Difference between revisions of "Template:FTX8XX/9XX Device Status"

From Wiki Knowledge Base | Teltonika GPS
(32 intermediate revisions by 3 users not shown)
Line 2: Line 2:
 
==Device information==
 
==Device information==
 
[[File:FTC DEVICE STATUS RESIZED AUTO.gif|right]]
 
[[File:FTC DEVICE STATUS RESIZED AUTO.gif|right]]
 +
 
'''Device name''' — Device Hardware name/model
 
'''Device name''' — Device Hardware name/model
  
Line 8: Line 9:
 
'''Firmware version'''— current device firmware version.
 
'''Firmware version'''— current device firmware version.
  
'''Last start time (UTC)''' - Time when the device was turned on, GMT+0.
+
'''Last start time''' - Time when the device was turned on.
  
'''RTC time (UTC)''' - Device internal time, GMT+0.
+
'''RTC time''' - Device internal time GMT+0.
  
 
'''Device uptime''' - Displays how long the device has been turned on.
 
'''Device uptime''' - Displays how long the device has been turned on.
Line 16: Line 17:
 
'''Power voltage''' - Voltage level of the external power supply connected to the device.
 
'''Power voltage''' - Voltage level of the external power supply connected to the device.
  
'''Ext storage (used / total)''' - Indicates how much memory the devices have left to store records.
+
'''Ext storage (used / total)''' - Indicates how much memory the devices has left to store records.
 +
 
 +
'''Battery voltage''' -
 +
 
 +
'''internal battery status''' - Display the internal battery level in percentage, as well as the current charging state of the battery.
 +
 
 +
 
 +
<br>
 +
 
 +
==Cellular information==
 +
===cellular status===
 +
[[File:Cellular info 1.jpeg|right|500px]]
 +
 
 +
'''Modem version''' - Connectivity module modem version
 +
 
 +
'''Modem status''' - Displays the status of the modem (ON/OFF/Sleep)
 +
 
 +
'''Network status''' - Displays the GPRS status of the device
 +
 
 +
'''Sent data''' - Specifies the amount of data that was sent from the device to the server, in Bytes.
 +
 
 +
''' Received data''' - Specified the amount of data that was received from the server to the device, in Bytes.
 +
 
 +
'''Total traffic''' - Specifies the total data traffic, in Bytes.
 +
 
 +
===Socket 1===
 +
 
 +
'''Type''' - Shows the socket type. RecSend (primary server)
 +
 
 +
===Socket 2===
  
'''Battery voltage''' - Indicates the voltage of the internal battery in the device.  
+
'''Type''' - Displays the socket type. RecSendBackup (backup server)
  
'''Internal battery status''' - Display the internal battery level in percentage, as well as the current charging state of the battery.
+
===Records===
 +
[[File:FTC Records.jpg|right|500px]]
 +
'''Sent records count''' - displays how many records have been sent since device power up
  
'''Export''' - has the option to export the device's current statuses (Device Info, GSM Info, GNSS Info, I/O Info, and External I/O Info) into HTML format.
+
'''Last record send''' - specifies when the latest record was sent to the server
  
 +
'''Last server response time''' - Specifies the time when the latest server acknowledgement was received by the device
  
<br>
 
  
==GNSS information==
 
[[File:FTC GNSS RESIZED AUTO.gif|right]]
 
  
'''GNSS version''' - Displays the firmware version of the GNSS module.
+
===SMS===
  
'''Module status''' - Displays the modem status (ON/OFF/Sleep).
+
'''Sent SMS''' - SMS sent by the device count
  
'''GNSS packets''' - The number of GNSS packets received by the GNSS receiver.
+
'''Received SMS''' - SMS received by the device count
  
'''Fix status''' - Displays the status of the GNSS Fix.
+
'''SMS count''' - Total inbound/outbound SMS count by the device since device power up
  
'''Time to first fix''' - Specifies the time, in seconds, of how long it took the device to obtain a GNSS Fix from a cold start.
 
  
'''Time to last fix''' - Specifies the time, in seconds, of how long it took the device to obtain the most recent GNSS Fix.
+
==SIM security==
  
'''Satelites''' - Displays the number of '''Visible''' and '''In use''' navigation satellites from different navigation systems
+
Displays the status of the SIM Card. Contains information whether the SIM is inserted, whether PIN is required.
  
