First time with flespi platform: Difference between revisions

(2 intermediate revisions by the same user not shown)

Line 1:

==Introduction==

[[Image:Flespi.png|300px|frame]]

Many clients who own a Teltonika device ask how to create a server to send data to. To get you a quick start, we present you a tutorial with the most important steps that have to be taken, when setting up your device to send data to the server – flespi platform!

Many clients who own a Teltonika device ask how to create a server to send data to. To get you a quick start, we present you a tutorial with the most important steps that have to be taken, when setting up your device to send data to the server – flespi platform!

~~ ~~

==First time with flespi==

1. Go to [https://flespi.io/ flespi.io]

1. Go to [https://flespi.io/ flespi.io] 2. Click on Login/Register button 3. Click on one of the icons to register with

2. Click on Login/Register button

3. Click on one of the icons to register with

In the example, registering is done as shown in the picture:

Line 28:

Line 27:

==How to add a device==

1. Click on Telematics Hub to expand the panel

1. Click on Telematics Hub to expand the panel 2. Click Devices tab 3. To add a device, click '+' button, which is at the bottom right corner of the screen 4. After '+' clicking button, a Device tab appears in which you have to fill the fields

2. Click Devices tab

3. To add a device, click '+' button, which is at the bottom right corner of the screen

4. After '+' clicking button, a Device tab appears in which you have to fill the fields

[[Image:Device_add.png|1000px|frame|center]]

Line 41:

Line 37:

==How to create a channel==

1. Click on Telematics Hub to expand the panel

1. Click on Telematics Hub to expand the panel 2. Click Channels tab 3. To add a channel, click '+' button, which is at the bottom right corner of the screen 4. After '+' clicking button, a Channel tab appears in which you have to fill the following fields

2. Click Channels tab

3. To add a channel, click '+' button, which is at the bottom right corner of the screen

4. After '+' clicking button, a Channel tab appears in which you have to fill the following fields

[[Image:Example_Channel_add.png|1000px|frame|center]]

5. Once the saving is done, a channel is created. In example below, a channel named TELTONIKA_TEST is created

5. Once the saving is done, a channel is created. In example below, a channel named TELTONIKA_TEST is created

[[Image:Channel_domain-port.png|1000px|frame|center]]

==How to connect a device to created channel==

In instructions [[First_time_with_flespi_platform#How_to_create_a_Channel| 'How to create a channel']] a channel has been created with channel IP Address/Domain and Port numbers. To connect to that

channel, the device must be configured. IP Address/Domain and Port numbers are shown in image below.

channel, the device must be configured. IP Address/Domain and Port numbers are shown in image below.

[[Image:Channel_domain-port.png|1000px|frame|center]]

Line 63:

Line 54:

1. Press GPRS tab

* ''GPRS Context'' field requires you to enter your SIM providers' APN settings. Make sure to fill this in based on the SIM provider you are using with your Teltonika device.

More information about ''GPRS'' panel and it's parameters for each device can be found ~~here~~:

More information about ''GPRS'' panel and it's parameters for each device can be found on your device's GPRS settings wiki page. For example:

[[TST100 GPRS settings|TST100]] | [[TFT100 GPRS settings|TFT100]] | [[GH5200 GPRS settings|GH5200]] | [[TMT250 GPRS settings|TMT250]]

[[TST100 GPRS settings|TST100]] | [[TFT100 GPRS settings|TFT100]] | [[GH5200 GPRS settings|GH5200]] | [[TMT250 GPRS settings|TMT250]] | [[FMB920 GPRS settings|FMB920]] | [[FMC125 GPRS settings|FMC125]]

|}

Line 81:

Line 72:

* Send Period – Send records to the server every 30 seconds.

More information about ''Data acquisition'' panel for each device can be found ~~here~~:

More information about ''Data acquisition'' panel for each device can be found on your device's GPRS settings wiki page. For example:

[[TST100_Data_acquisition_settings|TST100]] | [[TFT100_Data_acquisition_settings|TFT100]] | [[GH5200_Data_acquisition_settings|GH5200]] | [[TMT250_Data_acquisition_settings|TMT250]]

[[TST100_Data_acquisition_settings|TST100]] | [[TFT100_Data_acquisition_settings|TFT100]] | [[GH5200_Data_acquisition_settings|GH5200]] | [[TMT250_Data_acquisition_settings|TMT250]] | [[FMB920_Data_acquisition_settings|FMB920]] | [[FMC125_Data_acquisition_settings|FMC125]]

~~ ~~

[[Image:Data_acquisition_flespi.png|1000px|frame|center]]

