Difference between revisions of "EYE FUNCTIONALITIES"

From Wiki Knowledge Base | Teltonika GPS
(44 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
__TOC__
 
__TOC__
−
=== Page Description ===
+
=== Description ===
  
−
This page will describe EYE device functionalities, their value flow and required hardware, firmware and software versions.  
+
This page will describe EYE device functionalities, their flow and functionality supporting software versions.
  
−
==EYE APP 1.2.2-89==
+
==== Functionalities: ====
−
===Search device with QR scan===
 
−
'''Functionality''': Now you can find devices with QR scan by pressing scan button [[File:EYE_APP_QR_BUTTON.png|frameless|25x25px]] and scanning device QR code.
 
  
−
'''Firmware''': 1.2.1.R.0+
+
===== Connecting to the device =====
 +
{| class="nd-othertables_2" style="width:100%;"
 +
|+
 +
!SW version requirements
 +
! colspan="5" | EYE APP: 1.2.0-60+
 +
Firmware: 1.2.1.R.0 to 1.2.8.R.2
 +
|-
 +
|Step No.
 +
|1
 +
|2
 +
|3
 +
|
 +
|
 +
|-
 +
| Short step desc.
 +
|Tap the selected device to connect to it
 +
|Enter PIN
 +
|Connected
 +
|
 +
|
 +
|-
 +
|Successful attempt at functionality visual
 +
|[[File:TapToConnect.png|alt=|left]]
 +
|[[File:PIN_Code.png|alt=|left]]
 +
|[[File:Overview_-_with_an_update_(beacon).png|alt=|left]]
 +
|
 +
|
 +
|-
 +
|Short step desc.
 +
|Tap the selected device to connect to it
 +
|Enter PIN incorrectly
 +
|Fail to enter PIN correctly 4 more times
 +
| Wait for 5 min timeout and enter PIN incorrectly
 +
|Fail to enter PIN correctly 4 more times
 +
|-
 +
|Additional desc.
 +
|
 +
|
 +
|Device is locked for 5 min but will allow to connect with PIN again after timeout
 +
|
 +
|Device is locked for 5 min but will allow to connect with PIN again after timeout, thus this is continued in infinite loop.
 +
|-
 +
| Failed attempt at functionality visual
 +
|[[File:TapToConnect.png|alt=|left]]
 +
|[[File:PIN Code (error).png|File:PIN_Code_(error).png|alt=|left]]
 +
|[[File:Device blocked.png|alt=Device blocked|alt=|left]]
 +
|[[File:PIN Code (error).png|File:PIN_Code_(error).png|alt=|left]]
 +
|[[File:Device blocked.png|alt=Device blocked|alt=|left]]
 +
|}
  
−
'''Value''': Easier device management
 
  
−
'''Flow:''' 1. Tap [[File:EYE_APP_QR_BUTTON.png|frameless|25x25px]] 2. scan the QR code engraved onto EYE device <br><br>[[File:EYE_APP_QR_PRESS_BUTTON.png|frameless|250px]][[File:EYE_APP_QR_SCAN.png|frameless|250px]][[File:EYE_APP_QR_SCAN_EXAMPLE.png|frameless|250px]]
 
  
−
===Customized Sensor Selection===
 
−
'''Functionality''': Users can disable sensors reading  leaving only the sensors they require.
 
  
−
'''Firmware''': 1.2.10.R.4+
 
  
−
'''Value''': Data saving, battery life can be expanded by disabling accelerometer.
 
  
−
'''Flow:''' 1. Connect to EYE device  2. Click "configure"  3. Expand Active sensors tab 4. Uncheck sensors you want to deactivate 4. Save your configuration.<br><br>[[File:EYE_APP_CHOOSE_ONE_SENSORS.png|frameless|250px]][[File:EYE_APP_ONE_SENSOR_VIEW.png|frameless|250px]][[File:EYE_APP_CHOOSE_FOUR_SENSORS.png|frameless|250px]][[File:EYE_APP_FOUR_SENSOR_VIEW.png|frameless|250px]]
+
{| class="nd-othertables_2" style="width:100%;"
 +
!SW version requirements
 +
! colspan="5" | EYE APP: 1.2.0-60+
 +
Firmware: 1.2.9.R.8+
 +
|-
 +
|Short step desc.
 +
|Tap the selected device to connect to it
 +
| Enter PIN incorrectly
 +
|Fail to enter PIN correctly 4 more times
 +
|Wait for 5 min timeout and enter PIN incorrectly
 +
|Fail to enter PIN correctly 4 more times
 +
|-
 +
|Additional desc.
 +
|
 +
|
 +
|Device is locked for 5 min but will allow to connect with PIN again after timeout
 +
|
 +
|Device is locked with PUK code now and will remain so until correct PUK is entered, see PUK code unlock.
 +
|-
 +
|Failed attempt at functionality visual
 +
|[[File:TapToConnect.png|alt=|left]]
 +
|[[File:PIN Code (error).png|File:PIN_Code_(error).png|alt=|left]]
 +
|[[File:Device blocked.png|alt=Device blocked|alt=|left]]
 +
|[[File:PIN Code (error).png|File:PIN_Code_(error).png|alt=|left]]
 +
|[[File:Device blocked (PUK).png|alt=Device blocked|alt=|left]]
 +
|}
  
