Changes

<b>{{{description|Leading GNSS/GSM/Bluetooth Terminal for advanced applications}}}</b>

<b>{{{description|Leading LTE/GNSS/BLE Terminal for advanced applications}}}</b>

{{{pic|[[Image:Fmb640.png|400px|right]]}}}

{{{pic|[[Image:FMB640_600X600_1.png|400px|right]]}}}

=='''How to insert SIM card'''==

=='''How to insert SIM card {{{battery|and connect the battery}}}'''==

#Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.

# '''Unscrew''' 4 screws counterclockwise that are located on the '''bottom''' of the device.

#Insert '''SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB640 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that SIM card '''cut-off corner''' is not pointing forward to slot. {{{dual_sim|SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.}}}

# Remove the '''cover'''.

#Attach device '''cover''' and put the '''screws''' from the package into the holes.

# Insert '''SIM''' card as shown with '''PIN request disabled''' or read '''[[{{{model|FMB640}}} Security info|Security info]]''' how to enter it later in [[Teltonika Configurator]]. Make sure that SIM card '''cut-off corner''' is pointing outwards. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}}

#'''Screw''' all 4 screws.

{{{be_battery|# Connect '''battery''' as shown to device.}}}

#Device is ready to be connected.

# After '''configuration''', see “'''[[{{{model|FMB640}}}_First_Start#PC Connection (Windows)|PC Connection (Windows)]]'''”, attach device '''cover''' back.

# '''Screw''' in all screws. Device is ready to be mounted.

[[Image:1_fmb640_SIM.png|330px]][[Image:2_fmb640_SIM.png|330px]]

[[Image:{{{sim_insert_pic1|{{{model|Fmb640}}}-cover-1.png}}}|260px]][[Image:{{{sim_insert_pic2|{{{model|Fmb640}}}-cover-2.png}}}|260px]][[Image:{{{sim_insert_pic3|{{{model|Fmb640}}}-cover-3.png}}}|260px]][[Image:{{{sim_insert_pic4|{{{model|Fmb640}}}-cover-4.png}}}|260px]][[Image:{{{sim_insert_pic4|{{{model|Fmb640}}}-cover-5.png}}}|260px]][[Image:{{{sim_insert_pic4|{{{model|Fmb640}}}-cover-6.png}}}|260px]]

[[Image:3_fmb640_SIM.png|330px]][[Image:4_fmb640_SIM.png|330px]][[Image:FMB640 sim insert-6.png|330px]]

[[File:Alert.png|left|link=]] <br> <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b><br>

|[[File:Alert.png|left|link=]]||<b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>

=='''How to insert microSD card'''==

1) If possible - ask operator for Standard SIM card with solid construction (not pre-cut to 3 parts) <br>

3) If you plan to use only one SIM card - insert it into SIM1 slot (lower slot) - this ensures greater pressure on SIM contacts as the contact bed is pushed by PCB.<br>

#Push microSD card lock case.

#Open microSD card locker.

#Correctly insert microSD card into slot.

#Close microSD card locker.

# Push microSD card lock case.

#Push microSD card lock case to locked position.

# Open microSD card locker.

 

# Correctly insert microSD card into slot.

# Close microSD card locker.

# Push microSD card lock case to locked position.