FMB010 Status info: Difference between revisions

(10 intermediate revisions by 6 users not shown)

Line 1:

{{~~Template~~:~~FMB~~ Status ~~info~~|model=FMB010|~~txt_fmb0~~=}}

__TOC__

Status info enables the user to monitor real time information of {{{model|FMB010}}}. Following fields are displayed: '''Device Info''', '''GNSS Info''', '''GSM Info''', '''I/O Info''', '''Maintenance''' and etc. User is able to export all of the information to '''.HTML''' file using [[File:Export_html.png|15px|link=]] icon which is at the top right corner of the '''Device Info''' area.

[[Image:{{{model|FMB010}}} Beacon-info-{{{family|FMB0}}} series.png|1000px|none]]

==Device Info==

*Device Name

*Firmware version

*Last Start Time - last device start time.

*RTC Time - real time clock or current device time.

*Power Voltage (mV)

*Device IMEI

*External Storage (used/total) - {{{txt_memory|Internal Flash memory}}} free space.

*Device Uptime - device uptime from last start time.

{{{battery|* Battery Voltage (mV)

* Internal Battery Status - Charging/Not Charging}}}

==GNSS Info==

*GNSS status

**Module status - ON, [[{{{model|FMB010}}}_Sleep_modes#GPS_Sleep_mode|GPS Sleep]], [[{{{model|FMB010}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB010}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]], [[{{{model|FMB010}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] mode.

**GNSS packets - the amount of GNSS packets device received from startup.

**Fix Status - Fix/No Fix.

**Fix Time - the last GNSS fix time.

*Satellites

**Visible - the amount and type of satellites that are visible.

**In Use - the amount of satellites used for location positioning.

*Location

**Latitude/Longitude - shows current device coordinates and if you press them opens '''Object location''' window with map.

**Altitude, Angle

**HDOP, PDOP

**Speed - current device speed.

== HDOP/PDOP value calculation changes ==

{|

|[[File:Alert.png|left|link=|50px]]||From firmware version 03.27.06.Rev.01 HDOP/PDOP value calculation has been removed. DOP values are taken from GPGSA messages. DOP values are calculated according to constellations that are currently in use. Example: If we have 4 GNSS systems and there will be two in use then average will be calculated from two GNSS systems.

|}

Main calculations of separate HDOP/PDOP values of GPS, GLONASS, Galileo and BeiDou are made by GNSS modem. GNSS Modem already outputs average of HDOP/PDOP from 4 GNSS systems (Used satellites) with a formula below.

Calculation formula - ("GPS" + "GLONASS" + "Galileo (0-sat)" + "BeiDou (0-sat)") / 2 (four GNSS systems)**

Calculation formula - ("GPS" + "GLONASS") / 2 (two GNSS systems)

HDOP/PDOP will be different if it will have 19 and i.e. other packet with 6 satellites. In parsed regular AVL packet example below all of 19 satellites are shown as in use.

Parsed NMEA Record Example:

Record GPS longitude : -14116383

Record GPS latitude : 530738950

Record GPS altitude : 356

Record GPS angle : 357

Record GPS satellites: 19

Record GPS Kmh : 102

==GSM Info==

*GSM status

**Modem Status

**SIM State - Ready/Unknown

**GPRS Status - Activated/Deactivated

**Actual Operator Code

**Signal Level

*GPRS traffic

**Sent Data - the amount of data that has been sent by device.

**Received Data - the amount of data that has been received by device.

**Total Traffic - Sent Data + Received Data

*Sockets information:

**Type - AVL Data Sending

**Socket - Closed or Server domain and port which is used when sending AVL Data via TCP/UDP.

*Records

**Sent Records count - how many records were sent to the server since last data reset.

**Last Record Send - date and time when the last record was sent.

**Last Server Response Time - date and time when the last server response was.

*SMS Count

**Received SMS - the amount of SMS messages device has received.

**Sent SMS - the amount of SMS responses that were sent from the device.

**SMS Count - Received SMS + Sent SMS

==I/O Info==

*I/O Data - shows the current values from all configurable I/O elements.

{{{txt_hide_tmt250|==FMS I/O Info==

* FMS I/O Data - shows the current values from FMS configurable I/O elements.

==Tachograph Data Info==

* Tachograph Data - shows the current values from Tachograph Data configurable I/O elements.

}}}

==Maintenance==

*Log/Dump

**Log - after button is pressed, the device starts log capturing for 10 minutes with configuration download. After this time device .log and configuration .cfg will be in compressed archive. Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMB010}}}_IMEI_Log.zip</code> Default directory: <code>C:\Users\<username>\Documents</code>

[[File:logging.gif]]

**Dump - after button is pressed, the device starts to download .dmp logs and configuration .cfg from device in compressed archive. Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMB010}}}_IMEI_Dump.zip</code> Default directory: <code>C:\Users\<username>\Documents</code> Dump files can be read only with special software. If needed, provide these files to your Teltonika sales manager or Teltonika Support team.

**Open directory - this button appears near '''Log''' or '''Dump''' if one of these functions were used.

*Accelerometer - after button is pressed, the device starts to capture accelerometer values for 1 second.

{{{txt_obd|==OBD Info==

Shows the main OBD parameters with current values when the device is connected to the vehicle via OBDII socket or using [[{{{model|FMB010}}}_Bluetooth®_settings#How_to_connect_OBD_II_Bluetooth®_Dongle_to_FMB_device|OBDII Bluetooth® Dongle]].}}}

{{{txt_can|==CAN Adapter Info==

Shows the parameters with current values (including program number and software version) from CAN adapter when the device is connected to LV-CAN200/ALL-CAN300/CAN-CONTROL.}}}

[[Category:FMB010 Configuration]]