Line 99:

Line 88:

<div style="text-align: center;">We recommend to use the latest version of the firmware. Contact your sales manager to get Teltonika Drive link and download the latest version.</div>

1. Go to [https://flespi.io/ flespi.io] platform

1. Go to [https://flespi.io/ flespi.io] platform 2. Login and select Channels panel 3. Tap on a channel 4. When selected, a channel window appears. Click on TOOLBOX 5. When TOOLBOX is opened, a new screen appears, where records from the device sent to the channel can be seen 6. Click on icon, which is at the bottom right side as shown in the picture below

2. Login and select Channels panel

3. Tap on a channel

[[Image:Server_icons.png|1000px|frame|center]]

4. When selected, a channel window appears. Click on TOOLBOX

5. When TOOLBOX is opened, a new screen appears, where records from the device sent to the channel can be seen

6. Click on icon, which is at the bottom right side as shown in the picture below

~~[[Image:Server_icons.png|1000px|frame|center]] ~~

7. In the search field, search for these parameters:

Line 116:

Line 101:

8. If everything is done correctly, at the bottom, three new recently added columns are visible

[[Image:New_columns_flespi.png|1000px|frame|center]]~~ ~~

[[Image:New_columns_flespi.png|1000px|frame|center]]

9. Now unplug the devices and test proximity feature. When proximity event happens, the device sends data to the flespi platform.

[[Image:Proximity_flespi_violation.png|1000px|frame|center]]~~ ~~

[[Image:Proximity_flespi_violation.png|1000px|frame|center]]

<div style="text-align: center;">Information about parameters:</div>

Line 140:

Line 126:

* To find out about ManDown feature visit: [[GH5200_Features_settings#ManDown|GH5200]] | [[TMT250_Features_settings#ManDown|TMT250]]

* To learn how to configure a ManDown feature visit: [[How_to_configure_ManDown_scenario|ManDown scenario]]

1. Go to [https://flespi.io/ flespi.io] platform

1. Go to [https://flespi.io/ flespi.io] platform 2. Login and select Channels panel 3. Tap on a channel 4. When selected, a channel window appears. Click on TOOLBOX 5. When TOOLBOX is opened, a new screen appears, where records from the device sent to the channel can be seen 6. Click on icon, which is at the bottom right side as shown in the picture below

2. Login and select Channels panel

3. Tap on a channel

[[Image:Server_icons.png|1000px|frame|center]]

4. When selected, a channel window appears. Click on TOOLBOX

5. When TOOLBOX is opened, a new screen appears, where records from the device sent to the channel can be seen

6. Click on icon, which is at the bottom right side as shown in the picture below

~~[[Image~~:~~Server_icons~~.~~png|1000px|frame|center]]~~

7. In the search field, search for mandown.alarm.status parameter Click on the eye button to add a column 8. If everything is done correctly, at the bottom, a new recently added column is visible: mandown.alarm.status

~~7. In the search field, search for mandown.alarm.status parameter ~~

[[Image:ManDown_flespi.png|1000px|frame|center]]

~~Click on the eye button to add a column ~~

~~8. If everything is done correctly, at the bottom, a new recently added column is visible~~: ~~mandown.alarm~~.~~status~~

~~[[Image:ManDown_flespi.png|1000px|frame|center]] ~~

9. When a ManDown event happens, the device sends a record to flespi platform~~~~

9. When a ManDown event happens, the device sends a record to flespi platform

[[Image:Mandown_flespi_true.png|1000px|frame|center]]

Line 166:

Line 147:

To learn how to configure in door tracking using BLE advertising Beacons visit: [[How to read data from BLE Beacons]]

1. Go to [https://flespi.io/ flespi.io] platform

1. Go to [https://flespi.io/ flespi.io] platform 2. Login and select Channels panel 3. Tap on a channel 4. When selected, a channel window appears. Click on TOOLBOX 5. When TOOLBOX is opened, a new screen appears, where records from the device sent to the channel can be seen 6. Click on icon, which is at the bottom right side as shown in the picture below

2. Login and select Channels panel

3. Tap on a channel

[[Image:Server_icons.png|1000px|frame|center]]

4. When selected, a channel window appears. Click on TOOLBOX

5. When TOOLBOX is opened, a new screen appears, where records from the device sent to the channel can be seen

6. Click on icon, which is at the bottom right side as shown in the picture below

~~[[Image:Server_icons.png|1000px|frame|center]] ~~

7. In the search field, search for ble.beacons parameter

7. In the search field, search for ble.beacons parameter Click on the eye button to add a column

Click on the eye button to add a column

[[Image:BLE_BEACONS_FLESPI.png|1000px|frame|center]]

