Template:FMB Blue-tooth settings: Difference between revisions

Latest revision as of 09:42, 27 December 2023

Disclaimer

If you are not using Bluetooth®, please consider turning it off or change Bluetooth® PIN to remove potential risks.

If you are using Bluetooth® we strongly recommend using AES encryption for enhanced security.

General functionality

General functionality configures Bluetooth® to work in slave mode. This mode allows any external device to connect to FMB1YX.
Parameter BT Radio allows enabling or disabling Bluetooth®. There are three different settings:

Disabled – Bluetooth® functionality will be disabled.
Enable (hidden) – Bluetooth® functionality will be enabled, external devices will be able to connect to FMB1YX, but no devices will be able to detect it.
Enable (visible) – Bluetooth® functionality will be enabled and any external device will be able to detect and connect to FMB1YX.

It is possible to configure the Local name of the device, as well as the Local PIN, which will be used when trying to pair with the FMB1YX device. There are two different parameters:

Local Name parameter lets user declare a visible name of FMB1YX to external devices.
Local PIN parameter lets user configure Bluetooth® PIN of FMB1YX device.

The FMB1YX supports composed Bluetooth® Local names, which allows the user to have a predefined number of IMEI digits at the end of the device name. The format of the composed Bluetooth® name looks like this:

Device name + %imeiX

X - how many digits will be taken from IMEI to show in Local name, digits will be taken from the end of IMEI. Minimum value of X is 1 and the Maximum value is 15.

Example:
If the configured Local Name parameter is "FMB_120_%imei7" and the IMEI of the device is 352093089520901, name will be displayed as FMB_120_9520901 (whether "_LE" is added at the end depends on whether device supports BLE or not. The full name of the device, which supports BLE would be FMB_120_9520901_LE).
If the Local Name is written incorrectly, the Bluetooth® name of the device will be broadcasted as it is. An example can be seen below.

Example:
If the configured Local Name parameter is "FMB_120_%ime7" devices name will be broadcasted as FMB_120_%ime7 or if wrong X will be configured, for example "FMB_120_%imei20" devices name will broadcasted as FMB_120_%imei20.


	The Composed Bluetooth® name is supported from 03.25.05 firmware version.

FMB1YX Bluetooth® has several different Security Modes:

PIN only – only Local PIN will be reacquired to complete connection to FMB1YX.
PIN + MAC list – PIN and Authorized Devices MAC List will be checked against to allow connection to FMB1YX. If the external device MAC ID is in the list and correct Local PIN is entered then connection will be established, otherwise FMB1YX will reject connection.
MAC list only – only Authorized Devices MAC List will be checked when trying to connect to FMB1YX. If external device MAC ID is in the list then connection will be established, otherwise FMB1YX will reject connection.
None – neither Local PIN nor Authorized Device MAC List will be checked.

Auto Connect to External Device

Auto connection functionality configures FMB1YX as master device, which allows connecting FMB1YX to an external device. FMB1YX currently supports these modes:

None – disables auto connection functionality.
Hands Free or OBDII – FMB1YX starts searching for an external hands free headset or OBD II Dongle. If FMB1YX finds a device which matches user defined External MAC or External Name then FMB1YX will try to pair with that external device. If the external device asks for PIN then FMB1YX will send user defined External PIN. After successfully pairing FMB1YX will connect to paired device.

Data Link – BT Data link mode is enabled by Configurator Data Link parameter: when Data Link is configured and FMB has a link with the server, paired device can send messages via Bluetooth® SPP profile directly to the server. Messages will be encoded by Codec12.
Inateck Scanner – FMB1YX automatically connects to Inateck BT Barcode Scanner BCST-70 and will be ready to receive data (coded in barcode). Scanner must be configured for using “ENTER” as suffix. FMB1YX supports online and inventory mode. A new record will be generated on every data portion received from scanner via SPP. Data will be stored with AVL ID 264, variable data length, max length is 32 bytes. Note: Added from FW version 03.16.00.Rev.00+
User ID - This mode makes FMB1YX connect automatically to a device and stores its BT MAC address in I/O element User ID (I/O ID: 50520). This is used for driver authentication. If there‘s no connection, the I/O element value is set to 0.


	FMB1YX supports ONE connection at a time. FMB1YX can see up to 10 available devices. If there are more than 10 devices, the list may change with each new scan.

External Name parameter works as a substring, which allows user to enter a part of the full external device name. For example, if external device name is "HandsFreeHeadset" and user enters "HandsFree" in External Name parameter window, then FMB1YX will be allowed to connect to an external device named "HandsFreeHeadset".

