Difference between revisions of "FMC650 and Tachograph Solution"
(One intermediate revision by one other user not shown) | |||
Line 1: | Line 1: | ||
==Introduction== | ==Introduction== | ||
− | Teltonika [https://ddd.teltonika.lt WEB Tacho] is an online service that allows remotely downloading Tachograph files from supported tachographs. The solution is a big forward leap in remote tachograph data files download, manageable, and does not require any complex software* installation. Everything is accessible via the web page. Now you can download tachograph files from any place and from any PC via internet access. | + | Teltonika [https://ddd.teltonika.lt WEB Tacho] is an online service that allows remotely downloading Tachograph files from supported tachographs. The solution is a big forward leap in remote tachograph data files download, manageable, and does not require any complex software* installation. Everything is accessible via the web page. Now you can download tachograph files from any place and from any PC via internet access. FMC650 device has a possibility to connect to Web Tacho IP every 1 hour and check if there are any schedules for downloading DDD files. If FMC650 connects to the Web tacho server, and there is a planned schedule but another device is already downloading and the company card is in use, the device |
keeps a link with the Web Tacho server but still sends data to the main server with AVL data. After | keeps a link with the Web Tacho server but still sends data to the main server with AVL data. After | ||
successful download, the device closes the link with Web Tacho and reconnects after 1 hour. Data is | successful download, the device closes the link with Web Tacho and reconnects after 1 hour. Data is | ||
Line 8: | Line 8: | ||
===<u>'''IMPORTANT''' notice regarding '''EU''' '''Directive''' for Tachograph usage starting '''from year''' '''2023'''</u>=== | ===<u>'''IMPORTANT''' notice regarding '''EU''' '''Directive''' for Tachograph usage starting '''from year''' '''2023'''</u>=== | ||
− | New tachographs '''Smart tachograph version 2''' for new heavy vehicles will be mandatory from '''21<sup>st</sup> August, 2023''' and for light commercial vehicles from '''1<sup>st</sup> July, 2026'''. These tachographs are designed and developed because of new changes in Regulation (EU). The communication for supporting '''SMART TACHOGRAPH VERSION 2''' were implemented ONLY for new devices '''FMC650''', '''FMM650''', '''FMB641''' | + | New tachographs '''Smart tachograph version 2''' for new heavy vehicles will be mandatory from '''21<sup>st</sup> August, 2023''' and for light commercial vehicles from '''1<sup>st</sup> July, 2026'''. These tachographs are designed and developed because of new changes in Regulation (EU). The communication for supporting '''SMART TACHOGRAPH VERSION 2''' were implemented ONLY for new devices '''FMC650''', '''FMM650''', '''FMB641'''. |
For '''FMC650''' DDD download feature from new tachographs would be available from '''03.00.14.rev.07'''. | For '''FMC650''' DDD download feature from new tachographs would be available from '''03.00.14.rev.07'''. | ||
Line 159: | Line 159: | ||
==Internal links== | ==Internal links== | ||
− | https://teltonika-gps.com/product/tachograph-web/ <br />[https://teltonika-gps.com/ | + | https://teltonika-gps.com/product/tachograph-web/ <br />[https://teltonika-gps.com/product/FMB641 https://teltonika-gps.com/product/FMC650] / <br />[https://wiki.teltonika-gps.com/view/FMB641 https://wiki.teltonika-gps.com/view/FMC650] |
Revision as of 11:37, 12 July 2023
Introduction
Teltonika WEB Tacho is an online service that allows remotely downloading Tachograph files from supported tachographs. The solution is a big forward leap in remote tachograph data files download, manageable, and does not require any complex software* installation. Everything is accessible via the web page. Now you can download tachograph files from any place and from any PC via internet access. FMC650 device has a possibility to connect to Web Tacho IP every 1 hour and check if there are any schedules for downloading DDD files. If FMC650 connects to the Web tacho server, and there is a planned schedule but another device is already downloading and the company card is in use, the device
keeps a link with the Web Tacho server but still sends data to the main server with AVL data. After
successful download, the device closes the link with Web Tacho and reconnects after 1 hour. Data is
stored on a secure server and can be accessed only by your authorized users.
You don't need to worry that any file is lost and you have to download it from tachograph once again.
*– requires company card reader software installation on a single company PC
IMPORTANT notice regarding EU Directive for Tachograph usage starting from year 2023
New tachographs Smart tachograph version 2 for new heavy vehicles will be mandatory from 21st August, 2023 and for light commercial vehicles from 1st July, 2026. These tachographs are designed and developed because of new changes in Regulation (EU). The communication for supporting SMART TACHOGRAPH VERSION 2 were implemented ONLY for new devices FMC650, FMM650, FMB641.
For FMC650 DDD download feature from new tachographs would be available from 03.00.14.rev.07.
Supported tachographs and formats
The solution supports not only the standard DDD file extension but also Spanish TGD and French V1B, C1B file formats. You simply set the required one in Web Tacho user settings.
NOTE: To check whether the VDO tachograph is supported or not, Teltonika Tachograph Lookup can be used.
Supported devices are:
Siemens VDO Digital Tachograph
Siemens VDO Digital Tachograph – DTCO 1381 (release 1.3a, 1.4 or later):
the version can be checked on tachograph or in the printout (Technical data: printout -> vehicle -> techn. data) as shown in pictures below:
Tachograph Part number - 1381.1234567890 is indicated in blue color - you can use TachoLookup(Tachograph Lookup) to doublecheck if tachograph is supported.