~~[[Image:BLE_BEACONS_FLESPI.png|1000px|frame|center]] ~~

8. If everything is done correctly, at the bottom, a new recently added column is visible: ble.beacons

[[Image:Blebeacons_column.png|1000px|frame|center]]~~ ~~

[[Image:Blebeacons_column.png|1000px|frame|center]]

9. Beacon data is sent to flespi platform, where beacon UUID can be seen and its radio signal strength

[[Image:Ble_beacon_packet.png|1000px|frame|center]]~~ ~~

[[Image:Ble_beacon_packet.png|1000px|frame|center]]

[[Category: Fleet Management ~~platforms~~]]

[[Category: Flespi with Fleet Management (FM)]]

@@ Line 1: / Line 1: @@
 ==Introduction==
 [[Image:Flespi.png|300px|frame]]
-Many clients who own a Teltonika device ask how to create a server to send data to. To get you a quick start, we present you a tutorial with the most important steps that have to be taken, when setting up your device to send data to the server – flespi platform!
+Many clients who own a Teltonika device ask how to create a server to send data to. To get you a quick start, we present you a tutorial with the most important steps that have to be taken, when setting up your device to send data to the server – flespi platform!<br>
-<br><br><br><br><br><br>
 ==First time with flespi==
-<b>1.</b> Go to [https://flespi.io/ flespi.io]<br>
+<b>1.</b> Go to [https://flespi.io/ flespi.io]<br><b>2.</b> Click on <b>Login/Register</b> button<br><b>3.</b> Click on one of the icons to register with<br>
-<b>2.</b> Click on <b>Login/Register</b> button<br>
-<b>3.</b> Click on one of the icons to register with<br>
 <i>In the example, registering is done as shown in the picture:</i>
@@ Line 28: / Line 27: @@
 ==How to add a device==
-<b>1.</b> Click on <b>Telematics Hub</b> to expand the panel<br>
+<b>1.</b> Click on <b>Telematics Hub</b> to expand the panel<br><b>2.</b> Click <b>Devices tab</b><br><b>3.</b> To add a device, click '<b>+</b>' button, which is at the bottom right corner of the screen<br><b>4.</b> After '<b>+</b>' clicking button, a Device tab appears in which you have to fill the fields<br>
-<b>2.</b> Click <b>Devices tab</b><br>
-<b>3.</b> To add a device, click '<b>+</b>' button, which is at the bottom right corner of the screen<br>
-<b>4.</b> After '<b>+</b>' clicking button, a Device tab appears in which you have to fill the fields<br>
 [[Image:Device_add.png|1000px|frame|center]]<br>
@@ Line 41: / Line 37: @@
 ==How to create a channel==
-<b>1.</b> Click on <b>Telematics Hub</b> to expand the panel<br>
+<b>1.</b> Click on <b>Telematics Hub</b> to expand the panel<br><b>2.</b> Click <b>Channels tab</b><br><b>3.</b> To add a channel, click '<b>+</b>' button, which is at the bottom right corner of the screen<br><b>4.</b> After '<b>+</b>' clicking button, a Channel tab appears in which you have to fill the following fields<br>
-<b>2.</b> Click <b>Channels tab</b><br>
-<b>3.</b> To add a channel, click '<b>+</b>' button, which is at the bottom right corner of the screen<br>
-<b>4.</b> After '<b>+</b>' clicking button, a Channel tab appears in which you have to fill the following fields<br>
 [[Image:Example_Channel_add.png|1000px|frame|center]]<br>
-<b>5.</b> Once the saving is done, a channel is created. In example below, a channel named TELTONIKA_TEST is created<br>
+<b>5.</b> Once the saving is done, a channel is created. In example below, a channel named TELTONIKA_TEST is created<br><br>
-<br>
 [[Image:Channel_domain-port.png|1000px|frame|center]]<br>
 ==How to connect a device to created channel==
 In instructions [[First_time_with_flespi_platform#How_to_create_a_Channel| <i>'How to create a channel'</i>]] a channel has been created with channel <b>IP Address/Domain and Port</b> numbers. To connect to that
-channel, the device must be configured. <b>IP Address/Domain and Port</b> numbers are shown in image below.<br>
+channel, the device must be configured. <b>IP Address/Domain and Port</b> numbers are shown in image below.<br><br>