@@ Line 1: / Line 1: @@
-==General functionality==
+__TOC__
-{{{pic_bt_general|[[Image:Fmb120_bt_general.png|300px|right]]}}}
+==Disclaimer==
-General functionality configures Blue-tooth to work in slave mode. This mode allows any external device to connect to {{{model|FMB1YX}}}.<br/>Parameter ''BT Radio'' allows enabling or disabling Blue-tooth. There are three different settings:
-* <span style=color:#F6A83E>Disabled</span> – Blue-tooth functionality will be disabled.
-* <span style=color:#F6A83E>Enable (hidden)</span> – Blue-tooth functionality will be enabled, external devices will be able to connect to {{{model|FMB1YX}}}, but no devices will be able to detect it.
-* <span style=color:#F6A83E>Enable (visible)</span> – Blue-tooth functionality will be enabled and any external device will be able to detect and connect to {{{model|FMB1YX}}}.<br/>''Local Name'' parameter lets user declare a visible name of {{{model|FMB1YX}}} to external devices.<br/>''Local PIN'' parameter lets user configure Blue-tooth PIN of {{{model|FMB1YX}}} device.<br/>
-{{{model|FMB1YX}}} Blue-tooth has several different ''Security Modes'':
-* <span style=color:#F6A83E>PIN only</span> – only Local PIN will be reacquired to complete connection to {{{model|FMB1YX}}}.
-* <span style=color:#F6A83E>PIN + MAC list</span> – PIN and Authorized Devices MAC List will be checked against to allow connection to {{{model|FMB1YX}}}. If the external device MAC ID is in the list and correct ''Local PIN'' is entered then connection will be established, otherwise {{{model|FMB1YX}}} will reject connection.
-* <span style=color:#F6A83E>MAC list only</span> – only ''Authorized Devices MAC List'' will be checked when trying to connect to {{{model|FMB1YX}}}. If external device MAC ID is in the list then connection will be established, otherwise {{{model|FMB1YX}}} will reject connection.
-* <span style=color:#F6A83E>None</span> – neither ''Local PIN'' nor ''Authorized Device MAC List'' will be checked.
-Auto connection functionality configures {{{model|FMB1YX}}} as master device, which allows connecting {{{model|FMB1YX}}} to an external device. {{{model|FMB1YX}}} currently supports these modes:
+[[File:Alert.png|left|link=]] <br> If you are not using Bluetooth®, '''please consider turning it off''' or '''change Bluetooth® PIN''' to remove potential risks.
-* <span style=color:#F6A83E>None</span> – disables auto connection functionality.
-* <span style=color:#F6A83E>Hands Free</span> {{{txt_hide|or <span style=color:#F6A83E>OBDII</span> }}}– {{{model|FMB1YX}}} starts searching for an external hands free headset. If {{{model|FMB1YX}}} finds a device which matches user defined ''External MAC'' or ''External Name'' then {{{model|FMB1YX}}} will try to pair with that external device. If the external device asks for PIN then {{{model|FMB1YX}}} will send user defined ''External PIN''. After successfully pairing {{{model|FMB1YX}}} will connect to paired device.
-* <span style=color:#F6A83E>Data Link</span> – BT Data link mode is enabled by Configurator ''Data Link'' parameter: when <span style=color:#F6A83E>Data Link</span> is configured and {{{model_2|FMB}}} has a link with the server, paired device can send messages via Blue-tooth SPP profile directly to the server. Messages will be encoded by codec12.
-{| class="wikitable" style="border-style: solid; border-width: 0px"
+If you are using Bluetooth® we strongly recommend '''using AES encryption''' for enhanced security.
-|+
+==General functionality==
-|-
-| style="text-align: left; background: #F6F6FB;"         | [[Image:Bw_nb.png|50px]]
-| style="text-align: left; background: #F6F6FB;"         | {{{model|FMB1YX}}} supports ONE connection at a time.<br/>{{{model|FMB1YX}}} can see up to 10 available devices. If there are more than 10 devices, the list may change with each new scan.
-|}
-''External Name'' parameter works as a substring, which allows user to enter a part of the full external device name. For example, if external device name is "HandsFreeHeadset" and user enters "HandsFree" in ''External Name'' parameter window, then {{{model|FMB1YX}}} will be allowed to connect to an external device named "HandsFreeHeadset".
+[[Image:FMB_Blue-tooth_settings.gif|{{{general|size}}}|right]]
+General functionality configures Bluetooth® to work in slave mode. This mode allows any external device to connect to {{{model|FMB1YX}}}.<br />Parameter ''BT Radio'' allows enabling or disabling Bluetooth®. There are three different settings:
-==How to connect Blue-tooth Hands Free adapter to {{{model_2|FMB}}} device==
+*<span style="color:#F6A83E">Disabled</span> – Bluetooth® functionality will be disabled.
+*<span style="color:#F6A83E">Enable (hidden)</span> – Bluetooth® functionality will be enabled, external devices will be able to connect to {{{model|FMB1YX}}}, but no devices will be able to detect it.
+*<span style="color:#F6A83E">Enable (visible)</span> – Bluetooth® functionality will be enabled and any external device will be able to detect and connect to {{{model|FMB1YX}}}.<br />
-{{{pic_bt_settings|[[Image:Fmb120_bt_settings.png|thumb|300px|right|Blue-tooth settings]]}}}
+It is possible to configure the Local name of the device, as well as the Local PIN, which will be used when trying to pair with the {{{model|FMB1YX}}} device. There are two different parameters:
-{{{pic_inc_call|[[Image:Fmb120_inc_call_action_settings.png|thumb|300px|right|Incoming Call Action settings under SMS/Call Settings]]}}}
-===Blue-tooth settings configuration===
-These are instructions on how to easily create a connection between a Blue-tooth Hands Free device and {{{model_2|FMB}}} device. First the {{{model_2|FMB}}} device Blue-tooth settings need to be configured. These are the required steps:
+*<span style="color:#F6A83E">Local Name</span> parameter lets user declare a visible name of {{{model|FMB1YX}}} to external devices.<br />
+*<span style="color:#F6A83E">Local PIN</span> parameter lets user configure Bluetooth® PIN of {{{model|FMB1YX}}} device.<br />
-* Press <span style=color:#F6A83E>Blue-tooth</span> settings (position 1).
+The {{{model|FMB1YX}}} supports composed Bluetooth® Local names, which allows the user to have a predefined number of IMEI digits at the end of the device name. The format of the composed Bluetooth® name looks like this:<br><br>
-* Turn on BT Radio by pressing <span style=color:#F6A83E>Enable (visible)</span> (position 2). ''Local name'' (position 3) will be "{{{model|FMB1YX}}}_last 7 imei digits" by default, which can be changed.
+<code>Device name + %imeiX</code><br><br>
-* Set ''Security Mode'' (position 4) to <span style=color:#F6A83E>PIN only</span> or <span style=color:#F6A83E>None</span>. <span style=color:#F6A83E>PIN + MAC list</span> or <span style=color:#F6A83E>MAC list only</span> security modes could also be selected, but in that case external device MAC address is required to be entered to ''Authorized Devices MAC List'' (position 7).
+X - how many digits will be taken from IMEI to show in Local name, digits will be taken from the end of IMEI. Minimum value of X is 1 and the Maximum value is 15.<br><br>
-* Set connection mode to <span style=color:#F6A83E>Hands Free</span> (position 5).
-* Set ''External Name'' (position 6) as your hands-free device name for proper identification. In the given example hands-free headset name is "DMH10" but at least 2 characters are required to recognize it and connect to it. For better and quicker adapter identification on the network you could enter a full device name. You could check your hands-free adapter Blue-tooth name by scanning nearby Blue-tooth devices using a mobile phone or a computer with Blue-tooth adapter.
-* Go to <span style=color:#F6A83E>SMS/Call Settings</span> in main menu and set ''Incoming Call Action'' to <span style=color:#F6A83E>Do Nothing</span> as shown on next figure.
-* After all these steps press <span style=color:#F6A83E>Save to device</span> to save configuration.
-* Now {{{model_2|FMB}}} device can be disconnected from the configurator.
-<br/><br/><br/><br/><br/><br/><br/><br/>
-===Connecting Blue-tooth Hands Free adapter===
+<strong>Example:</strong><br>
-----
+If the configured Local Name parameter is "FMB_120_%imei7" and the IMEI of the device is 352093089520901, name will be displayed as <strong>FMB_120_9520901</strong> (whether "_LE" is added at the end depends on whether device supports BLE or not. The full name of the device, which supports BLE would be <strong>FMB_120_9520901_LE</strong>).<br>
-Turn on hands-free device and then turn on its Blue-tooth connection for pairing following your model instructions. Hands-free adapter should make a specific sound in the speakers or its LED identification should inform about a successful connection. To check if the adapter is successfully connected, dial the {{{model_2|FMB}}} device phone number and the hands-free device should start ringing. If you later restart {{{model_2|FMB}}} device it will automatically reconnect to this adapter.
