Difference between revisions of "Parameters Update"

From Wiki Knowledge Base | Teltonika GPS
m (Protected "Parameters Update" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
Line 11: Line 11:
 
|Default value in 03.29.XX firmware versions
 
|Default value in 03.29.XX firmware versions
 
|-
 
|-
|113
 
|Data Protocol
 
|0 - (Codec 8)
 
|1 - (Codec 8 Extended)
 
 
|-
 
|-
 
|902
 
|902

Revision as of 14:07, 4 December 2023

Page defines configurator parameter changes in different base firmware versions.

Default Parameters Values Update in 03.29.00 firmware versions

Starting from firmware version 03.29.00.Rev.04 default values of some parameters were updated to provide more comfortable out of the box solution for all clients. List of parameter changes:

Parameter ID Name Default value in 03.27.XX firmware versions Default value in 03.29.XX firmware versions
902 Time Synchronization / NTP Server 1 avl1.teltonika.lt pool.ntp.org
903 Time Synchronization / NTP Server 2 pool.ntp.org time.nist.gov
102 Sleep Mode / Sleep Settings 2 - (Deep Sleep) 3 - (Online Deep Sleep)
103 Sleep Mode / Sleep Timeout (minutes) 1440 120
234 Assisted GPS Settings / Allow AGPS in Home Network 1 - (Enable) 0 - (Disabled)
11004 Eco/Green Driving / Max Acceleration (m/s^2) 2.50 2.31
11005 Eco/Green Driving / Max Braking (m/s^2) 2.70 2.52
11006 (Eco/Green Driving / Max Cornering (rad/s) 3.40 2.94
11502 Unplug Detection / Unplug Detection Mode 0 - (Simple) 1 - (Advanced)
11407 (Crash Detection / Duration (ms) 20 10
11406 Crash Detection / Crash Trace 0 - (Disable) 2 - (Trace Full)
20101,20121,20141, etc Manual Geofence / X geozone / Generate Event 0 - (No Event) 3 - (On Both)
11816 BT 4.0 / Scan retries until error (seconds) 30 10
45002 CAN Adapter / Program number 0 11120
11661 Towing / Data Acquisition Change 0 - (None) 1 - (Low)
40280 OBDII / Fuel Level / Priority 0 - (None) 1 - (Low)
40410 OBDII / VIN / Priority 0 - (None) 1 - (Low)
40440 OBDII / OEM Fuel Level / Priority 0 - (None) 1 - (Low)
40430 OBDII / OEM Total Mileage / Priority 0 - (None) 1 - (Low)
40420 OBDII / Fault Codes / Priority 0 - (None) 1 - (Low)
40410 OBDII / Number of DTC / Priority 0 - (None) 1 - (Low)
40400 (OBDII / Fuel Rate / Priority) 0 - (None) 1 - (Low)
40160 OBDII / Engine RPM / Priority) 0 - (None) 1 - (Low)
40170 OBDII / Vehicle Speed / Priority 0 - (None) 1 - (Low)
40110 OBDII / Engine Load / Priority 0 - (None) 1 - (Low)
40370 OBDII / Hybrid battery pack remaining life / Priority 0 - (None) 1 - (Low)
40120 OBDII / Coolant Temperature / Priority 0 - (None) 1 - (Low)
40230 OBDII / Distance traveled MIL on / Priority 0 - (None) 1 - (Low)

Removal of I/O elements' "Send SMS To" and "SMS Text" parameters in 03.29.00 firmware versions

Starting from firmware version 03.29.00.Rev.00 seperate "Send SMS To" and "SMS Text" parameters that were used for each of I/O elements and Manual Geofence were removed due to implemented rework. Newest iteration of "SMS Events" functionality now has seperate section with new options to configure preferred SMS Events and their text. Functionality changes defined in wiki page SMS events

Name Removed parameters New parameters in 03.29.XX firmware versions
SMS Text

I/O, CAN Adapter and OBDII Sections: 8000, 8001, 8002, 8003, 8004, 8005, 8006, 8007, 8008, 8009, 8010, 8011, 8012, 8013, 8014, 8015, 8016, 8017, 8018, 8019, 8020, 8021, 8022, 8023, 8024, 8069, 8070, 8116, 8117, 8118, 8119, 8120, 8121, 8122, 8123, 8124, 8125, 8126, 8127, 8128, 8129, 8130, 8131, 8132, 8133, 8134, 8135, 8136, 8137, 8138, 8139, 8220, 8243, 8250, 8376, 8038, 8039, 8040, 8041, 8042, 8043, 8044, 8045, 8046, 8047, 8048, 8049, 8050, 8051, 8052, 8053, 8054, 8055, 8056, 8057, 8058, 8059, 8060, 8061, 8062, 8063, 8633, 8064, 8065, 8066, 8067, 8068, 8524, 8525, 8526, 8527, 8264, 8241, 8522, 8529, 8628, 8634, 8635

Manual Geofence Section: 8025, 8026, 8027, 8028, 8029, 8071, 8072, 8073, 8074, 8075, 8076, 8077, 8078, 8079, 8080, 8081, 8082, 8083, 8084, 8085, 8086, 8087, 8088, 8089, 8090, 8091, 8092, 8093, 8094, 8095, 8096, 8097, 8098, 8099, 8100, 8101, 8102, 8103, 8104, 8105, 8106, 8107, 8108, 8109, 8110, 8111, 8112, 8113, 8114


9252, 9255, 9258, 9261, 9264, 9267, 9270, 9273, 9276, 9279
Send SMS To

I/O, CAN Adapter and OBDII Sections: 7000, 7001, 7002, 7003, 7004, 7005, 7006, 7007, 7008, 7009, 7010, 7011, 7012, 7013, 7014, 7015, 7016, 7017, 7018, 7019, 7020, 7021, 7022, 7023, 7024, 7069, 7070, 7716, 7117, 7117, 7119, 7120, 7121, 7122, 7123, 7124, 7125, 7126, 7127, 7128, 7129, 7130, 7131, 7132, 7133, 7134, 7135, 7136, 7137, 7138, 7139, 7220, 7243, 7250, 7376, 7038, 7039, 7040, 7041, 7042, 7043, 7044, 7045, 7046, 7047, 7048, 7049, 7050, 7051, 7052, 7053, 7054, 7055, 7056, 7057, 7058, 7059, 7060, 7061, 7062, 7063, 7663, 7064, 7065, 7066, 7067, 7068, 7524, 7525, 7526, 7527, 7264, 7241, 7522, 7529, 7628, 7634, 7635

Manual Geofence Section: 7026, 7027, 7028, 7029, 7071, 7072, 7073, 7074, 7075, 7076, 7077, 7078, 7079, 7080, 7081, 7082, 7083, 7084, 7085, 7086, 7087, 7088, 7089, 7090, 7091, 7092, 7093, 7094, 7095, 7096, 7097, 7098, 7099, 7100, 7101, 7102, 7103, 7104, 7105, 7106, 7107, 7108, 7109, 7110, 7111, 7112, 7113, 7114, 7115

9251, 9254, 9257, 9260, 9263, 9266, 9269, 9272, 9275, 9278
SMS Events AVL ID Not available before 9250, 9253, 9256, 9259 ,9262, 9265, 9268, 9271, 9274, 9277


Main list of currently used parameters and their description can be found in link Parameter list