Name: Auto Geofence)

|-

| style="vertical-align: middle; text-align: center;" |4'th IO Value

−

| style="vertical-align: middle; text-align: center;" |00

+

| style="vertical-align: middle; text-align: center;" | 00

|-

| style="vertical-align: middle; text-align: center;" |5'th IO ID

Line 230: Line 278:

|-

| style="vertical-align: middle; text-align: center;" | N2 of Two Byte IO

−

| style="vertical-align: middle; text-align: center;" |04

+

| style="vertical-align: middle; text-align: center;" |03

|-

| style="vertical-align: middle; text-align: center;" |1’st IO ID

Line 238: Line 286:

| style="vertical-align: middle; text-align: center;" |8

|-

−

| style="vertical-align: middle; text-align: center;" |~~2’nd IO Value~~

+

| style="vertical-align: middle; text-align: center;" |2’rd IO ID

−

~~| style="vertical-align: middle; text-align: center;" |61~~

−

|-

−

~~| style="vertical-align: middle; text-align: center;" |3’rd~~ IO ID

| style="vertical-align: middle; text-align: center;" |42 (AVL ID: 66, Name: External Voltage)

|-

−

| style="vertical-align: middle; text-align: center;" |~~3’rd~~ IO Value

+

| style="vertical-align: middle; text-align: center;" |2’rd IO Value

| style="vertical-align: middle; text-align: center;" |30 FC

|-

−

| style="vertical-align: middle; text-align: center;" |4'th IO ID

+

| style="vertical-align: middle; text-align: center;" |3'th IO ID

| style="vertical-align: middle; text-align: center;" |43 (AVL ID: 67,Name: Battery Voltage)

|-

−

| style="vertical-align: middle; text-align: center;" |4'th IO Value

+

| style="vertical-align: middle; text-align: center;" |3'th IO Value

| style="vertical-align: middle; text-align: center;" |0F 3D

−

|-

−

~~| style="vertical-align: middle; text-align: center;" | 5'th IO ID~~

−

~~| style="vertical-align: middle; text-align: center;" |24 (AVL ID: 36, Name: Engine RPM)~~

−

|-

−

~~| style="vertical-align: middle; text-align: center;" |5'th IO Value~~

−

~~| style="vertical-align: middle; text-align: center;" |06 A2~~

|-

| style="vertical-align: middle; text-align: center;" |N4 of Four Byte IO

| style="vertical-align: middle; text-align: center;" |01

|-

−

| style="vertical-align: middle; text-align: center;" |~~1’st IO Value~~

+

| style="vertical-align: middle; text-align: center;" |1’nd IO ID

−

~~| style="vertical-align: middle; text-align: center;" |5E~~

−

|-

−

~~| style="vertical-align: middle; text-align: center;" |2’nd~~ IO ID

| style="vertical-align: middle; text-align: center;" |(AVL ID: 16, Name: Total Odometer)

|-

−

| style="vertical-align: middle; text-align: center;" |~~2’nd~~ IO Value

+

| style="vertical-align: middle; text-align: center;" |1’nd IO Value

| style="vertical-align: middle; text-align: center;" |03 87 53

|-

Line 277: Line 313:

==Demonstration in platform==

−

TAVL: Open TAVL → select client → select Street Map → select device → choose the date from which to which to show the records → push advanced → push show button and then you will see in left down corner all information.

−

~~[[File:Tavl delivery.jpg|left|frameless|1137x1137px]]~~

WIALON: Open WIALON → open messages → push unit ( select your device) → choose the date from which to which to show the records → select message (data messages) → push execute button and you will see all information.

−

[[File:~~Turbo kosmos~~.~~jpg~~|~~left|frameless|1138x1138px~~]]

+

[[File:Monaco1.png|center]]

−

[[Category: Usage scenarios]]

Fomcenko.vi

0

edits

Changes

FISHING BOATS TRACKING WITH IP67 RATING GPS DEVICES (view source)

Revision as of 11:20, 10 March 2023