+If the Local Name is written incorrectly, the Bluetooth® name of the device will be broadcasted as it is. An example can be seen below.<br><br>
-==Logging the {{{model|FMB1YX}}} device using your mobile phone==
+<strong>Example:</strong><br>
+If the configured Local Name parameter is "FMB_120_%ime7" devices name will be broadcasted as <strong>FMB_120_%ime7</strong> or if wrong X will be configured, for example "FMB_120_%imei20" devices name will broadcasted as <strong>FMB_120_%imei20</strong>.
-Blue-tooth starts automatically when {{{model_2|FMB}}} device is on. Take your mobile phone, go to Settings->Blue-tooth and turn it on. Scan for nearby devices, find the device in the list, distinguish the device by last IMEI digits on device module. Press pair, wait until device asks to enter pairing password, type: ''"5555"'' (as in the example on the figure). Paired device will show up in the paired device list. Download  a terminal for Blue-tooth e.g. BlueTerm from Play Store/App store. Run app, click Find->Connect to your paired device. Now we need to send a command to {{{model|FMB1YX}}} from Blue-tooth terminal, type: ''".log:1"''<br/>Device will respond with ''"Debug enabled"'' and {{{model|FMB1YX}}} log will show up. Do not forget to save the log file to mobile phone.
+{| class="wikitable" style="border-style: solid; border-width: 0px"
+|+
+|-
+| style="text-align: left; background: #F6F6FB;" |[[Image:Bw_nb.png|50px]]
+| style="text-align: left; background: #F6F6FB;" |The Composed Bluetooth® name is supported from 03.25.05 firmware version.
+|}
-===Device debug over Android smartphone===
-{{{pic_bt_general_vis|[[Image:Fmb120_bt_general_vis.png|300px|right]]}}}
+{{{model|FMB1YX}}} Bluetooth® has several different ''Security Modes'':
-In order to pair {{{model_2|FMB}}} device with Android smartphone, make sure that BT radio is enabled (visible) in device configuration. It can be checked via SMS command too:<br/>''"getparam 800"''<br/>The answer has to be ''"2"'', which means "Enabled and visible".
+*<span style="color:#F6A83E">PIN only</span> – only Local PIN will be reacquired to complete connection to {{{model|FMB1YX}}}.
-<br/><br/><br/><br/><br/><br/><br/><br/><br/>
+*<span style="color:#F6A83E">PIN + MAC list</span> – PIN and Authorized Devices MAC List will be checked against to allow connection to {{{model|FMB1YX}}}. If the external device MAC ID is in the list and correct ''Local PIN'' is entered then connection will be established, otherwise {{{model|FMB1YX}}} will reject connection.
+*<span style="color:#F6A83E">MAC list only</span> – only ''Authorized Devices MAC List'' will be checked when trying to connect to {{{model|FMB1YX}}}. If external device MAC ID is in the list then connection will be established, otherwise {{{model|FMB1YX}}} will reject connection.
+*<span style="color:#F6A83E">None</span> – neither ''Local PIN'' nor ''Authorized Device MAC List'' will be checked.
-{{{pic_android_bt|[[Image:Android_bt.png|300px|right]]}}}
+==Auto Connect to External Device==
-* Scan for visible BT devices using your Android smartphone and connect to your {{{model_2|FMB}}} device.<br/>Default {{{model_2|FMB}}} BT name is: ''"{{{model|FMB1YX}}}_last_7_imei_digits"''.<br/>Default PIN code is: ''"5555"''.
+[[Image:Auto_Connect_to_External_Device.gif|{{{auto_connect|size}}}|right]]
+Auto connection functionality configures {{{model|FMB1YX}}} as master device, which allows connecting {{{model|FMB1YX}}} to an external device. {{{model|FMB1YX}}} currently supports these modes:
-<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/>
-* Download "Blue-tooth Terminal" application. Following link can be used: https://play.google.com/store/apps/details?id=com.hatflabs.btt
-{{{pic_android_bt_serial|[[Image:Android_bt_serial.png|300px|right]]}}}
-* Run "Blue-tooth Terminal", in menu press "Connect" and select paired {{{model_2|FMB}}} device. To start log check "CR" and enter the command into terminal: ''".log:1"''.
-* Wait ~10 minutes and press "Save" button in menu. You will find the saved log file in device folder "My Files/Blue-tooth Terminal", select log files, press "Share via Email" and send them to Teltonika support.
-<br/><br/>
+*<span style="color:#F6A83E">None</span> – disables auto connection functionality.
