Changes

When no I/O element is enabled, AVL packet comes with GNSS information only. After enabling I/O element(s) AVL packet contains current value(s) of enabled I/O element(s) along with GNSS information.

When no I/O element is enabled, AVL packet comes with GNSS information only. After enabling I/O element(s) AVL packet contains current value(s) of enabled I/O element(s) along with GNSS information.

[[File:IO.gif|center|thumb|1100x1100px]]

[[File:IO.gif|center|thumb|1100x1100px]]

==Permanent I/O==  

==Input Name==  

I/O element name.

I/O element name.

==Current Value==  

==Current Value==  

If the device is connected to the '''Configurator''', then all the current I/O values can be seen here.

If device is connected to '''Configurator''' all current I/O values are displayed in this column. Also I/O current values can be seen in [[{{{model|FMB1YX}}}_Status_info#I.2FO_Info|Status→I/O Info]] tab.

 

==Units==

==Units==

Units of measurement.

Units of measurement.

==Priority==

==Priority==

This field allows the enabling of the I/O elements and sets them a priority so they are added to the data packet, which are sent to the server. By default '''{{{txt_count|8}}} I/O elements''' with '''Low priority''' are enabled: <code> {{{txt_elems| Ignition}}}, Movement, GSM Signal, {{{txt_elems| External Voltage, Battery Voltage, Battery Current, Total Odometer}}}, Digital Output 1 Overcurrent</code>. All records made by {{{model|FTX9XX}}} are regular, and regular packets are sent as low priority records.<p>Priority level (AVL packet priority) can be:</p>  

This field allows to enable I/O elements and setting them a priority so they are added to the data packet, which is sent to the server. By default '''{{{txt_count|12}}} I/O elements''' with '''Low priority''' are enabled: <code> {{{txt_elems| Ignition}}}, Movement, Data Mode, GSM Signal, Sleep Mode, GNSS Status, GNSS PDOP, GNSS HDOP, {{{txt_elems| External Voltage, Speed, Battery Current}}}, Battery Voltage</code>. All records made by {{{model|FMB1YX}}} are regular, and regular packets are sent as low priority records.<p>Priority level (AVL packet priority) can be:</p>  

===None Priority===

===None Priority===

Module doesn't make additional record.

Module doesn't make additional record.

===Low Priority===

===Low Priority===

Module makes an additional record with an indication that the '''event was caused by an I/O element change''' (depending on [[#Operands|Operands]] configuration).

Module makes an additional record with an indication that the '''event was caused by an I/O element change''' (depending onas [[#Operands|Operands]] configuration).

===High Priority===

===High Priority===

Module makes an additional record with High priority flag and '''sends event packet immediately''' to the server using '''GPRS'''.

Module makes an additional record with High priority flag and '''sends event packet immediately''' to the server using '''GPRS'''.

 

==High and Low Level==

==High and Low Level==

These levels define I/O value range. If I/O value '''enters or exits''' this range, {{{model|FTX9YX}}} '''generates an event'''.

These levels define I/O value range. If I/O value '''enters or exits''' this range, {{{model|FMB1YX}}} '''generates an event'''.  

 

==Event Only==  

==Event Only==  

When this is selected, I/O element status value will be '''appended only to eventual records''', otherwise I/O element status value will appear in each AVL record.

When this is selected, I/O element status value will be '''appended only to eventual records''', otherwise I/O element status value will appear in each AVL record.