65
edits
Changes
no edit summary
* FMC640 CAN1 connected to vehicle's FMS(J1939) BUS line<br>
* FMC640 CAN1 connected to vehicle's FMS(J1939) BUS line<br>
* FMC640 CAN2 connected to vehicle's Tachograph - Instructions can be found on [[FMC640_and_Tachograph_Solution|FMC640 and Tachograph Solution]] wiki page;
* FMC640 CAN2 connected to vehicle's Tachograph - Instructions can be found on [[FMC640 and Tachograph Solution]] wiki page;
==Tachograph Settings==
==Tachograph Settings==
Tachograph ignition source – which DIN is connected to vehicle ignition ("Ignition" parameter - tachograph ignition source will be the same as configured in "System" -> "Ignition Source");<br />
Tachograph ignition source – which DIN is connected to vehicle ignition ("Ignition" parameter - tachograph ignition source will be the same as configured in "System" -> "Ignition Source");<br />
<br />
<br />
Download alternative DDD card files - enables the possibility to download specific DDD driver and co-driver card data from non-original locations. It may include last download information;<br />
<br />
Alternative tacho settings – device will automatically change tachograph address, which can be useful, when additional devices are connected to the tachograph;<br />
[[image:FMB640_Tachograph_settings2.gif]]
[[image:FMB640_Tachograph_settings2.gif]]
<br />
FMC640 can be wired to Tachograph using instructions provided in [[FMC640 and Tachograph Solution]] wiki page.<br />
<br />
NOTE: Alternative DDD download '''WILL NOT''' work with GEN2 Tachographs (VDO 4.0 or Stoneridge SE5000 8.0)
By default, this parameter is DISABLED.
==WEB Tacho Settings==
==WEB Tacho Settings==