Software version V1420 indicates that tachograph is version (release) 1.4.
The same information can be found behind the print cabinet label and on the label on the back of the tachograph:
Stoneridge Tachograph
Stoneridge Tachograph – SE5000 (release 7.1 or later). The version can be checked on tachograph or in the printout (Daily Driver printout on the left: PRINT -> 24h card/ Technical data on the right: PRINT -> technical data) as shown in pictures below:
Tachograph part number is indicated in blue 900588RA/37R01 "RA" indicates that this is 8th revision. Other revisions can be checked by looking at number after "R", for example R7.1 - Revision 7.1. You can use TachoLookup(Tachograph Lookup) to doublecheck if tachograph is supported.
Intellic EFAS version 4
Intellic EFAS 4 - we support EFAS-4 tachographs from version 4.5. Supported tachographs can be identified by the first 6 digits of “EU-serial code” and should start with: E4T010, E4T012, E5T018, E5T020 as shown in the printout (Technical data: Printout ->Technical data) example bellow:
Required numbers are indicated in blue color E4T010 e1222 010.0000123456 this is a combination of Device part number and serial code. You can use Tachograph lookup (Tachograph Lookup) to check if tachograph is supported - enter the combination without e1-222 part and dots: E4T0100100000123456
This information can be found on the tachograph label as well:
Remote Data Download (RDD) via FMS
When RDD (Remote Data Download) signal available on FMS.
Applies to:
- DAF CF - LF - XF
- IVECO Stralis I / II/ Hi-Way
- Renault D / Magnum DXI & E-TECH / Midlum DXI / Premium DXI / Renault T-K-C
- Volvo FH - FM - FL
If the RDD signal is available on the FMS interface, no additional connection is required. In this case, the CANx LOW and HIGH wires from the FMx640 are connected to PIN 6 and 9 on the FMS connector. Additionally, PIN 10 can be used for ignition detection using DIN1 wire.
More information about FMS CABLE can be found on Teltonika Page
For the following vehicles regarding the RDD, please contact the manufacturer:
- MAN TGX - TGA - TGL - TGM
- Mercedes Actros / Antos / Atego / Arocs / Axor II
- Scania R - P - G - S
If the RDD signal is NOT available on the FMS interface, you need to retrieve the RDD data by connecting to the tachograph's C connector using provided instructions below.
Connecting to tachograph
Before connecting tachograph wires, it is required to measure CAN line resistance
while tachograph is switched off:
- Turn off the vehicle ignition;
- Measure resistance between the C5 (CAN2 H) and C7 (CAN2 L) contacts;
- If the multimeter shows ~120 Ohms, skip the next step;
- If the multimeter shows kilo Ohms resistance then it is needed to connect tachograph C8 (CAN-RES) and C7 (CAN2 L) contacts with wire and then perform further actions;
- Re-measure the resistance of the line – it has to be ~120 Ohms.
- Connect CAN2 L and CAN2 H wires to tachograph (C5 (CAN2 H) and C7 (CAN2 L))
- All of the same level CAN-L and CAN-H wires must be interlaced with each other.
- CAN wire needs to be installed as far as possible from the GSM antenna.
Below is a wiring diagram of the Tachograph and FMC650 device:
Checking connection (Tachocheck SMS)
After successful connection tachocheck SMS message can be sent to the device for checking if
data presented on connected lines, in other words, if connections were done correctly. It is
used for getting status information. SMS response is of such structure:
CAN_2:[TRC],[ABCD], K-Line:[K]
[T] – Tachograph presence on the bus:
- 0 – Tachograph doesn’t respond on the bus;
- 1 – Tachograph responds on bus.
[R] – Response to Open Remote Session validity check:
- 0 – Wrong or unknown response (failed to open Remote Session);
- 1 – Tachograph responds positively (Remote Session opened successfully).
[C] – Response to Close Last Authentication Session validity check:
- 0 – Wrong or unknown response (failed to close last authentication session);
- 1 – Last authentication session closed successfully, the device is ready to open a new authentication session.
[K] – K-Line data presence on the bus:
- 0 – K-Line data not present on the bus;
- 1 – K-Line data present on bus.
[ABCD] – FMS data presence on the bus:
- 0000 – FMS data not present on the bus;
- Non-zero – FMS data detected on bus.
SMS answer which shows correct line connections looks like “CAN_2:[111],[ABCD], K-Line:[K]”.
Such SMS answer means DDD files can be downloaded from tachograph.
Configuring device
In FMC650 configurator “CAN/Tachograph” section tachograph settings should be set in order to download files.
Tachograph settings:
DDD download source – to which CAN line tachograph is connected;
Tachograph ignition source – which DIN is connected to vehicle ignition ("Ignition" parameter - tachograph ignition source will be the same as configured in "System" -> "Ignition Source");
WEB Tacho Settings:
Status - functionality enabling;
Domain – server domain where files will be send;
Port – server port where files will be send;
Start delay – delay after turning on ignition to start procedure of file sending.
Internal links
https://teltonika-gps.com/product/tachograph-web/
https://teltonika-gps.com/product/FMC650 /
https://wiki.teltonika-gps.com/view/FMC650