Difference between revisions of "Command:pulsedigout"
m (Protected "Command:pulsedigout" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
(Created page with "'''Repeatedly''' sets digital outputs <b>ON</b> or <b>OFF</b> for provided timeouts and repeats.<br/> SMS format: <code>pulsedigout XY <on_msX1> <on_msY1> <off_msX2> <off_msY2...") |
(No difference)
|
Revision as of 13:42, 27 March 2023
Repeatedly sets digital outputs ON or OFF for provided timeouts and repeats.
SMS format: pulsedigout XY <on_msX1> <on_msY1> <off_msX2> <off_msY2> <repeatsX3> <repeatsY3>
Set digital output:
Command format:
X - 0, 1 or ? (0 - OFF, 1 - ON, ? - Ignore) starting state for DOUT1.
Y - 0, 1 or ? (0 - OFF, 1 - ON, ? - Ignore) starting state for DOUT2.
X1 - ON timeout for DOUT1 in milliseconds
Y1 - ON timeout for DOUT2 in milliseconds
X2 - OFF timeout for DOUT1 in milliseconds
Y2 - OFF timeout for DOUT2 in milliseconds
X3 - repeats for DOUT1
Y3 - repeats for DOUT2
Note!
- If DOUT is selected to be ignored, then other arguments for that DOUT should be entered as ?
- If on_ms, off_ms or repeats for any of DOUTs will be entered as ?, then value will be set to 1
- For command to take effect for DOUT, X/Y has to be set to opposite value than its current state
In order to blink both DOUTs
Example: pulsedigout 11 2000 3000 1000 2000 2 3
DOUT1 will blink 2 times: on for 2000 ms and off 1000 ms.
DOUT2 will blink 3 times: on for 3000 ms and off for 2000 ms
In order to ignore DOUT control
Example: pulsedigout 1? 2000 ? 1000 ? 2 ?
DOUT1 will blink 2 times: on for 2000 ms and off 1000 ms.
DOUT2 will be ignored
If on_ms, off_ms or repeats are not provided
Example: pulsedigout 11 2000 3000 ? 2000 2 ?
DOUT1 will blink 2 times: on for 2000 ms and off for 1 ms (not really visible if LEDs are used).
DOUT2 will blink 1 time: on for 3000 ms.
Example: pulsedigout 1? 2000 3000 1000 2000 2 3
Will end with error Bad syntax
If entered DOUT state is same as current DOUT state
Example: pulsedigout 11 2000 3000 1000 2000 2 3
Let’s say DOUT1 current state is 0 and DOUT2 is 1.
DOUT1 will blink 2 times: on for 2000 ms and off 1000 ms.
DOUT2 control will be ignored.
Note! Provided examples are for devices with 2 DOUTs. For other devices arguments count should correspond to device DOUTs count.