-<br>
 [[Image:Channel_domain-port.png|1000px|frame|center]]<br>
@@ Line 63: / Line 54: @@
 <b>1.</b> Press <b>GPRS</b> tab<br>
 * <b>''GPRS Context'' field requires you to enter your SIM providers' APN settings. Make sure to fill this in based on the SIM provider you are using with your Teltonika device.</b>
-More information about ''GPRS'' panel and it's parameters for each device can be found here:
+More information about ''GPRS'' panel and it's parameters for each device can be found on your device's GPRS settings wiki page. For example:
-[[TST100 GPRS settings|TST100]] | [[TFT100 GPRS settings|TFT100]] | [[GH5200 GPRS settings|GH5200]] | [[TMT250 GPRS settings|TMT250]]
+[[TST100 GPRS settings|TST100]] | [[TFT100 GPRS settings|TFT100]] | [[GH5200 GPRS settings|GH5200]] | [[TMT250 GPRS settings|TMT250]] | [[FMB920 GPRS settings|FMB920]] | [[FMC125 GPRS settings|FMC125]]
 |}
@@ Line 81: / Line 72: @@
 * <i>Send Period</i> – Send records to the server every 30 seconds.<br>
-More information about ''Data acquisition'' panel for each device can be found here:
+More information about ''Data acquisition'' panel for each device can be found on your device's GPRS settings wiki page. For example:
-[[TST100_Data_acquisition_settings|TST100]] | [[TFT100_Data_acquisition_settings|TFT100]] | [[GH5200_Data_acquisition_settings|GH5200]] | [[TMT250_Data_acquisition_settings|TMT250]]
+[[TST100_Data_acquisition_settings|TST100]] | [[TFT100_Data_acquisition_settings|TFT100]] | [[GH5200_Data_acquisition_settings|GH5200]] | [[TMT250_Data_acquisition_settings|TMT250]] | [[FMB920_Data_acquisition_settings|FMB920]] | [[FMC125_Data_acquisition_settings|FMC125]]
-<br>
 [[Image:Data_acquisition_flespi.png|1000px|frame|center]]<br>
@@ Line 99: / Line 88: @@
 <div style="text-align: center;"><b>We recommend to use the latest version of the firmware. Contact your sales manager to get Teltonika Drive link and download the latest version.</b></div><br>
-<b>1.</b> Go to [https://flespi.io/ flespi.io] platform<br>
+<b>1.</b> Go to [https://flespi.io/ flespi.io] platform<br><b>2.</b> Login and select <b>Channels</b> panel<br><b>3.</b> Tap on a <b>channel</b><br><b>4.</b> When selected, a channel window appears. Click on <b>TOOLBOX</b></b><br><b>5.</b> When <b>TOOLBOX</b></b> is opened, a new screen appears, where records from the device sent to the channel can be seen<br><b>6.</b> Click on icon, which is at the bottom right side as shown in the picture below<br>
-<b>2.</b> Login and select <b>Channels</b> panel<br>
-<b>3.</b> Tap on a <b>channel</b><br>
+[[Image:Server_icons.png|1000px|frame|center]]
-<b>4.</b> When selected, a channel window appears. Click on <b>TOOLBOX</b></b><br>
-<b>5.</b> When <b>TOOLBOX</b></b> is opened, a new screen appears, where records from the device sent to the channel can be seen<br>
-<b>6.</b> Click on icon, which is at the bottom right side as shown in the picture below<br>
-[[Image:Server_icons.png|1000px|frame|center]]<br>
 <b>7.</b> In the search field, search for these parameters:<br>
@@ Line 116: / Line 101: @@
 <b>8.</b> If everything is done correctly, at the bottom, three new recently added columns are visible<br>
-[[Image:New_columns_flespi.png|1000px|frame|center]]<br>
+[[Image:New_columns_flespi.png|1000px|frame|center]]
 <b>9.</b> Now unplug the devices and test proximity feature. When proximity event happens, the device sends data to the flespi platform.<br>
-[[Image:Proximity_flespi_violation.png|1000px|frame|center]]<br>
+[[Image:Proximity_flespi_violation.png|1000px|frame|center]]
 <div style="text-align: center;"><b>Information about parameters:</b></div>
@@ Line 140: / Line 126: @@
 * <b>To find out about ManDown feature visit:</b> [[GH5200_Features_settings#ManDown|GH5200]] | [[TMT250_Features_settings#ManDown|TMT250]]
 * <b>To learn how to configure a ManDown feature visit:</b> [[How_to_configure_ManDown_scenario|ManDown scenario]]<br>