−
===Auto-Disconnect Timer===
+
===== PUK code unlock: =====
−
'''Functionality''': After 2 minutes of inactivity, users will be automatically disconnected from the device. Before disconnection, you will have the option to maintain the connection.
+
{| class="nd-othertables_2" style="width:60%;"
−
 
+
!SW version requirements
−
'''Firmware''': 1.2.10.R.4+
+
! colspan="5" | EYE APP: 1.2.0-60+
−
 
+
Firmware: 1.2.9.R.8+
−
'''Value''': Enhanced privacy and energy saving.
+
|-
−
 
+
|Step No.
−
'''Flow:''' 1. Connect to EYE device  2.  Do not perform any saving actions for 2 minutes.<br><br>[[File:EYE_APP_TWO_MINUTE_WAIT.png|frameless|250px]][[File:EYE_APP_DISCONNECTED_AFTER_TWO_MINUTES.png|frameless|250px]][[File:EYE_APP_DISCONNECTED_WHILE_CONFIGURING.png|frameless|250px]]
+
|1
−
 
+
|2
−
===Battery voltage display===
+
|3
−
'''Functionality''': Eye App now provides a clear and convenient readout of the battery's voltage level, keeping users informed about their device's power status.
+
|-
−
 
+
|Short step desc.
−
'''Firmware''': 1.2.1.R.0+
+
|Tap the blocked device to connect to it
−
 
+
|Enter PUK
−
'''Value''': Keeping users informed about their device's power status.
+
|Connected
−
 
+
|-
−
'''Flow:''' 1. Expand sensor card in the overview screen or connect to the device<br><br>[[File:EYE_APP_VISIBLE_BATTERY_VOLTAGE.png|frameless|250px]]
+
|Additional desc.
−
 
+
|
−
===12 characters name===
+
|
−
'''Functionality''': Users can now assign names of up to 12 characters,
+
|PIN automatically resets to default
−
 
+
|-
−
'''Firmware''': 1.2.1.R.0+
+
|Successful attempt at functionality visual
−
 
+
|
−
'''Value''':  A full MAC address can be used as the name.
+
[[File:TapToConnect.png|alt=|left]]
−
 
+
|[[File:PUK Code.png|<nowiki>File:PUK Code.png]</nowiki>|alt=|left]]
−
'''Flow:''' 1. Connect to EYE device  2. Click "configure"  3. Expand Name settings drop down 4. Enter desired name  4. Save your configuration.<br>[[File:EYE APP 12 CHAR NAME.png|frameless|250px]]
+
|[[File:Connected PIN reset.png|alt=|left]]
−
 
+
|-
−
==<big>EYE APP 1.2.0-63</big>==
+
|Step desc.
−
 
+
|Tap the selected device to connect to it
−
===PIN code===
+
|Enter PUK incorrectly
−
'''Functionality''': Eye App will time-out users on for 5 minutes after 5 unsuccessful PIN attempts
+
| Fail to enter PIN correctly 4 more times
−
 
+
|-
−
'''Firmware''': 1.2.1.R.0 to 1.2.8.R.2
+
|Additional desc.
−
 
+
|
−
'''Value''': Enhanced privacy
+
|PUK is rejected and you can only go back or enter correct PUK
−
 
+
|
−
'''Flow:''' 1. Tap the selected device to connect to it 2. Enter PIN incorrectly, fail to enter PIN correctly 4 more times 3. Wait 5 minutes for timeout to end.
+
|-
−
 
+
|Failed attempt at functionality visual
−
[[File:Screenshot 20230503 165303 EYE APP edited.jpg|frameless|250px]][[File:Screenshot 20230509 1518232 EYE APP.jpg|frameless|250px]][[File:Screenshot 20230509 152802 EYE APP.jpg|frameless|250px]]
+
|[[File:TapToConnect.png|alt=|left]]
−
 
+
|[[File:PUK Code (error).png|File:PUK Code (error).png|alt=|left]]
−
===PUK code ===
+
|
−
'''Functionality''': Eye App will block users that fail PIN 10 times.
+
|}
−
 
 
−
'''Firmware''': 1.2.9.R.8+
 
−
 
 
−
'''Value''': Enhanced privacy
 
−
 
 
−
'''Lock flow:''' 1. Tap the selected device to connect to it 2. Enter PIN incorrectly, fail to enter PIN correctly 4 more times 3. Wait 5 minutes for timeout to end. 4. Tap the selected device to connect to it 5. Enter PIN incorrectly, fail to enter PIN correctly 4 more times. 6. Requirement to enter PUK code will now appear. PUK code is provided by support.
 