+*<span style="color:#F6A83E">[[How to connect Bluetooth® Hands Free adapter to FMB device|Hands Free]]</span> or <span style="color:#F6A83E">[[How to connect OBD II Bluetooth® Dongle to FMB device|OBDII]]</span> – {{{model|FMB1YX}}} starts searching for an external hands free headset or OBD II Dongle. If {{{model|FMB1YX}}} finds a device which matches user defined ''External MAC'' or ''External Name'' then FMB1YX will try to pair with that external device. If the external device asks for PIN then {{{model|FMB1YX}}} will send user defined ''External PIN''. After successfully pairing {{{model|FMB1YX}}} will connect to paired device.
-<gallery widths=100px perrow=3 caption="Saving and sharing the log">
+*<span style="color:#F6A83E">Data Link</span> – BT Data link mode is enabled by Configurator ''Data Link'' parameter: when <span style="color:#F6A83E">Data Link</span> is configured and {{{model_2|FMB}}} has a link with the server, paired device can send messages via Bluetooth® SPP profile directly to the server. Messages will be encoded by [[Codec#Codec 12|Codec12]].
-Image:Android_bt_log1.png
+*<span style="color:#F6A83E">Inateck Scanner</span> – {{{model|FMB1YX}}} automatically connects to Inateck BT Barcode Scanner BCST-70 and will be ready to receive data (coded in barcode). ''Scanner must be configured for using “ENTER” as suffix.'' {{{model|FMB1YX}}} supports online and inventory mode. A new record will be generated on every data portion received from scanner via SPP. Data will be stored with AVL ID 264, variable data length, max length is 32 bytes. '''''Note:''''' ''Added from FW version 03.16.00.Rev.00+''
-Image:Android_bt_log2.png
+*<span style="color:#F6A83E">User ID</span>  - This mode makes {{{model|FMB1YX}}} connect automatically to a device and stores its BT MAC address in I/O element ''User ID'' (I/O ID: 50520). This is used for driver authentication. If there‘s no connection, the I/O element value is set to 0.
-Image:Android_bt_log3.png
-</gallery>
-<br/><br/><br/><br/><br/>
 {| class="wikitable" style="border-style: solid; border-width: 0px"
 |+
 |-
-| style="text-align: left; background: #F6F6FB;"         | [[Image:Bw_nb.png|50px]]
+| style="text-align: left; background: #F6F6FB;" |[[Image:Bw_nb.png|50px]]
-| style="text-align: left; background: #F6F6FB;"         | Unfortunately it is not possible to perform debug the same way on iPhone, because there is no native SPP Blue-tooth profile support on iPhone.
+| style="text-align: left; background: #F6F6FB;" |{{{model|FMB1YX}}} supports ONE connection at a time.<br />{{{model|FMB1YX}}} can see up to 10 available devices. If there are more than 10 devices, the list may change with each new scan.
 |}
-{{{
+''External Name'' parameter works as a substring, which allows user to enter a part of the full external device name. For example, if external device name is "HandsFreeHeadset" and user enters "HandsFree" in ''External Name'' parameter window, then {{{model|FMB1YX}}} will be allowed to connect to an external device named "HandsFreeHeadset".
-para_obd|
-{{
-Template:FMB1 Blue-tooth OBD dongle
-|model={{{model|FMBXXX}}}
-|model_2={{{model_2|FMB}}}
-}}
-}}}
-==Blue-tooth 4.0 settings==
-FMB(FMT100) offers Blue-tooth 4.0 (Blue-tooth Low Energy, also referred as BLE) functionality. User is able to discover nearby BLE devices and their services. Another feature is TZ-BT04/05 sensor support. Sensors provide data about temperature (TZ-BT04 and TZ-BT05) and humidity (TZ-BT04 only).
-[[File:Blue-tooth 4.0 settings.PNG|thumb|left]]
+===Bluetooth® solutions===
-Configurable parameters:<br/>
+*[[How to connect Bluetooth® Hands Free adapter to FMB device|How to connect Bluetooth® Hands Free adapter to {{{model|FMB1YX}}} device]]
-* '''''TZ-BT04/05/05B Update frequency''''' – changes sensor's temperature/humidity/battery voltage data update frequency. <br/> Minimum value: 120 s, maximum value: 65535 s, default value: 120.
+*[[How to connect OBD II Bluetooth® Dongle to FMB device|How to connect OBD II Bluetooth® Dongle to {{{model|FMB1YX}}} device]]
-* '''''Working mode''''' – Blue-tooth connection mode. '''Disabled''': Blue-tooth 4.0 connection will not be used. '''TZ-BT04/05/05B sensor''': this blue-tooth connection will be used to communicate with TZ-BT04/05/05B sensor.
+*[[Logging the FMB1YX device using your mobile phone|Logging the {{{model|FMB1YX}}} device using your mobile phone]]