| Line 1: |
Line 1: |
| − | ==Mobile data settings==
| + | {{Template:FTX8XX/9XX Mobile Network|model=FTC921}} |
| − | [[File:FTC921_Mobile_data_settings.png|right|300 px]]
| |
| − | These settings define the main parameters for {{{model|FTC961}}}. <br/ >
| |
| | | | |
| − | '''APN:'''
| |
| − | *Access point name, a mandatory parameter which is used to connect to the internet (GPRS). Access Point Name is the name of a gateway between a mobile operator and the public internet. It can be obtained from your SIM card provider.
| |
| − | '''APN Username:'''
| |
| − | *Access point name username (optional – depending on operator)
| |
| − | '''APN Password:'''
| |
| − | *Access point name password (optional – depending on operator). <br>
| |
| − | '''Authentication type:'''
| |
| − | * Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator. <br />
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − | ==Server settings==
| |
| − | [[File:FTC921_Server_settings.png|right|300 px]]
| |
| − | '''Domain:'''
| |
| − | *Server or Domain address, can be written either IP address or Domain.
| |
| − | '''Port:'''
| |
| − | *Server Port
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − | ==Server communication settings==
| |
| − | [[File:FTC921_Server_communication_settings.png|right|300 px]]
| |
| − | '''Open link timeout:'''
| |
| − | *The parameter used to define a timeout between the fleet management device and the server. If the device has sent all records, device holds the link for duration of the confugured timeout. “Open link timeout” will refresh after device sends a new record. If there is a need to keep a constant link with a server, increasing the value of the parameter is needed.
| |
| − | '''Response timeout:'''
| |
| − | *Is used to set a period of time waiting for the response from the server-side. If there is no response from the server during the timeout, the device will close the link and according to device configuration resend the same packet.
| |
| − | [[File:Alert.png|left|20px|link=]] NOTE! If Data [[Codec|protocols]] are not implemented correctly, device will not send data correctly. <br>
| |
| − | '''Keep-alive ping Timeout:'''
| |
| − | *Enables network ping after timeout to prevent link close by operator. For example, if the operator closes the active link after 15 minutes when no data is sent, you can set the "network ping" timeout to 10 minutes then the device sends a 0xFF byte to server to keep the link open. This functionality works only for Record and Backup Servers. '''Network Ping Timeout should be always lower than Open Link Timeout.'''
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − |
| |
| − | ==FOTA WEB settings==
| |
| − | [[File:FTC921_FOTA_WEB_settings.png|right|300 px]]
| |
| − | These settings are used to configure FOTA WEB server connection parameters. <br>
| |
| − | '''Status:'''
| |
| − | *Enables or disables FOTA WEB functionality. '''If FOTA WEB Status is set to "Disable" - the configuration will not be allowed to be uploaded into FOTA WEB.'''
| |
| − | '''Domain:'''
| |
| − | *The address of the FOTA website is entered to Domain field.
| |
| − | '''Port:'''
| |
| − | *The Port of the FOTA website is entered to Port field.
| |
| − | '''Period:'''
| |
| − | *Is used to set the timeout of repeat connections to the FOTA WEB server.<br>
| |
| | | | |
| | [[Category:FTC961 Configuration]] | | [[Category:FTC961 Configuration]] |