−
 
 
−
[[File:Screenshot 20230503 165303 EYE APP edited.jpg|frameless|200px]][[File:Screenshot 20230509 1518232 EYE APP.jpg|frameless|200px]][[File:Screenshot 20230509 152802 EYE APP.jpg|frameless|200px]][[File:Screenshot 20230509 151823 EYE APP.jpg|frameless|200px]][[File:Screenshot 20230509 175501 EYE APP PinnAttemptAfter5min.jpg|frameless|200px]]
 
−
 
 
−
'''Unlock flow:''' 1. Tap the blocked device to connect to it 2. Enter PUK correctly 3. You will be connected, PIN will be reset to default
 
−
 
 
−
[[File:Screenshot 20230503 165303 EYE APP edited.jpg|frameless|200px]][[File:Device screen 1.2.8 2.jpg|frameless|200px]]
 
−
[[File:PUK insert.jpg|frameless|200px]]
 
−
 
 
−
===Hibernate mode:===
 
−
'''Functionality''': Eye App will allow users to send their devices back to hibernate mode
 
−
 
 
−
'''Firmware''': 1.2.9.R.8+
 
−
 
 
−
Hardware: BTSID1 hibernate version or any BTSMP1
 
−
 
 
−
'''Value''': Battery saving
 
−
 
 
−
'''Wake up flow:''' 1. Take magnet 2. Attach magnet to hibernating device 3. Wait for LED to blink.
 
−
 
 
−
[[File:520746_Magnet_EYE_gif_v1.6-min.gif|alt=|left|240x240px|link=https://wiki.teltonika-gps.com/view/File:520746_Magnet_EYE_gif_v1.6-min.gif]]<br>
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
'''Send to hibernate flow:''' 1. While connected and in overview tap "Send device to sleep". 2. Confirm your selection 3. Wait for EYE App to disconnect:
 
−
 
 
−
[[File:Device screen 1.2.8 2.jpg|400x400px]][[File:Screenshot 20230509 173323 EYE APP.jpg|400x400px]][[File:Screenshot 20230512 164509 Gallery.jpg|400x400px]]
 

Revision as of 13:39, 17 April 2023

Description

This page will describe EYE device functionalities, their flow and functionality supporting software versions.

Functionalities:

Connecting to the device
SW version requirements EYE APP: 1.2.0-60+

Firmware: 1.2.1.R.0 to 1.2.8.R.2

Step No. 1 2 3
Short step desc. Tap the selected device to connect to it Enter PIN Connected
Successful attempt at functionality visual
Short step desc. Tap the selected device to connect to it Enter PIN incorrectly Fail to enter PIN correctly 4 more times Wait for 5 min timeout and enter PIN incorrectly Fail to enter PIN correctly 4 more times
Additional desc. Device is locked for 5 min but will allow to connect with PIN again after timeout Device is locked for 5 min but will allow to connect with PIN again after timeout, thus this is continued in infinite loop.
Failed attempt at functionality visual




SW version requirements EYE APP: 1.2.0-60+

Firmware: 1.2.9.R.8+

Short step desc. Tap the selected device to connect to it Enter PIN incorrectly Fail to enter PIN correctly 4 more times Wait for 5 min timeout and enter PIN incorrectly Fail to enter PIN correctly 4 more times
Additional desc. Device is locked for 5 min but will allow to connect with PIN again after timeout Device is locked with PUK code now and will remain so until correct PUK is entered, see PUK code unlock.
Failed attempt at functionality visual
PUK code unlock:
SW version requirements EYE APP: 1.2.0-60+

Firmware: 1.2.9.R.8+

Step No. 1 2 3
Short step desc. Tap the blocked device to connect to it Enter PUK Connected
Additional desc. PIN automatically resets to default
Successful attempt at functionality visual
Step desc. Tap the selected device to connect to it Enter PUK incorrectly Fail to enter PIN correctly 4 more times
Additional desc. PUK is rejected and you can only go back or enter correct PUK
Failed attempt at functionality visual
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=EYE_FUNCTIONALITIES&oldid=84762"