'''Location''' - Displays the information about current '''Latitude/Longitude''', '''Altitude''', '''Speed''' and '''Angle''' as well as the current device position on a map.
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
  
  
==Cellular information==
 
[[File:Cellular Information.png|right|500px]]
 
  
'''Modem version''' - The modem version of the GSM module
 
  
'''Modem status''' - Displays the status of the modem (ON/OFF/Sleep)
 
  
'''Network status''' - Displays the GPRS status of the device
+
==GNSS information==
 +
[[File:FTC GNSS RESIZED AUTO.gif|right]]
  
''' Current operator code''' - Specified current SIM-card operator code.
+
'''GNSS version''' displays the firmware version of the GNSS module
  
'''Signal Level''' - Specifies the current signal strength of the connected network.
+
'''Module status'''
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
  
 +
'''GNSS packets''' Number of GNSS packets received by the GNSS receiver
  
==SIM Security==
+
'''Fix status''' Displays the status of the fix
[[File:SSim Security.png|right|500px]]
 
  
*The state and status of the currently connected SIM card can be observed here. If a SIM card with a PIN code is used, the user can enter it in this section. The remaining attempts to enter the PIN code are shown as well.
+
'''Time to first fix''' specifies the time, in seconds, of how long it took the device to obtain a GNSS fix from cold start
*When the SIM PIN code is entered correctly, the user can change the PIN code or disable it from the SIM card. When SIM PIN is disabled and the user would like to enable it again, the user must enter the previously used PIN code.
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
  
 +
'''Time to last fix''' specifies the time, in seconds, of how long it took the device to obtain the most recent GNSS fix
  
==Maintenance==
+
'''Satelites'''
[[File:Maintenance latest.png|right|500px]]
 
  
'''Dump''' - after the button is pressed, the device starts downloading .dmp logs and configuration .cfg from the device in a compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FTCXYX}}}_IMEI_Dump.zip</code><br>Default directory: <code>C:\Users\user_name\AppData\Roaming\Teltonika\TCT\logs</code><br>Dump files can be read only with special software. If needed, provide these files for analysis to your Teltonika sales manager or Teltonika Support team.</p>
+
Displays the number of '''Visible''' and '''In use''' navigation satellites from different navigation systems
'''Open file''' - this new tab opens at the bottom of the page after downloading the Dump.
 
  
  
 
[[Category:{{{model|}}} Configuration]]
 
[[Category:{{{model|}}} Configuration]]

Revision as of 14:07, 30 August 2023

Configuration > Template:FTX8XX/9XX Device Status

Device Status displays information about the device. It also provides an option to update the device firmware version. firmware errata

Device information

FTC DEVICE STATUS RESIZED AUTO.gif

Device name — Device Hardware name/model

IMEI — Device International Mobile Equipment Identity number.

Firmware version— current device firmware version.

Last start time - Time when the device was turned on.

RTC time - Device internal time GMT+0.

Device uptime - Displays how long the device has been turned on.

Power voltage - Voltage level of the external power supply connected to the device.

Ext storage (used / total) - Indicates how much memory the devices has left to store records.

Battery voltage -

internal battery status - Display the internal battery level in percentage, as well as the current charging state of the battery.



Cellular information

cellular status

Cellular info 1.jpeg

Modem version - Connectivity module modem version

Modem status - Displays the status of the modem (ON/OFF/Sleep)

Network status - Displays the GPRS status of the device

Sent data - Specifies the amount of data that was sent from the device to the server, in Bytes.

Received data - Specified the amount of data that was received from the server to the device, in Bytes.

Total traffic - Specifies the total data traffic, in Bytes.

Socket 1

Type - Shows the socket type. RecSend (primary server)

Socket 2

Type - Displays the socket type. RecSendBackup (backup server)

Records

FTC Records.jpg

Sent records count - displays how many records have been sent since device power up

Last record send - specifies when the latest record was sent to the server

Last server response time - Specifies the time when the latest server acknowledgement was received by the device


SMS

Sent SMS - SMS sent by the device count

Received SMS - SMS received by the device count

SMS count - Total inbound/outbound SMS count by the device since device power up


SIM security

Displays the status of the SIM Card. Contains information whether the SIM is inserted, whether PIN is required.




GNSS information

FTC GNSS RESIZED AUTO.gif

GNSS version displays the firmware version of the GNSS module

Module status

GNSS packets Number of GNSS packets received by the GNSS receiver

Fix status Displays the status of the fix

Time to first fix specifies the time, in seconds, of how long it took the device to obtain a GNSS fix from cold start

Time to last fix specifies the time, in seconds, of how long it took the device to obtain the most recent GNSS fix

Satelites

Displays the number of Visible and In use navigation satellites from different navigation systems