4,689
edits
Changes
Advanced Beacon Capturing Configuration (view source)
Revision as of 15:14, 6 December 2023
, 15:14, 6 December 2023Text replacement - "Bluetooth®®" to "Bluetooth®"
==Disclaimer==
[[File:Alert.png|left|link=]] <br> If you are not using Bluetooth®, '''please consider turning it off''' or '''change Bluetooth® PIN''' to remove potential risks.
If you are using Bluetooth® we strongly recommend '''using AES encryption''' for enhanced security.
==Beacon List Settings before FW ver. 3.27.07.Rev.00==
==Beacon List Settings before FW ver. 3.27.07.Rev.00==
This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br>
This page is dedicated for explanation of Bluetooth® settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br>
===Beacon Settings===
===Beacon Settings===
'''Beacon Record'''<br>
'''Beacon Record'''<br>
* '''''Eventual''''' – Record is sent after scan procedure is completed. This parameter depends from the [[{{{model|FMB120}}} Bluetooth 4.0 settings|'''Bluetooth 4.0 Scan Settings'''.]]<br>
* '''''Eventual''''' – Record is sent after scan procedure is completed. This parameter depends from the [[{{{model|FMB120}}} Bluetooth® 4.0 settings|'''Bluetooth® 4.0 Scan Settings'''.]]<br>
* '''''Periodic''''' – All beacons are sent to the server. (Record will be saved according to configured period).<br>
* '''''Periodic''''' – All beacons are sent to the server. (Record will be saved according to configured period).<br>
==Beacon List Settings after FW ver. 3.27.07.Rev.00==
==Beacon List Settings after FW ver. 3.27.07.Rev.00==
This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].
This page is dedicated for explanation of Bluetooth® settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].
===Beacon Settings===
===Beacon Settings===
[[File:NewBeaconSettings.png]]
[[File:NewBeaconSettings.png]]
==== EYE Sensor Capturing Configuration ====
==== EYE Sensor Capturing Configuration ====
As an example on how to set Beacons Capturing Configuration parameters EYE Sensor model can be used. Protocols used can be found here(link).
As an example on how to set Beacons Capturing Configuration parameters EYE Sensor can be used. Protocols used can be found [[EYE SENSOR / BTSMP1#Beacon and sensors data|here]](link).
[[File:Beacons Capturing Configuration set.png|thumb|1143x1143px|Parameter values]]
[[File:Beacons Capturing Configuration set.png|thumb|1143x1143px|Parameter values]]
[[File:Beacon temp marked.png|right|frameless|545x545px]]
[[File:Beacon temp marked.png|right|frameless|545x545px]]
Information shown after setting the parameters.
Information shown after setting the parameters. Red rectangle indicates configured EYE sensors.
[[File:Eddystone temperature.png|left|frameless|552x552px|Eddystone temperature]]
[[File:Eddystone temperature.png|left|frameless|552x552px|Eddystone temperature]]
<br></br>
<br></br>
<br></br>
<br></br>
<br></br>
<br></br>
<br>
<br></br>
* '''Name''' - Eddystone and iBeacon were typed to name different sensors.
*'''Manufacturer ID''' - is taken from protocol description, which can be found [[EYE SENSOR / BTSMP1#Beacon and sensors data|here]]. UUID and Type value is AAFE00 for Eddystone. CompanyID and Beacon Type are used for iBeacon which is 4C000215.
*'''Manufacturer ID Offset''' - passes 9bytes in advertising packet to indicate when Manufacturer ID starts. 5bytes for iBeacon.
*'''Manufacturer ID Size''' - number which indicates size of Manufacturer ID. 3bytes for Eddystone 4bytes for iBeacon.
*'''Beacon ID Offset''' - number used to indicate when Beacon ID starts in advertising packet.
*'''Beacon ID Size''' - number which indicates length of Beacon ID size. E.g. Instance ID is set in Eddystone and whole ID(UUID, Major, Minor) in iBeacon.
*'''Additional Data Offset''' and '''Additional Data Size''' - allows to capture specific data of the Beacons advertised packet e.g. Temperature.
*'''Beacon ID Source'''- configured ID output is shown in pictures. MAC address can be used as Source ID as well, in this case, It would be showed in ID section.
'''Note''': Due to differencies in iBeacon and Eddystone advertising packets, number of Additional Data offset is different as well.
===Beacon List===
===Beacon List===
|-
|-
|}
|}
[[Category: Frequently Asked Questions - FAQ]]