-<b>1.</b> Go to [https://flespi.io/ flespi.io] platform<br>
+<b>1.</b> Go to [https://flespi.io/ flespi.io] platform<br><b>2.</b> Login and select <b>Channels</b> panel<br><b>3.</b> Tap on a <b>channel</b><br><b>4.</b> When selected, a channel window appears. Click on <b>TOOLBOX</b></b><br><b>5.</b> When <b>TOOLBOX</b></b> is opened, a new screen appears, where records from the device sent to the channel can be seen<br><b>6.</b> Click on icon, which is at the bottom right side as shown in the picture below<br>
-<b>2.</b> Login and select <b>Channels</b> panel<br>
-<b>3.</b> Tap on a <b>channel</b><br>
+[[Image:Server_icons.png|1000px|frame|center]]
-<b>4.</b> When selected, a channel window appears. Click on <b>TOOLBOX</b></b><br>
-<b>5.</b> When <b>TOOLBOX</b></b> is opened, a new screen appears, where records from the device sent to the channel can be seen<br>
-<b>6.</b> Click on icon, which is at the bottom right side as shown in the picture below<br>
-[[Image:Server_icons.png|1000px|frame|center]]<br>
+<b>7.</b> In the search field, search for <b>mandown.alarm.status</b> parameter<br><b>Click on the eye button to add a column</b><br><b>8.</b> If everything is done correctly, at the bottom, a new recently added column is visible: <b>mandown.alarm.status</b>
-<b>7.</b> In the search field, search for <b>mandown.alarm.status</b> parameter<br>
+[[Image:ManDown_flespi.png|1000px|frame|center]]
-<b>Click on the eye button to add a column</b><br>
-<b>8.</b> If everything is done correctly, at the bottom, a new recently added column is visible: <b>mandown.alarm.status</b>
-[[Image:ManDown_flespi.png|1000px|frame|center]]<br>
-<b>9.</b> When a ManDown event happens, the device sends a record to flespi platform</b><br>
+<b>9.</b> When a ManDown event happens, the device sends a record to flespi platform<br>
 [[Image:Mandown_flespi_true.png|1000px|frame|center]]<br>
@@ Line 166: / Line 147: @@
 <b>To learn how to configure in door tracking using BLE advertising Beacons visit:</b> [[How to read data from BLE Beacons]]
-<b>1.</b> Go to [https://flespi.io/ flespi.io] platform<br>
+<b>1.</b> Go to [https://flespi.io/ flespi.io] platform<br><b>2.</b> Login and select <b>Channels</b> panel<br><b>3.</b> Tap on a <b>channel</b><br><b>4.</b> When selected, a channel window appears. Click on <b>TOOLBOX</b></b><br><b>5.</b> When <b>TOOLBOX</b></b> is opened, a new screen appears, where records from the device sent to the channel can be seen<br><b>6.</b> Click on icon, which is at the bottom right side as shown in the picture below<br>
-<b>2.</b> Login and select <b>Channels</b> panel<br>
-<b>3.</b> Tap on a <b>channel</b><br>
+[[Image:Server_icons.png|1000px|frame|center]]
-<b>4.</b> When selected, a channel window appears. Click on <b>TOOLBOX</b></b><br>
-<b>5.</b> When <b>TOOLBOX</b></b> is opened, a new screen appears, where records from the device sent to the channel can be seen<br>
-<b>6.</b> Click on icon, which is at the bottom right side as shown in the picture below<br>
-[[Image:Server_icons.png|1000px|frame|center]]<br>
-<b>7.</b> In the search field, search for <b>ble.beacons</b> parameter<br>
+<b>7.</b> In the search field, search for <b>ble.beacons</b> parameter<br><b>Click on the eye button to add a column</b><br>
-<b>Click on the eye button to add a column</b><br>
+[[Image:BLE_BEACONS_FLESPI.png|1000px|frame|center]]
-[[Image:BLE_BEACONS_FLESPI.png|1000px|frame|center]]<br>
 <b>8.</b> If everything is done correctly, at the bottom, a new recently added column is visible: <b>ble.beacons</b>
-[[Image:Blebeacons_column.png|1000px|frame|center]]<br>
+[[Image:Blebeacons_column.png|1000px|frame|center]]
 <b>9.</b> Beacon data is sent to flespi platform, where beacon UUID can be seen and its radio signal strength
-[[Image:Ble_beacon_packet.png|1000px|frame|center]]<br>
+[[Image:Ble_beacon_packet.png|1000px|frame|center]]
-[[Category: Fleet Management platforms]]
+[[Category: Flespi with Fleet Management (FM)]]